2, can not be copied, because the environmental conditions in different places are different, and the pertinence is different, so we must do it in combination with the local environment. Taking the crown block as an example, there are specific operating procedures for lifting ladle in steelmaking production, and the crown block worker must pass the examination and obtain the certificate of crown block driver's license before operating the crown block. Before driving.
3. First of all, check whether the cart is flexible (and check the brake), check whether the car is flexible (and check the brake), check whether the large drum overwinding device is flexible, and check whether the small winch is flexible (without checking the overwinding protection of the small winch). Then, start to zero as a warning, and the crown will start.
4. Cleaning of ladle. After cleaning, the molten steel is put into the pit in front of the furnace to be filled with molten steel. Inspection of lifting tools should be carried out regularly, including wire rope inspection, hook inspection and ladle inspection. The ladle includes hanging beam, hanger and ladle body, as well as lifting structural parts (such as tanks and towers) used in metalworking.
5. Because the use environment and purpose are completely different, the operating procedures are also completely different, that is, the same crane with different lifting weights cannot use a safety operating procedure and must be dedicated to special vehicles. The operating rules of special equipment are very strict, and the national quality supervision and management departments attach great importance to it, so we must not be careless, otherwise the equipment will be sealed.
6. As I have worked in an ironmaking factory (Fushun Xinlong Si-Mg-Cr Co., Ltd.) for several years, I know this kind of crown block better. It is targeted when formulating operating procedures.
Responsibilities of the main person in charge
1. The user unit is the main responsible person for the safety of special equipment, and the main responsible person of the user unit is the first responsible person for the safety of special equipment, and is fully responsible for the safety of special equipment of the unit. Clear, open and documented safety objectives should be formulated, necessary resources should be provided for achieving the safety objectives, and the realization of the objectives should be evaluated.
2. Accept and cooperate with the safety supervision and inspection of the safety supervision department of special equipment, take timely measures to correct or eliminate potential safety hazards found, strictly implement the requirements of laws, regulations, standards and relevant provisions of the state and Hunan Province on the safety management of special equipment, set up management institutions and personnel responsible for the safety of special equipment, and be responsible for the investment in the safety production of special equipment, which will be included in the annual funding plan of the enterprise and effectively implemented.