How to set the network set-top box after it is restored to factory settings?
First, connect the network cable to the network cable interface of the set-top box. If the TV supports HDMI high-definition access, the set-top box can be connected to the TV through the HDMI interface; If it is an old TV, you need to connect the set-top box to the TV through the AV interface.
If your mobile set-top box is restored to factory settings, it needs to be reset and configured. The following are some common steps: Connect TV and set-top box: Connect set-top box and TV through HDMI or AV cable. Power connection: connect the set-top box to the power socket and ensure that the set-top box is powered on.
The steps to restore the factory settings of the mobile TV set-top box are as follows: turn on the power switch between the set-top box and the TV, and switch to the set-top box connection page with the remote controller. Then click "Menu" on the remote control of the set-top box to enter the system settings. Go to the next submenu "Settings" page and select "System".
Connect the set-top box and turn it on. After starting the machine, wait for the "data import" to complete, and press the "Settings" button on the remote control when the next screen is displayed.
There are three ways to restore the factory settings of set-top boxes: restore the factory settings in the system settings: take Taijie as an example: just find this option in the settings, and be careful not to power off during the recovery process. Recovery, double clearing: recovery is recovery.
Unicom set-top box to restore factory settings.
Unicom set-top box to restore factory settings.
1, Unicom's network set-top box cannot be repaired after it is restored to factory settings. Introduction: Factory settings: it is to restore the default state when leaving the factory, such as startup interface, standby mode, operation shortcut keys, timing reminder and other functions, and to clear the saved parameter settings.
2. The steps are as follows: Press the "Settings" button of the set-top box remote control to enter the settings page. Move the cursor to More in the lower right corner of the screen, and then click OK. Move the cursor to Advanced Settings, and then click OK. Enter: 100 10 in the password box that pops up, and click OK.
3. Hello, if there is a broadband failure, I suggest you log in to China Unicom APP→ click "Service" at the bottom → click "Broadband Zone" at the top → click "Troubleshooting", fill in your information and submit the failure problem truthfully. If you have any questions, please click /qA5yV for consultation.
4. Unicom's network set-top box has been restored to factory settings, which cannot be restored, but it can be reset. Take the setting of Unicom ZTE set-top box as an example: firstly, connect the network cable to the network cable interface of the set-top box.
What should I do if the TV set-top box is restored to factory settings and I can't connect to the TV?
What should I do if the TV set-top box is restored to factory settings and I can't connect to the TV?
1, directly in the relevant window, select Settings to jump. If there are no problems, continue to select networks and connections. Next, click on the wireless network to enter. At this time, click the required object to connect according to the actual situation. In this way, you will get the result of the icon, and you can achieve your goal.
2. Tune the TV to relevant channels, such as AV or HDMI. Turn on the set-top box and you can watch it normally.
3. After the set-top box is restored to factory settings, some settings such as image resolution and sound need to be reset, but the most important thing is to set up a good network connection, choose your network name, and then enter the correct password. After setting up, you can connect to the TV.
4. Hello, the set-top box cannot be set after it has been restored to factory settings. You can ask the telecom maintenance personnel to help you solve it. Anhui Telecom WeChat official account is at your service.
5. After the TV is restored to factory settings, the network connection cannot be connected: there is something wrong with the TV's network settings; You can enter the network setting interface and try to reset the WiFi signal connected at home.
What if I accidentally press the set-top box to restore the factory settings?
What if I accidentally press the set-top box to restore the factory settings?
At this time, the box will enter the factory recovery state and automatically restore the factory settings. If you accidentally press the set-top box to restore the factory settings, you can search for programs in the following ways. Cable set-top box, turn on the switch of set-top box and TV, and wait for the set-top box to start.
All states have been restored to the default state and can be reset once: factory settings mean that the box has been restored to the default state when it leaves the factory, such as startup interface, standby mode, shortcut keys and other functions, but the stored data will not be deleted.
After restoring the factory settings, the software you installed is gone, and now you need to reinstall the original software. Some need to be installed through third-party software, such as Dangbei Market and Ant Market. If there is no set-top box in these markets, you can download the Android version from your computer.