First, the sliding doors and windows can't be opened, how to maintain them.
1. There is a screw at the top of the door of the rail-hanging sliding door to fix the slide rail. Remove the screws on both sides of the door, raise the door as high as possible and fix it. Use a screwdriver to slide out of the slide rail in the opposite direction of the slide rail. When the two pulleys are separated, the door will automatically fall. Necessary accessories for sliding doors and windows: pulleys, a few cents cheaper, a few dollars more expensive, and even the best insulating glass broken bridge window is six or seven dollars. In addition, the service life of pulleys is limited, and the damage of door and window fittings is a common phenomenon among many owners.
2. There is a screw at the top of the door of the rail-hanging sliding door to fix the slide rail. Remove the screws on both sides of the door, try to lift the door and fix it, and use a screwdriver to slide the slide rail out in the opposite direction of the track. When the two pulleys are separated, the door will automatically fall. Necessary accessories for sliding doors and windows: pulleys, a few cents cheaper, a few dollars more expensive, and even the best insulating glass broken bridge window is six or seven dollars. In addition, the service life of pulleys is limited, and the damage of door and window fittings is a common phenomenon among many owners.
If you can't solve it, you'd better find a master of after-sales service to help you solve this problem, but don't repair a door yourself to save maintenance costs! When installing sliding doors with hanging rails, it should be noted that the width of the two doors must be guaranteed. In this case, the sliding door with hanging rail can still be considered when the front and rear space is relatively small. At the same time, we should pay attention to whether the sliding door will produce relatively loud noise when it is installed. Therefore, when choosing a hanging rod, you must choose a better quality, so as not to bring inconvenience to future use.
Second, the common problems of door and window maintenance
In addition, there is air leakage caused by loose hardware locking. If the hardware installation is not very qualified, and then the locking is not strict due to some irregular operations after a period of use, then the hardware must be adjusted to achieve a good locking effect. On the other hand, if it is serious, we should consider replacing this hardware accessory. Of course, this situation is more serious. If you have experience in door and window maintenance, you can consider replacing it, but you can't force it. It is best to let professionals replace it professionally, and it is also for our own safety. After all, it is also dangerous to install this, so as to avoid hurting yourself because of the wrong installation.
Another is the possibility of air leakage caused by deformation of doors, windows and sashes. According to relevant sources, because the plastic material will be flexible, the longer the single bar, the greater the deformation, so the window sash is likely to be deformed. Deformation will naturally cause air leakage to us. If this happens, if it is not serious, we can correct it by installing the middle lock. Or if it is serious, consider the need to change the window sash. When it comes to door and window maintenance, we should not cram for the Buddha's feet temporarily, but also check it every day to avoid hurting us in an emergency.
From the above, it can be seen that improper use, untimely maintenance or long use time will lead to the damage of doors and windows, not only because of the lack of aesthetic appreciation value in appearance, but also because of its unsatisfactory function or safety guarantee. Therefore, Bian Xiao suggested that you can learn the professional maintenance methods mentioned above in advance, and if necessary, you can analyze the door and window failures or ask professional maintenance personnel for help.