1. Which company is good for Zhuji factory decoration?
1, Zhuji Runze Decoration Engineering Co., Ltd.
Zhuji Runze Decoration Engineering Co., Ltd. was established on 20 17, with a development history of only about two years. However, we have been adhering to the concept of "quality first, reputation first", undertaking various large and medium-sized decoration projects, and insisting on creating perfect space for our customers with perfect service and high-quality engineering quality.
2 Zhuji Chang Hao Decoration Co., Ltd.
Zhuji Chang Hao Decoration Co., Ltd. is a decoration design company specializing in the design and construction of houses, villas, hotels, shops, office buildings and factories. Since its establishment, it has been well received by the society and customers with its vigorous vitality and humanized modern service concept.
3. Zhuji Fengzhihuang Decoration Company
Zhuji Wind Emperor Decoration Company is a professional decoration company integrating interior design, budget and construction. Engaged in interior design and construction for many years, with rich decoration experience. The company pays attention to the environmental protection of construction technology and methods and the use of materials, and is widely favored by customers with innovative design and reasonable quotation.
2. How much is the decoration of Zhuji factory?
Usually, the person in charge of the factory will choose all-inclusive decoration, that is, all the projects will be contracted to a special decoration company. The resulting expenses are mainly affected by the decoration level. The higher the grade, the higher the decoration cost. If it is a simple decoration, then the decoration of Zhuji factory is probably 300-Yiping, 400 yuan; If it is ordinary decoration, then Zhuji factory decoration is probably 500-Yiping, 600 yuan; If it is a mid-range decoration, then Zhuji factory decoration is probably 800-900 yuan Yiping; If it is decoration, then the decoration of Zhuji Workshop is probably 1300- 1400 yuan.
(Note: The above prices are all from the Internet for reference only)
Three, Zhuji factory decoration acceptance criteria
1, circuit acceptance standard
(1) Before construction, electricians should be familiar with the circuit construction drawings or the requirements of the owner to ensure that all electrical appliances, switches, televisions and network sockets are located accurately.
(2) All purchased wires, cables, TV cables and network cables must meet the national testing standards to prevent unqualified products.
(3) The positioning of the switch and cassette must be symmetrical and consistent according to the requirements of factory building decoration.
(4) Each circuit loop is clear and reliable, and meets the requirements of electricity consumption. The live wire, neutral wire and electric wire should be separated or clearly marked.
(5) Slotting, laying pipelines, threading, checking and testing circuits. The wire joint shall be firm without looseness, tightly wrapped with double-layer insulating tape, and the joint shall have access.
(6) After the workshop acceptance, the person in charge shall sign and seal all trunking and cassette with cement mortar to ensure the normal construction of the bricklayer.
(7) Check whether all lamps and lanterns switches are flexible and whether the socket panel is loose to prevent conduction and leakage.
2, channel acceptance criteria
(1) The purchased aluminum-plastic pipes or PP-R pipes and fittings must meet the national testing standards to prevent inferior pipe fittings from entering the construction site and avoid hidden dangers.
(2) Waterway slotted pipe fittings and joints must be firm, and a closed water test should be conducted to check whether there is water seepage. If there is any problem, it should be solved immediately. Then do a second test.
(3) Determine the hot and cold water positions of all sanitary wares. The distance between cold and hot water outlet elbows must be on a horizontal line, and the distance between outlet elbows should not be less than 14.5cm, so as to facilitate the installation of triangle valve and faucet.
(4) No problem, please ask the factory director to sign for acceptance, all water pipes are sealed with cement mortar, and the site garbage is cleaned up.
3, the acceptance criteria of mud tile
(1) In order to ensure the construction progress, all materials for making display cabinets should be purchased before the bricklayer enters the site, so as not to delay the construction period.
(2) Masons must determine the engineering location of all demolition workshops and the perfection of paint workshops when entering the site.
(3) When tiling, find out the ground elevation according to the interior decoration design standard, calculate the number of vertical and horizontal tiles according to the wall area, and pop up the horizontal and vertical control lines.
(4) The corner painting must be in a straight line, and the lighting should be smooth.
(5) Before construction, the wall and floor tiles must be soaked in water for 2 hours to ensure that all floor drains are unblocked during construction.
(6) The wall and floor tiles should be firmly bonded with the grass-roots level, with smooth edges and corners, and there should be no problems such as warping and hollowing. The opening dimensions of all water outlets and sockets must meet the requirements and do not affect the overall beauty.
The above is about which Zhuji factory decoration company is good and how much Zhuji factory decoration costs. I hope it will help everyone!