Headlight control module is located on the lever on the left side of the steering wheel, and there are knobs and keys on the left side of the steering wheel. Place the new bulb in the reflector and align it with the fixing groove of the bulb. There are several fixing grooves on the lamp holder. When installing, reverse the operation according to the steps of taking out the old bulb, hold the steel wire circlip and insert the bulb into the reflector, aim at the installation position, and then loosen the circlip to fix the bulb.
Headlamp replacement (removal and installation) steps are as follows:
1. Unplug the light bulb. When unplugging the bulb power socket, the strength should be moderate to avoid loosening the socket connection or damaging the bulb plug;
2. After unplugging the power plug, remove the waterproof cover behind the light bulb. Most of the waterproof covers of headlights are made of soft rubber, and some models are equipped with waterproof covers made of soft plastic. As long as you apply a little force, you can see the waterproof cover fall off;
3. Remove the bulb from the reflector. When taking out the light bulb, you need to pinch the steel wire clasp on both sides with your fingers, and then pull out the light bulb after releasing it;
4. Put the new bulb into the reflector and align it with the fixing groove of the bulb. There are several fixing grooves on the lamp holder. When installing, reverse the operation according to the steps of taking out the old bulb: hold the steel wire clamp spring and insert the bulb into the reflector, aim at the installation position, and then loosen the clamp spring to fix the bulb;
5. Cover the waterproof cover to ensure that the edge of the waterproof cover is completely consistent with the fixed position. Finally, connect the headlight power socket and replace the headlight.
Wang Junhao, certified expert, certified automobile master, years of working experience in the industry+ask him the position of the left side of the steering wheel.