The double-wave beam guardrail plate is 4320mm long, 3 10mm wide, 85mm high and 3mm and 4 mm thick.
Cylinders: specifications φ 1 14, φ 140mm, 1.2m, 1.8m, 1.85m, 6544 as required. Theoretical weight: φ11415 kg/m, φ140 mm15.04 kg/m/m.
The most commonly used model of corrugated beam guardrail: Gr-A-4E. The dosage of Gr-A-4E guardrail assembly per kloc-0/000 m is 250 corrugated plates. There are 250 columns with a spacing of 4m. 250 caps. 250 anti-blocking blocks (or brackets) and 2 ends. Set of bolts m16 *170,250. M 16 * 42250 sets. M16 * 35,200 sets.
Stop 196* 178*200mm. The thickness is 3/4/4.25/4.5mm. ..
Column? The cap thickness is 2/3mm, the hole spacing is 100/ 150mm, and the diameter is1140mm.
Snail? Pin M 16* 170? /? M 16* 150？ /? M 16*50？ /? M 16*42？ /? M 16*35
Joe? The frame is 300mm long, 70mm wide and 4mm/4.5mm thick.
Surface treatment includes hot galvanizing, cold galvanizing+plastic spraying and hot galvanizing+plastic spraying.
Corrugated beam guardrail models: GR-A-4E, Gr-Am-4E, Gr-Am-2E, Gr-A-2E, Gr-SB-2C, Gr-A-2B 1, Gr-SB-2C, Gr-A-4C, Gr-.
Barrier function of corrugated beam: good impact resistance, low cost, long service life, safety and environmental protection; Good corrosion resistance, anti-aging, beautiful and generous; Installation is simple and quick.
Uses: expressway anti-collision guardrail, general road (provincial road, county road, township road, etc.) anti-collision guardrail. ), the protection and isolation of factories and construction sites.
In the middle is a green picture of the corrugated beam guardrail commonly used in Anhui.