How to set the router's 5G wifi signal on the mobile phone?
Pay attention to this question:
Only dual-band wireless routers support 5G wifi. The so-called dual-band wireless router means that the router can provide both 2.4G wifi signal and 5G wifi signal.
If your router is single-frequency, it only supports 2.4G wireless wifi；; Then, in the router, there is no related setting option for 5G wifi.
Therefore, if you want to use the 5G wifi signal, the wireless router at home must be a dual-band wireless router.
1. Check the router settings URL.
(1), the setting web address of the router, usually called: management page address, login address, login IP address, etc.
(2) Different routers may set different websites; So you need to know the information of your router's setup website before you can log in to your router's setup page.
(3) The setting URL of the router can be found on the sticker at the bottom of this router.
As shown in the figure below, the router I used to demonstrate is set in tplogin.cn.
View the settings URL of the router.
2. Log in to the settings page.
Open a browser in the computer, enter: router setup URL in the browser, open the setup page, and follow the prompts on the page.
I once demonstrated the router setting website: tplogin.cn; So enter: tplogin.cn- > in the browser and then enter the administrator password/login password, and you can log in to the router settings page.
Log in to the router settings page.
Possible problems:
(1). Enter in the computer browser: After the router sets the URL, the login page cannot be opened. For the solution to this problem, please read the following article:
What if the router settings page can't be opened?
(2) After opening the router login interface, I don't know/forget the administrator password and can't log in to the router settings page. For the solution to this problem, please read the article:
What if the router administrator forgets the password?
3. Set up 5G wifi
On the router settings page, find the option of "Wireless Settings" or "WiFi Settings", and you can see the settings page of 5G wifi. As shown in the figure below, you can set the name and password of 5G wifi.
Set up the router 5G wifi.
Tips:
(1) and 5G wifi names are not recommended to set Chinese characters; Because some mobile phones and computers don't support wifi signals with Chinese names.
(2) The password of 2)5G wifi is suggested to be a combination of uppercase letters+lowercase letters+numbers+coincidence, and the wireless password should be longer than 8 digits. This can best ensure the security of the wireless network and will not crack the wifi password.
Possible problems:
After modifying the wifi password, wireless devices such as mobile phones and laptops cannot connect to the original 5G wifi signal.
At this time, you need to delete the wifi records saved in your mobile phone and computer, and then reconnect this 5G wifi signal, and you can connect.
Extension: Tengda Router External Network Settings
First, correctly connect the hardware: the telephone line enters the cat, the cat connects to the router WAN, and the router LAN interface connects to the computer.
Second, find the physical address of your network card, enter the system's MSDOS mode (Start-Program-Accessories -C:/ prompt), and issue the ipconfig/all command to find the MAC address of the computer network card. For example: 00-50-8d-d1-71-a7. Write it down.
Third, the correct routing automatic dialing settings
1. Set the local connection IP of the computer to be obtained automatically.
2. Open a webpage and enter the router address (192.168.1.1or192.168.0.1) in the address bar to log in.
3. Enter the user name and password as required (which can be found on the router).
4. In the system tool, restore the factory settings, and then set up automatic routing dialing according to the setup wizard. When online mode needs to be selected, select PPPOE(ADSL Virtual Dialing), enter broadband account and password, complete the setting, facilitate the setting, exit the route and restart the route.
4. Clone MAC address to enter the router setup page, click the "Network Parameters" button on the left side of the window, and select the "Clone MAC address" button. The MAC address cloning window will appear. Fill in the "MAC address" in the "MAC address of the currently managed PC" window above. Click the "Clone MAC Address" button again, and the MAC address will be filled in the "MAC Address" window. Save the settings. Exit the routing settings and restart the routing, which should be enough. Note that after using the router, you can no longer dial with broadband connection. The router will dial automatically and just surf the Internet directly.
Basic introduction
Tengda, the full name of Shenzhen Jixiang Tengda Technology Co., Ltd., is a leading supplier of network communication products from China to the world, and is committed to connecting the network to every corner of the world in the most convenient way to enrich people's lives. The company provides users with humanized innovative products covering wireless network, wired network and regional network, wins the trust of customers with cutting-edge scientific research technology, excellent product quality and dedicated service consciousness, and builds a global high-quality brand.
Tengda's market is all over the world. In China, the company has set up nine branches and more than a dozen offices. Internationally, the company has set up overseas offices in Hong Kong, Singapore, India, Vietnam and Russia, established cooperative relations with top agents in more than 30 countries in North America, South America and Europe, and its marketing network has covered the whole world.
Tengda's scientific research technology has been at the forefront of the industry, leading the technical direction of network products. The company has a group of outstanding and innovative high-tech talents, and is committed to developing "Tengda" series network products with independent intellectual property rights. Products include wireless series, gigabit cable series and 100 megabit cable series, covering wireless AP, routers, switches, network cards, modems, optical fiber transceivers and other categories. The products have passed the national 3C, American FCC and European CE certification.
Tengda regards product quality as the dignity of the company, adheres to the principle of "strictness, delicacy, truthfulness, constancy and pursuit of Excellence", strictly controls the quality according to ISO900 1:2000: 2000 standard, and is equipped with a perfect after-sales technical support system, which makes the customer satisfaction reach 98% and enjoys a good reputation among the industry and users.
"Self-improvement, innovation, honesty and trustworthiness" is Tengda's enterprise spirit, and "value, Excellence and professionalism" is Tengda's service concept. Tengda people will take this as their belief and realize the goal of a world-class high-tech enterprise with a highly responsible attitude towards society and users.