Detailed explanation of construction technology of office glass partition decoration
A, office glass partition engineering material requirements
1, all glass varieties, specifications, properties, patterns and colors of the glass partition wall project shall meet the design requirements. Safety glass should be used for glass partition walls.
2. Aluminum alloy frame, stainless steel plate, section steel (angle steel, channel steel, etc. ) Metal materials and supporting materials used for glass partition wall, light metal thin-walled channel steel, support frame, etc. shall meet the design requirements and relevant regulations. Standard.
3。 Other materials, such as expansion bolts, glass support blocks, rubber fittings, metal fittings, structural sealants, etc. , should comply with the design requirements and related standards.
Second, the main tools for office glass partition decoration
The main tools for installing glass partition are: electric welding machine, impact drill, electric drill, cutting machine, wire saw, glass sucker, hacksaw, ruler, spirit level, tape measure, hammer, wrench, screwdriver, oblique ruler, glue gun, glass sucker machine, etc.
Third, the office glass partition construction conditions
1, the acceptance of the main structure of the office building has been completed.
2. The baseline and reference point of office glass partition installation have been tested.
3. The glass partition insert, connector or glass-filled metal notch has been completed and accepted to meet the requirements.
4. The glass mosaic notch is clean and the drainage is smooth.
5。 Scaffolding or corresponding installation facilities required for installation meet the requirements.
6。 Provide the required materials and assembly equipment.
7。 Appropriate installation measures should be taken before installation and approved by professionals. In addition, the glass partition engineering department of Hefei Jiezhuang Company stressed that when installing large pieces of glass, there must be professional guidance.
8. The temperature during construction shall not be lower than 5℃. ..
IV. Operation Process of Office Glass Partition Project
Office glass partition technology: elastic line positioning-frame cutting, assembly-frame fixing, fixed glass frame installation-glass installation-caulking glue-frame decoration-cleaning.
1, according to the design size, vertical lines will pop up on the wall, and the partition position will pop up on the ground and ceiling.
2。 According to the drawing requirements, place the lower part (cover plate, batten or brick) on the pop-up position line and fix it with the structures at both ends (brick wall or column).
3。 Complete the installation of the upper partition. The installation sequence is:
1 Check whether the wooden bricks on the brick wall are buried as required.
2 press the position line of the pop-up window and stand upright against the wall, and nail it to the wall with nails and wooden bricks.
Then nail, squat and coffin.
Detail construction technology of office glass partition decoration
Office glass partition not only has the traditional shell function, but also has the effect of storage and display, which not only saves office space, but also makes the office environment simple, modern and full of personality. It is a common partition method in modern office decoration. From office decoration's point of view, it has certain artistic decoration effect on the premise of satisfying the use function. Bian Xiao's introduction about office glass partition is here. For more information, please pay attention to Tuba Rabbit.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~