1, glass cleaning:
Use glass scraper, water wipe, bubble-free glass water and strong cleaning agent to thoroughly remove dirt (including window frame cleaning, protective film cleaning and window seam vacuum cleaning). The cleaning company reminds you to remove some stubborn cement spots with a glass spatula. There are antistatic ingredients in the potion, and the polished glass and window frame are crystal clear and free of dust.
2, comprehensive dustproof maintenance:
Use high-power vacuum cleaners and vacuum cleaners to wipe all materials, articles and furniture surfaces that are easy to attach dust, such as walls, countertops, heating covers, ceilings, decorative ceilings, various cabinets, screens and lamps, and then carry out professional maintenance. With the use of magnetic cleaner, stainless steel brightener, molten iron and cleaning wax, protective films can be coated on various materials to make them shine and make daily maintenance easier.
Step 3 clean the floor:
The surface of floor tile is treated by high-grade powerful floor washer and hard floor cleaner, and cleaned by vacuum water suction machine to make the floor clean and shiny.
4, kitchen and bathroom decontamination and disinfection:
Use acidic cleaning agents, high-efficiency degreasing agents, descaling agents, disinfectants and other professional drugs for special treatment, so that all kinds of equipment and appliances in the kitchen and bathroom are clean and bright, which is easier to care for.
5. Cleaning of decoration marks: the paint spots, glue marks, paint spots, cement blocks and pencil marks left after decoration are finely treated with special chemicals such as cleaning balls, professional shovels, glue remover and diluent.
6. Waxing treatment:
In order to protect the floor materials (wood floor, marble, granite, etc. For the surface that becomes expensive and fragile due to wear, it must be waxed. First, the ground is sealed with ground wax to isolate gas, water and dust, which makes it easier to clean and prevent wear, thus prolonging the service life and playing the role of scratch prevention and antistatic. Professionals wax, and the wax liquid is evenly distributed, with moderate thickness, bright and beautiful.
7, stone protection, crystal hard processing:
It is a more scientific, effective and convenient stone care technology, and its parameters are superior to the traditional waxing technology. The initial cost is higher than waxing, but the long-term care cost is lower. Using this technology can greatly improve the service life of stone and the effects of waterproof, oil-proof, antifouling, brightening and hardening.
Extended data:
Land reclamation cleaning generally refers to the first cleaning after the renovation (painting) of a new house, so it is also called post-renovation cleaning. After the house is decorated or painted, there will be a lot of construction waste and decoration waste left on the ground and wall tiles, such as cement blocks, paint spots (paint spots), glass glue and so on. The inside and outside of the cabinet will be covered with a layer of dust, and a lot of decoration garbage such as paint spots and cement blocks will be left on the glass.
Precautions:
Tool preparation: such as large vacuum cleaner, multifunctional floor cleaner, glass set tool, telescopic rod, ladder, bucket, duster, marble spatula, scraper, water sprayer, etc.
Pharmaceutical preparations: such as universal cleaning agent, glass cleaning agent, ceramic tile cleaning agent, ceramic sewing thread, adhesive remover, detergent, pickling agent, toilet cleaner, stainless steel cleaning agent, stainless steel brightener, furniture wax, etc.
Implementation standard:
Regarding the cleaning standards for land reclamation, cleaning companies across the country vary greatly, and customers generally only say "clean". After synthesizing most relevant information on the Internet, the following reference standards are more accurate and practical:
Standard of glass: no watermark, no handprint, no stain, bright and clean.
Standard of wall brick and floor: the wooden floor is clean and free of glue stains; Wall tiles and floor tiles are free of dust, paint spots and stains.
Land reclamation procedures:
1, clean up the decoration garbage left by the construction site first;
2. Fully vacuumize from top to bottom;
3. Wipe the glass: first clean the glass frame with a towel, then dip the diluted glass solution with a water sprayer, evenly smear the glass from top to bottom, remove stubborn stains with a shovel, then scrape it with a scraper from top to bottom after repeating the above procedures, wipe off the water marks left on the frame with a dry towel, and wipe off the water marks on the glass with a newspaper.
4. Bathroom: adhere to the principle of top-down, first recognize the material of the bathroom ceiling, whether it is PVC, aluminum-plastic board or paint, and then use different cleaning methods according to different materials; Clean the bathroom wall with a cleaning ball or brush, focusing on the cracks in the tile and the glue marks, paint spots and cement stains left on the surface of the tile; Wash the sanitary ware in the bathroom with a towel, and clean all kinds of faucets and pipe fittings with stainless steel cleaning solution; Use a floor washer to clean the floor tiles on the ground (the floor washer can't be used), especially the corners of the ground, and use cleaning balls and blades to remove the dirt and cement stains on the corners that the floor washer can't wash away; Finally, after checking that there are no omissions, wipe the faucet and other pipe fittings with a dry towel again.
5. Kitchen: The procedure is the same as above. Note: Because there are many stainless steel pipe fittings in the kitchen, it should be the focus of cleaning.
6. Bedroom and foyer: Dust the wall with a dust collector or vacuum cleaner, and wipe the lamps, switch boxes, smoke exhaust devices, air conditioning outlets, exhaust pipes, etc.
7. Door frame: distinguish the material of the door, dilute it with a professional cleaner and wipe it with a towel. The procedure is also from top to bottom, folding the towel into squares and wiping it from left to right from the top of the door, without omission. Where there is glue stain, it can be treated with glue remover; The procedure of the box is the same as the cleaning procedure of the same door, and there can be no omissions and dead ends.
8. Cleaning of the floor: After the completion, clean the floor, and the floor should be made of different materials, whether it is wooden floor, ceramic tile or stone. When identifying, choose a special cleaner to dilute and start cleaning. Glue stains on the ground can be removed with a blade, and stubborn ones can be treated with glue remover; After the completion of the last working procedure, the foreman should conduct a comprehensive inspection and confirm that there are no remnants before leaving the scene.
9. Corner line: Wipe with a towel and remove all kinds of glue marks and paint spots with a blade.
10, wall: wall cleaning should pay attention to the material, stone, wooden wall should pay attention to the impurities left by grinding.
Baidu Encyclopedia: Land Reclamation and Clearing