Most indicators fall into four categories:
The red indicator light indicates a warning, and it may be dangerous to drive again at this time.
(2) The light yellow indicator light is only early warning information, which can be solved as soon as possible.
(3) The dark blue indicator light lets car buyers pay attention to whether it has a matching effect on other cars.
(4) Emerald indicator is a multifunctional lighting effect, such as width indicator, direction indicator and its approach indicator.
The following is a detailed description of the new Mercedes-Benz GLB 180 indicator light (serial number matching diagram).
4. Clean the level gauge
The flashing indicator light indicates that it is time to fill the window or headlight cleaning equipment with cleaning liquid.
5, brake system friction plate
The friction plate is thin and soft and will not meet the requirements of the brake pedal. Please remove it immediately and replace it. Friction plates on the same shaft should be removed and replaced at the same time to avoid the direction deviation of the braking system.
19, steering lock system software
There is something wrong with the steering system of the car, and the reversing steering wheel will not turn. There is no need to drive a car at this time, which will lead to danger.
2 1, tire inflation working pressure video monitoring system
If the tire pressure standard is too low or too high, the dashboard in the car will display the position of the tire, or it may be that the information content is stored again after the tire is removed and replaced.
3 1, electric pedal parking brake
Monitor whether the brake is in place in time, and the indicator light goes out after the brake is released. When the indicator light flashes continuously, it means that the brake _ is in normal working position, which is likely to cause the danger of slipping.
32, battery power consumption
The battery is insufficient, but sometimes it can be charged according to the driving time, and the battery should be repaired after a period of time.
48, refrigeration system
The refrigerant may be insufficient, or the fan may not work.
49. Anti-lock braking system
When the fault light is on, it means that the anti-lock braking function is invalid when braking the system. In addition, if there is a common fault in the EDS of the electronic differential system, it will also cause the fault light to light up. If the brake pad is crushed in an emergency, it will lead to dangerous uncontrollable situations such as drift and side slip.
53. Total gasoline and diesel oil
When the fault light is on, it means that there is little remaining oil. If gasoline and diesel flash for a long time, it indicates that there may be common faults in the gasoline and diesel system.
57. Engine oil quantity
The oil pressure is too low or the remaining oil quantity is insufficient.
60, motor control driving smooth system software (ESP)
When everything is running normally, it will flash, and when it stays on, it means that there is a common fault. In addition, the effect of turning off ESP will also flash. At this time, the actual operation is limited and it is easy to cause risks such as drift.
62, organic waste gas video monitoring system
It may be that the engine knock leads to insufficient ignition, which can not meet the environmental protection standards in China.
Million car purchase subsidy