How to charge the driving charger?
Firstly, the positive level of the charger receives the positive level of the battery, and the negative level of the charger receives the negative level of the battery. Then, press and hold the charge button to start charging. When the car has no electricity to start the car engine, it is of course necessary to charge the battery, and the application of battery charger can be regarded as a relatively fast way. But for some friends who live in small houses, it is very likely that they have not mastered the use of battery chargers well. So, how to use the car battery charger? Today, we will tell you how to operate the battery charger. First, the positive level of the charger is received by the positive level of the battery and the negative level of the charger is received by the negative level of the battery. Then, press and hold the charge button to start charging. But we don't have to wait for it to be fully charged with battery power, as long as there is enough power to run the car engine. Why do you say that? It should be understood that after the automobile engine is started, it will be driven according to PiDai, and the transmitted electricity will be solved by transformer and voltage regulator, and the automobile battery will be charged immediately. It only takes an hour or two for everything to run normally, and the battery power can be restored. It is important to pay special attention not to overcharge the rechargeable battery frequently. Although the current generated by the charger is not very large, because the electrolyte of the lithium battery is in a boiling state for a long time, not only the tiny particles on the surface of the active material are very easy to fall off, but also the air oxidation of the grid will occur in serious cases, resulting in the loose separation of the active material from the grid. Therefore, you must play an extremely spiritual role when charging.