Forced cooling and forced heating is a function of the Yangtze River variable frequency air conditioner, but it is not on the fixed frequency. Its function is to turn on the strong mode of air conditioning when the room temperature is high, and achieve the cooling effect quickly. When the indoor temperature is low in winter, the room temperature can rise rapidly, that is to say, the power of the air conditioner will exceed the rated power, the frequency conversion compressor will operate very quickly, and the room temperature will change very quickly. After reaching a certain temperature, the air conditioner will automatically switch to the normal mode. ?
Extended data
Turning on the turbo function with spaces is not necessarily more power-consuming. Although turning on the forced cooling and forced heating mode of air conditioner will increase the power of air conditioner, it will also reduce the running time of air conditioner.
Whether the forced cooling and heating mode is turned on or not, the air conditioner will stop when it reaches the set temperature, so whether the air conditioner consumes electricity has little to do with whether the strong mode is turned on or not. What matters is the energy efficiency ratio of the air conditioner in the strong mode. Energy efficiency ratio is the most intuitive method to measure whether air conditioners consume electricity.
Present situation and solution of abnormal protection for turbine of Yangzi air conditioner;
1, is there a reflector, such as a mirror or TV, opposite the indoor unit of the air conditioner?
2. Now it is whether the remote controller is in good condition (whether the buttons are adhered cleanly). Don't put other remote controllers together with the indoor air conditioner.
3. Will the air conditioner turn on by itself when it is turned off and turned on again? If so, it is that the manual switch of the air conditioner is automatically turned on, and it will be fine if it is turned on.
4. The cooling net of the external machine is dirty, which can't dissipate heat well, leading to the self-protection shutdown of the compressor.
5. It may be that the voltage is unstable or the temperature sensor is aging. Check the voltage or sensor.