All kinds of driver's license subjects need time to punch in:
The driver's license of C 1, C2 and C5, which is frequently tested, needs to be clocked in for 24 hours; While A 1 and B 1 are 20 hours; A2 is 22 hours; A3 is 33 hours; B2 is 32 hours.
However, the implementation of punching rules is not uniform throughout the country, and there are many places where punching is not needed. In addition, in some places, in addition to the required hours of punching, subjects are also required to practice a certain number of kilometers. Therefore, the specific details need to be consulted to apply for driving school or coach.
Subject 3 Punching Rules:
Punching in during school hours generally requires students to enter their fingerprints during practice, and then they need a coach to swipe their cards to prevent someone from cheating. Some areas have also begun to implement the operation of brushing tickets and punching cards, which is more convenient.
1, each class is 60 minutes, of which the effective teaching time shall not be less than 45 minutes.
2. Each student's daily classroom study time and practical operation study time shall not exceed 4 hours.
Subject three exam skills:
1. Prepare to check the appearance of the vehicle and adjust the seat and rearview mirror.
Students wait for the designated test vehicle in the designated test starting area, and voice prompts candidates to get ready to get on the bus. When they get on the bus for the first time, they have to authenticate the information first. After the certification is successful, students waiting for the test will go around the car for a week, observe the appearance and surrounding environment of the car, observe the traffic situation in the rear, and then open the door and get on the bus.
Fasten the seat belt, adjust the seat, and observe the rearview mirror, instrument panel, handbrake, gear position, lighting, etc.
2. Simulate the use of lights in the night scene and investigate the ability of using lights.
In the night lighting simulation exam, you should pay attention to not being able to keep up and get the password. After the voice is finished, the operation time is 5 seconds. If the operation is incorrect or overtime, you will fail the exam directly.
3. Observe before you start.
Observe the traffic situation in the rear, turn on the left turn signal, then whistle, step on the brake, step on the clutch, put in first gear and release the brake; After ensuring safety, release the brake, slowly release the clutch, and start with semi-linkage.
4. Change the lane turn signal, and then merge after observation.
Turn on the left turn signal, observe through the left and right rearview mirrors, and look back to the left to observe the traffic situation behind. If it is safe, control the speed to change lanes. Turn on the right turn signal, also observe the traffic behind the road and change lanes.