First, the choice of interval.
In the process of decoration, some areas often need to be reasonably divided into functional areas, so they need to be cut at intervals. At present, the commonly used partitions are: light steel keel gypsum board partition, stainless steel glass partition, aluminum-plastic plate tempered glass partition and pure tempered glass partition.
Second, the fire approval
For the sake of safety, don't neglect the fire fighting equipment. Fire fighting equipment needs to be submitted to the local fire station for approval before installation, and it needs to be submitted for approval after the project is completed. It takes about 10 days to complete the general fire control procedures, so you should consult the fire control company before decorating.
Third, pay attention to the ground materials.
The first thing to consider in plant decoration is the ground part. Generally, the floor for plant decoration does not need to bear the load, so we can consider using some inexpensive decorative materials, such as floor tiles or composite wood floors. Some factories should consider anti-static when decorating, so we should choose anti-static floor or anti-epoxy floor as the first choice for plant decoration, and some factories need the floor to bear the load when decorating. Then concrete will be made on the ground base. Concrete can be divided into two types: commercial concrete and soil concrete. The former is slightly higher in cost but stable in quality, while the latter is lower in price and average in quality. Then other hard stones can be laid on the concrete base as decorative materials.
Fourthly, reasonable top surface design.
In addition, pay attention to the top when decorating the factory building. The top of the factory building is generally relatively high, and most of them are steel frames. When decorating the top floor, first of all, we should design reasonable arrangements for fire fighting, ventilation and central air conditioning, because these are all necessary hardware facilities in plant decoration, especially fire fighting. The next step is to determine whether there is a ceiling according to the requirements of use. There are many materials in the ceiling of the factory building. If you want to be beautiful, you can decorate the top with mineral wool sound-absorbing board, gypsum board, aluminum-plastic board and other materials. You can also decorate some facilities that need to be hidden or unsightly at the top without any suspended ceiling, which is also a modern minimalist design.
Verb (abbreviation of verb) effective space segmentation
The division of the internal space of the factory is mainly for the operators to make rational use of the space according to their actual use needs. If there are many equipments in the factory, it is not advisable to set too many partitions and partitions. Try to use the color of the ground or some colored signs to divide the area. When dividing areas with signs, we should avoid too many color systems, which will not only make the division of areas not obvious, but also make people feel dizzy. Some factories can clearly divide the equipment area and the office area. This kind of planning is more common now because it is easy to manage. Then when designing such a factory building, it is necessary to master the close combination of data and various spaces, and also consider the smooth working distance between the equipment area and the office area and the interference of dust and noise.