The voltage is too high to start because the manufacturer has set up voltage protection! This is a normal phenomenon!
Treatment of overheating of XAHS365 screw air compressor. XAHS365 diesel engine produced by Atlas Capco Company in Sweden drives a single-stage twin-screw high-pressure large-displacement air compressor, which uses various sensors and automatic control valves to monitor the operation, with simple operation and high degree of automation.
When a certain part fails, it will be automatically fed back to the diesel engine flameout solenoid valve to stop the diesel engine and protect the safety of the whole machine. The fault with high probability in operation is that the air compressor stops due to high temperature.
The maximum exhaust temperature of this machine is set to 120℃. If it exceeds this temperature, it will stop automatically, and the temperature warning light will start flashing to give an alarm.
Extended data:
The main reasons for the voltage drop when the air compressor is started are that the power cord is thin, the power cord is long and there are too many connections (connectors).
1. When the air compressor starts, the voltage drops, which should be due to the large internal resistance of the power supply, such as thin power supply line, long power supply line, too many wires (connectors) and large contact resistance.
2. The voltage drop during air conditioning startup is also related to the larger startup current. The greater the power, the greater the starting current and the greater the voltage drop of the power supply.
Baidu encyclopedia-screw air compressor