2. In the system for exporting waste gas, residential areas should not be affected, including noise pollution and waste gas impact;
3, do not interfere with the exhaust measures are:
1) The exhaust system with "organized exhaust" outlet must be installed to discharge the exhaust gas;
2) The outlet position of "organized discharge" should be placed more than 2 meters above the roof of the building;
3) The installation of axial flow fan in spray booth should adopt low-noise explosion-proof fan and install flexible joint conduit at the outlet to ensure the safe implementation of noise reduction report;
4) The installation position of the air outlet should be in the downwind direction, away from sensitive buildings, so as to effectively prevent disturbing people.
Is the filtration of paint mist at the exhaust port of spray booth an odor problem or a dust problem?
DIY？
Buy an iron drum with an opening on it (sold by the recycling station) and fill it with half water. The intake pipe should not be too deep (the smaller the fan, the less water will enter), and the opening above should be sealed with filter cotton. After that, it is necessary to replenish water and remove slag frequently.
How to install a spray booth without disturbing people: try to install it in residential areas and places with relatively few people.
Second, it is relatively simple to treat the discharged paint mist with activated carbon now, and it will have less influence on others if it is discharged into the sewer.
Kindness makes money,
How to minimize air outlet pollution by installing a spray booth next to the community? No spray booth can be installed in the community.
Can a water curtain be installed at the car outlet of the spray booth? How much does it cost to install it? You can't install a water curtain at the air outlet. The water curtain should be installed opposite the fan. If installed, it generally depends on the actual use area. Of course, if the quantity is large, the price will be cheaper. :sfgood。 /ProShow。 Asp？ ID=206
The installation master of the paint booth knows how to install and manufacture the paint booth in the paint booth. Generally, the installation master installs the equipment according to the design scheme of the project engineer. For example, the installation masters of painting rooms in some big companies are generally more experienced. For example, Yuemei Electromechanical, Xinger Painting and Lihai Painting all have their own design teams and installation masters.
Why doesn't the blower in the painting room exhaust air when working? First, check whether the blower is rotating forward or backward. If it rotates forward, check for air leakage. It should be fine if it is sealed.
Should the electric oven be equipped with an air outlet? It is better to have an air outlet. If you don't install it, you need more space to facilitate heat dissipation.
The problem of installing a yuba is the problem of the vent. There's already an exhaust hole. Yuba vent is not needed. Generally, it is a lateral line, so as long as it is the height of the Yuba itself, the exhaust on the Yuba is an auxiliary function and still useful.
How to choose a spray booth? Hello, car painting room and furniture painting room. There are standard and non-standard spray booths, depending on which one you use, as well as the quality and price you want to use. At present, there are many spray booths in Yancheng, Jiangsu, Guangzhou and Shandong. Yancheng is the most expensive, Shandong is the cheapest and Zhong Da is of good quality. The prices in Guangzhou and Yancheng are not worse than those in Zhong Da, but they are cheaper than those in Zhong Da. Let me recommend some to you if necessary. I know almost all of this industry. I hope I can help you.