In addition, its 5S should be done well.
Then there is the preparation for entertaining guests. Factory inspectors in some companies have some bad habits, that is, accepting red envelopes, which is generally 500~ 1000. Hehe, it depends on his performance at that time. Some people not only take it, but also eat and drink, hehe. It depends.
Question 2: What is a factory inspector and what do factory inspectors usually do? Generally, it is similar to the clothing industry, and this type of work is only available in labor-intensive enterprises doing foreign trade. Generally speaking, it is a comprehensive work such as production management, logistics, personnel, salary and safety. In China, it is to document these things to make them conform to the legal provisions, or make them look temporary to make them conform to customer requirements so as to achieve the purpose of obtaining orders. (Why do you do this in one word: profit. For example: overtime, low overtime pay, child labor, safety problems, workshop cleaning problems, occupational disease prevention and control, etc. )
Question 3: What does factory inspection mean? Factory inspection is also called factory audit, commonly known as factory inspection, which is simply understood as factory inspection. Generally divided into human rights inspection (social responsibility inspection), quality inspection (quality and technology inspection), anti-terrorism inspection (supply chain security inspection) and so on.
Human rights inspection
It mainly investigates human rights, the protection and responsibility of factories to workers, and the responsibility to the environment, including prohibiting the use of child labor, opposing discrimination and oppression of workers, prohibiting the use of prison workers, workers' freedom of association, wage payment, working hours, etc. , must comply with the requirements of the International Labour Organization and China's labor laws and regulations. Health, safety, fire control and other requirements, to ensure that the working environment of workers is conducive to escape, not harmful to health. In terms of environment, it is mainly to check whether the relevant documents are handled according to the legal requirements and whether the environmental protection facilities are operating normally.
quality test
Every customer's requirements are different. Based on ISO900 1 quality management system, higher requirements are added, such as raw material inspection, process inspection, finished product inspection and risk assessment. Production report, effective management of all kinds of goods, on-site 5S management and so on.
Anti-terrorism inspection
At present, it is not very popular, and most of them are aimed at the requirements of American customers, such as personnel safety, data safety, goods production, packaging and loading and unloading safety, so as to prevent inflammable and explosive dangerous goods from entering the packaged finished products and being directly transported to the port, posing potential threats and security risks to society and the public. The main purpose of anti-terrorism factory inspection is to ensure the transportation and use safety of export goods through a set of safety control procedures of the factory itself.
Question 4: Is there a future for today's factory inspection? Auditors are different from salespeople. The audit is mainly to go to the factory for on-the-spot investigation and take photos. And then come back to make a report. The main job is to travel and inspect the factory. Some people will find it hard to run outside, some people like it, and everyone is different. The development prospect depends on the individual. The auditor's background is generally not too high, including junior high school, senior high school, junior college and undergraduate course. People have different qualities. What do you think of the prospects of junior high school students compared with undergraduate courses? Therefore, the prospect is not determined by the position, but by people, and this is not a high position. In terms of welfare, you can refer to the prospect. It is not a top-level good job, but the level is average. However, when you visit the factory outside, the factory will be more respectful and the work mentality may be more comfortable. thank you
Question 5: What is factory inspection and how to solve it? Factory inspection is also called factory audit, commonly known as factory inspection, which is simply understood as factory inspection. Generally divided into human rights inspection (social responsibility inspection), quality inspection (quality and technology inspection), anti-terrorism inspection (supply chain security inspection) and so on. Many customers hope that the supplier's management system in quality, social responsibility (human rights), anti-terrorism and other aspects will meet certain requirements, so they will check the factory situation or entrust a third-party notary office before placing an order. Only by confirming that there are no major and serious problems in the factory can the factory be included in the list of qualified suppliers, and then they will place orders and cooperate for a long time.
How to deal with factory inspection;
First, the factory itself should pay attention to it. No matter what you do, you can't do without a positive and serious attitude, what's more, preparing for factory inspection is a complicated and tedious work, which requires caution and no mistakes are allowed. A little carelessness may lead to unqualified factory inspection. General factories will receive inspection notices from foreign trade companies and foreign customers. Foreign customers have no problem, and the factory will attract enough attention. However, many factories don't pay attention to it, but they don't know that once the factory is unqualified, it may cause huge losses, including not receiving foreign orders and terminating cooperation with foreign trade companies. Therefore, whether you get the factory inspection notice directly from customers or foreign trade companies,
Second, time is hasty and preparation is insufficient. In the face of factory inspection, in order not to affect the usual production and complete the production task, many factories adopt the policy of cramming temporarily. They usually don't pay attention to it, but at the end of the day, they get anxious and forget it. It's basically not easy. The same is true of my previous clients. Factory inspection, a heavy workload, is a team task, not to say that one person can complete it. Personnel data in the factory, including employee attendance, wages, working hours, etc., need a long time to plan and coordinate, and must be foolproof. You should know that once there is a problem with salary attendance and personnel data, it will lead to a total loss. In addition, the EHS facilities of the factory need to be improved, the documents need to be planned and the employees need to be trained, so it is difficult to pass without enough time to prepare before the factory inspection.
Third, there are not enough people to deal with factory inspections. Many times, the factory director and employees are very active in responding to the factory inspection, but they still fail to pass the factory inspection. Why? This is probably caused by a shortage of staff. The data of the whole factory is compiled by several people, which leads to too much workload for everyone, and it is inevitable that mistakes will be made when the workload is large. Moreover, with such a large workload, it is less likely to find problems by checking with several people. If there is a fatal error, the direct audit will not pass. Therefore, factory inspection should be a general mobilization of the whole factory, and should not be a matter of a few people or leaders.
Fourth, salary attendance is the success or failure of factory inspection, so we should pay enough attention to it. After doing a good job, you should carry out certification inspection, including salary, vacation salary, annual leave and so on.
Fifth, after all the documents and salary attendance are completed, tidy up and get familiar with the information. Don't wait for the auditor to ask for this document on the audit day. He can't find it, and neither can he. Then he will be in a hurry.
Sixth, don't bet on auditors or consultants. Doing your job well is the last word.
Question 6: What is factory inspection? The content of factory inspection is also called factory audit, commonly known as factory inspection, which is simply understood as factory inspection. Generally divided into human rights inspection (social responsibility inspection), quality inspection (quality and technology inspection), anti-terrorism inspection (supply chain security inspection) and so on. Many customers hope that the supplier's management system in quality, social responsibility (human rights), anti-terrorism and other aspects will meet certain requirements, so they will check the factory situation or entrust a third-party notary office before placing an order. Only by confirming that there are no major and serious problems in the factory can the factory be included in the list of qualified suppliers, and then they will place orders and cooperate for a long time.
That is, the factory is audited or evaluated according to certain standards. The activity of "factory inspection" has been popularized in China's export enterprises and accepted by multinational corporations and intermediaries.
Human rights inspection
It mainly investigates human rights, the protection and responsibility of factories to workers, and the responsibility to the environment, including prohibiting the use of child labor, opposing discrimination and oppression of workers, prohibiting the use of prison workers, workers' freedom of association, wage payment, working hours, etc. , must comply with the requirements of the International Labour Organization and China's labor laws and regulations. Health, safety, fire control and other requirements, to ensure that the working environment of workers is conducive to escape, not harmful to health. In terms of environment, it is mainly to check whether the relevant documents are handled according to the legal requirements and whether the environmental protection facilities are operating normally.
quality test
Every customer's requirements are different. Based on ISO900 1 quality management system, higher requirements are added, such as raw material inspection, process inspection, finished product inspection and risk assessment. Production report, effective management of all kinds of goods, on-site 5S management and so on.
Anti-terrorism inspection
At present, it is not very popular, and most of them are aimed at the requirements of American customers, such as personnel safety, data safety, goods production, packaging and loading and unloading safety, so as to prevent inflammable and explosive dangerous goods from entering the packaged finished products and being directly transported to the port, posing potential threats and security risks to society and the public. The main purpose of anti-terrorism factory inspection is to ensure the transportation and use safety of export goods through a set of safety control procedures of the factory itself.
baike.baidu/...qlNvlC
Question 7: Ask some professionals who are factory inspectors. What is this industry like? What do you mainly do? How long does it take to do a factory inspection? As a factory inspector, in addition to the corresponding professional knowledge, more is to grasp the world and scale. The work content is different according to the actual situation, and the length of factory inspection time will be different.
Question 8: What is factory inspection audit? What does the factory inspection audit do? The simple understanding of factory inspection audit is to inspect the factory. The customer will ask his suppliers to meet certain requirements in terms of quality, social responsibility (human rights) and anti-terrorism, and will check the condition of the factory before placing an order. Only when there are no major and serious problems will the factory place an order.
Factory inspection and audit is mainly to audit or evaluate the factory according to certain standards. Generally, it can be divided into human rights factory inspection, quality factory inspection and anti-terrorism factory inspection. Factory inspection activities of enterprises have been popularized in China's export enterprises, and accepting factory inspection by multinational corporations and intermediaries has almost become a necessary condition for China's export production enterprises, especially labor-intensive enterprises such as textiles and clothing, toys, daily necessities, electronics and machinery.
Factory inspection consulting organization: comprehensive factory inspection organization and IQSA.
Factory inspection and audit institutions: ITS, BV, SGS…… ... ...
Question 9: Will it be hard for girls to do factory inspection? It's really troublesome to inspect the factory. No matter who did it, it's even harder if it's just a clerk.
Question 10: How do factory inspectors get started 1? Factory inspection is divided into social responsibility inspection, anti-terrorism inspection and environmental audit.
2. Look for Wal-Mart's audit list, which is available in all three factories, and find out the materials needed on the list one by one and the purpose of asking for these materials.
When you encounter problems in practice and keep solving them, you will gradually become proficient.
Audit list Baidu search, I hope to help you, thank you!