Chapter I General Provisions
Article 1 In order to strictly access the market and ensure the quality of engineering consulting, these Measures are formulated in accordance with the Administrative Licensing Law of People's Republic of China (PRC) and the Decision of the State Council Municipality on Setting Administrative Licensing for Administrative Examination and Approval Items that Need to Be Retained (Order No.412 of the State Council of the People's Republic of China).
Article 2 Engineering consultation is to follow the principles of independence, impartiality and science, and to provide government departments, project owners and other customers with intellectual services for social and economic construction and decision-making of engineering projects by using multidisciplinary knowledge and experience, modern science and technology and management methods, so as to improve economic and social benefits and realize sustainable development.
Article 3 Engineering consulting units refer to enterprises and institutions established in China to carry out engineering consulting business and have independent legal personality.
Article 4 The qualification of an engineering consulting unit is related to the investment benefit of the state and society, and it is a qualification licensing matter that requires special reputation and conditions. The National Development and Reform Commission (hereinafter referred to as the National Development and Reform Commission) is the competent administrative department for the qualification of engineering consulting units.
Article 5 The qualification of an engineering consulting unit includes three parts: qualification grade, consulting specialty and service scope.
Sixth engineering consulting units must obtain the "Engineering Consulting Qualification Certificate" issued by the National Development and Reform Commission in accordance with the law, and carry out the corresponding engineering consulting business with the "Engineering Consulting Qualification Certificate".
Chapter II Qualification Grade Standards for Engineering Consulting Units
Article 7 The qualification grades of engineering consulting units are divided into Grade A, Grade B and Grade C. Engineering consulting units at all levels shall conduct business according to the relevant provisions of the state and the requirements of the owners.
Article 8 A Grade A engineering consulting unit shall meet the following qualification standards:
(1) Basic conditions:
1. Engaged in engineering consulting business for not less than 5 years, applied for professional services with not less than 5 corresponding consulting achievements and no bad records;
2. The registered capital is not less than 5 million yuan (except institutions);
3. Have a fixed office space, with a per capita use area of not less than 6 square meters;
4. Preside over or participate in the formulation of relevant industry standards and technical specifications.
(2) Technical strength:
1. There are not less than 60 technicians engaged in engineering consulting business, of which 30% have senior professional titles, registered consulting engineers (investment) are not less than 15% of the total number of technicians, and full-time retired professional technicians are not more than 10% of the total number of technicians. The above personnel shall not practice in more than two engineering consulting units at the same time;
2. Each professional field shall be equipped with at least 5 corresponding professional technicians and at least 2 registered consulting engineers (investors);
3. The main technical person in charge shall have the qualification of registered consulting engineer (investment) and have been engaged in engineering consulting and related business for not less than 10 years.
(3) Technical level and equipment:
1. Master modern engineering technology and project management methods, with advanced technology and equipment, complete professional technical data accumulation, and means to handle relevant business information at home and abroad;
2. Have the ability to undertake foreign engineering consulting business independently or in cooperation with domestic and foreign engineering consulting units;
3. Professional and technical personnel directly engaged in business shall be equipped with no less than 1 computer per capita, with complete means of communication and information processing. They can apply engineering technology and economic evaluation system software to carry out business, and all use computers and system software to complete the compilation of engineering consulting documents and economic evaluation.
(4) Management level:
1. It has a sound organizational structure and management system;
2. It has strict quality management system and rules, and has passed the ISO9000 family quality management system certification.
Article 9 A Grade B engineering consulting unit shall meet the following qualification standards:
(1) Basic conditions:
1. Engaged in engineering consulting business for not less than 3 years, applied for professional services with not less than 5 corresponding consulting achievements and no bad records;
2. The registered capital is not less than 2 million yuan (except institutions);
3. Have a fixed office space, with a per capita use area of not less than 6 square meters.
(2) Technical strength:
1. There are not less than 30 technicians engaged in engineering consulting business, of which 30% have senior professional titles, registered consulting engineers (investment) are not less than 15% of the total number of technicians, and full-time retired professional technicians are not more than 10% of the total number of technicians. The above-mentioned personnel shall not practice in two or more engineering consulting units at the same time;
2. Each professional field shall be equipped with at least 5 corresponding professional technicians and at least 2 registered consulting engineers (investors);
3. The main technical person in charge shall have the qualification of registered consulting engineer (investment) and have engaged in engineering consulting and related business for not less than 8 years.
(3) Technical level and equipment:
1. Master modern engineering technology and project management methods, have advanced technical equipment, and have the means to accumulate professional technical information for business and query relevant professional information in time;
2. Professional and technical personnel directly engaged in business are equipped with no less than 1 computer per capita, and all of them use computers to complete the preparation of engineering consulting documents, and the application of economic evaluation system software reaches more than 80%.
(4) Management level:
1. It has a sound organizational structure and management system;
2. There are strict quality management systems and rules.
Article 10 A Grade C engineering consulting unit shall meet the following qualification standards:
(a) the registered capital of not less than 500 thousand yuan (except institutions);
(2) There shall be no less than 15 professional technicians, including no less than 30% with senior professional titles, no less than 15% with registered consulting engineers (investment) and no more than10% with full-time retired professional technicians;
(three) each professional field is equipped with no less than five corresponding professional and technical personnel and at least 0+65438 registered consulting engineers (investment);
(four) the main technical person in charge should have intermediate professional titles or registered consulting engineer (investment) qualification, engaged in engineering consulting and related business for not less than 5 years;
(five) have a fixed office space, the per capita use area of not less than 6 square meters;
(6) Strict quality management system.
Eleventh where the new application for engineering consulting qualification units, in general, should start with class C qualification. ..
Article 12 If an engineering consulting unit needs to broaden its consulting specialty and service scope due to business needs, it may apply for temporary qualification of consulting specialty and service scope at the corresponding level in accordance with the provisions of Articles 8, 9, 10 and 20.
Extended data:
Project management mainly includes the following ways:
1, Project Management Services (PM)
Project management service means that the project management enterprise prepares the feasibility study report, feasibility analysis and project planning for the owner in the project decision-making stage according to the contract.
In the project implementation stage, provide services such as bidding agency, design management, procurement management, construction management and trial operation (completion acceptance) for the owner, and manage and control the quality, safety, progress, cost, contract and information of the project on behalf of the owner. Engineering project management enterprises should generally bear corresponding management responsibilities in accordance with the contract.
2. Project Management Contract (PMC)
Project management contracting refers to that the project management enterprise can be responsible for completing the preliminary project design (basic project design) and other work agreed in the contract, in addition to completing all the work contents of project management service (PM).
For the project management enterprises that need to complete the preliminary design of the project (basic engineering design), they should have corresponding engineering design qualifications. Project management contracting enterprises should generally bear certain management risks and economic responsibilities in accordance with the contract.
3. Other project management methods can be adopted according to the different scale and type of the project and the requirements of the owner.
Decree No.29 of the National Development and Reform Commission of the People's Republic of China