However, although the book has been written, the theory and skills in the book have not been fully mastered, and it needs practice and application.
In order to deepen my understanding, I will share the knowledge points in the book in modules-combining the essence of the two books and the relevant information I have compiled in the past.
The following is the first shared article (counting the search skills shared before, this article should be counted as the second)-about PPT color matching.
Two modes are usually used to define colors: HSL mode and RGB mode.
(1)HSL mode
Color is defined by hue, saturation and lightness. Adjust hue horizontally, adjust saturation vertically, and move the small arrow on the right up and down to adjust brightness.
(2)RGB mode
Color is defined by three parameters: red, green and blue, and the value range of each parameter is 0-255. Generally, when exchanging color schemes, RGB values of colors are used.
(1) the feeling of color
The most important thing to learn color is to feel it with your heart, and to describe your feelings about various colors with your heart: for example, whether a color is happy or sad, impetuous or steady, soft or solid, passionate or distant, unrestrained or rigorous, etc., instead of saying that this color is "very emotional" in general.
The feeling of color will change subtly with the change of hue, lightness and saturation. What is common is the warmth and coldness of colors.
Blue reminds people of the ocean and gives people a cold feeling. Red reminds people of fire and gives people a warm feeling. The closer the hue is to blue, the colder and more stable it is. The closer to red, the warmer and more active. It is generally believed that red, orange and yellow are warm colors, blue and cyan are cool colors, and green, purple, black, white and gray are neutral colors.
(2) the character of color
(1) What is a color wheel?
Create a color wheel with three primary colors of red, yellow and blue: first put three colors of red, yellow and blue on the disk of 120, then evenly mix two adjacent colors to get three intermediate colors, finally evenly mix two adjacent colors again to get six composite colors, and finally form a color wheel of 12 color.
(2) Color relationship
Homochromatic system: a group of colors formed by adjusting the brightness and saturation of a certain tone on the color wheel;
Adjacent colors: colors with a difference of less than 60 on the color wheel;
Same color: two colors with a difference of less than 90;
Complementary color: two colors, angle180;
Contrast color: two colors, angle120;
Split complementary color: a color is composed of two colors with 30 degrees on both sides of complementary color;
Four roles: four colors with a difference of 90.
(3) Color wheel tool
AdobeColorCC
The color matching of PPT is to choose main color and auxiliary color: the main color is to choose the color that echoes PPT according to its spiritual connotation, and the auxiliary color is to choose the color that can enrich its details and form a strong contrast with it according to the main color. There are four common color matching methods:
(1) Solid color
In the solid color scheme, there is only one color except black, white and gray: single hue, lightness and purity. This simple color scheme makes the picture pure and concise, and the effect is shocking. But the requirements for material selection are very high. Pictures, charts and other materials with high color activity will make the pure beauty of the picture disappear, so the picture materials are mainly vector pictures and hand-drawn, which requires higher painting level of producers.
(2) Same color system
It is composed of the same color system plus black, white and gray. The method of creating the same color system is as follows:
(3) Two-color stage
Usually consists of a warm color and a cold color, with the cold color as the main color and the warm color as the emphasis color. Common schemes are: red blue, blue yellow, yellow red, green orange and so on. This color scheme makes PPT clear and focused, and it is the most commonly used color scheme.
(4) Multi-tone
Multi-tone color matching contains more than three tones, and it is not recommended unless it has a strong ability to control colors.
(1) Use the color matching of enterprise VI, such as LOGO, brochure, website, etc.
(2) Use the "color picker" to get colors from excellent PPT, web pages and pictures.
(1) Japanese color
Features: The color scheme of this website is full of literary style, and each color has a corresponding name. After clicking the color, the page background will change to the corresponding color.
(2) Culture
Features: Online color editing is available.
(3) color search
Features: There are rich color schemes to choose from.
(4) Color Hunter
Features: You can upload pictures and identify color matching.
(5) Color matching treasure
Features: color matching can be selected according to color sense.
(6) Fratui
Features: Flat style color matching
(7) color mixer
Features: Input the RGB value of a certain color, and several suggestions for color matching will be fed back.
(At the end of this article, please look forward to the next one-about PPT fonts)
If you think this article is not bad, just click "Like". If you want to get more timely and good articles to share, then "pay attention" to me, and write at least one sincere work every week to live up to your expectations!
How to make a good-looking PPT and where to find PPT material? How to make a good-looking PPT and where to find PPT material?
PPT comes with its own background. If you don't think it looks good, you can PS your own pictures and import them into PPT, but there are many online, so you don't have to do it yourself. As for the material, there are many on the internet, whatever the theme and type, Baidu will do ~ remember to adopt it, dear.
How to make good-looking ppt
With the help of PPT materials and appropriate colors, there should be a relatively complete overall style display, especially with the content.
Nice ppt background material, nice ppt background material
Well, many ships can find this material station.
How to make a beautiful PPT?
Basic operation
Create courseware page
(1) Create a new document
Start PowerPoint and select Empty Presentation in the New Presentation dialog box.
(2) Choose the layout
The default is title slide. Choose courses according to your own needs;
(3) Enter the text
In the Insert menu, select the Text Box command, drag the mouse in the editing area, draw a text box, and then enter the corresponding text or paste the required text.
(4) Format the text
Similar to other WORD processing software (such as Word)
(5) adjust the text position
Adjust the position of the text by adjusting the position of the text box. First, select the text box to be adjusted so that eight control points appear on its border, and then drag the control points as needed, and the text box will change size accordingly. When the mouse pointer is placed anywhere on the edge of the text box except the control point, the mouse pointer will be accompanied by a cross arrow, and then drag the mouse to adjust the position of the text box.
Adjust the position of the text by adjusting the position of the text box. First, select the text box to be adjusted so that eight control points appear on its border, and then drag the control points as needed, and the text box will change size accordingly. When the mouse pointer is placed anywhere on the edge of the text box except the control point, the mouse pointer will be accompanied by a cross arrow, and then drag the mouse to adjust the position of the text box.
2, arrangement and modification
2. 1 Insert picture
(1) Select Insert-Picture, select the appropriate picture, and then click the Insert button.
2.2 Select a template
Click Slide Design on the Format menu and choose the appropriate template, or right-click the slide and choose Slide from the shortcut menu.
2.3 Application background
If you don't want to add a template to the courseware page, but only want to have a background color or picture, you can click Background in the Format menu to open the drop-down list box in the Background dialog box, or click Other Colors to select the appropriate color, or you can select Fill Effect.
2.4 Movies and sounds
Execute "File-Insert-Movie and Sound" and select the movie or sound in the file to operate. In order to prevent the courseware from being copied to other computers, you can put the sound or movie files and slide files in the same folder;
2.5 ft * * *
Use the "ShockwaveFlashObject" control component method.
1. Run PowerPoint2003 and switch to the slide where you want to insert Flas***.
2. Click the view menu, click the toolbar in the pop-up drop-down menu, and then click the control component toolbox in the pop-up submenu to display the control component toolbox.
3. Click other control components in the control component toolbox (the last button in the toolbox is marked with a circle in the above figure) to pop up the ActiveX control component window, which lists all the ActiveX control components installed in the system. Use the cursor control keys on the keyboard to find "ShockwaveFlashObject" in the control component list and click it. At this point, the system will automatically close the control component window.
4. Move the cursor to the editing area of PowerPoint, and the cursor will become a cross. Hold down and drag the mouse to draw a rectangular box of appropriate size. This rectangular area is the area where the animation is played.
5. Right-click the rectangular box, and then click Properties in the shortcut menu to open the Properties window.
6. Click the custom column in the Properties window, and a button will appear at the right end of the column. Click this button to open the property page window. Enter the full path of my file Flas*** in the text box to the right of the movie URL[M] (if Flas*** and PowerPoint files are in the same directory, you can just enter the file name of Flas***), and it must have the suffix ".". Sovereign wealth fund ". Other projects can use the system default, and finally press "OK" to return to PowerPoint.
7. Show the slide show and the picture you expect will appear.
3. Establish interaction
When demonstrating PowerPoint courseware, the default order is to play it in the order of courseware pages. By setting actions (hyperlinks) on the objects in the courseware page, the linear projection mode of the courseware can be changed, thus improving the interactivity of the courseware.
3. 1 Action button link
PowerPoint contains 12 built-in 3D buttons, which can perform actions such as forward, backward, start, end, help, information, sound, movies, etc.
Steps of making action buttons on courseware pages:
(1) Select the Action Button Click the Action Button submenu in the Slide Show menu and select the desired action button.
(2) Making Action Button After the mouse pointer becomes a cross, drag the mouse on the courseware page to make the required action button.
(3) Define Action Select the action to be performed after clicking the mouse in the Action Settings dialog box.
3.2 Graphical Object Links
Right-click the graphic object for which you want to set an action, and then select Action Settings on the shortcut menu. In the Action Settings dialog box, select the action to perform after clicking the mouse.
3.3 Text links
Select the text, right-click, and then select Action Settings on the shortcut menu. Other settings are as above.
Note: If you choose to play sound in the action settings, click the object during the slide show, and the sound will be played once until the sound is played or the slide show is over;
4. Animation
4. Basic characteristics of1PowerPoint animation
The basic features of PowerPoint animation function are:
First, the animation objects are diversified. Including text, graphics and images, can produce animation effects.
Second, animation action modeling. No matter what the animation object is, its action mode (or animation mode) is limited to more than 50 kinds specified in PowerPoint.
Third, the animation method is extremely simple.
4.2 preset animation
(1) In the slide view, click the object in the slide that you want to animate.
(2) Click the "Animation Scheme" command in the "Slide Show" menu, and then select an animation effect in the submenu;
(3) If you want to modify the animation effect of an object, just select the object and reset the animation effect; If you want to cancel the animation effect of the object, click the Close button in the preset animation submenu.
4.3 custom animation
(1) In the slide view, click the object in the slide that you want to animate.
(2) Click the Custom Animation command in the Slide Show menu, and then select the appropriate animation effect in the effect page.
(3) Click "Preview" to see the animation effect, and click "OK" to complete the setting.
4.4 Draw the path
PowerPoint also provides a wonderful animation function, which allows you to specify a moving route for an object in the slide, which is called "action path" in PowerPoint. Using "action path" can add very interesting effects to your presentation. For example, you can make a slide object jump and guide the audience's eyes to the important points to be highlighted.
In order to facilitate your design, PowerPoint contains a large number of predefined action paths.
If you want to specify an action path, select an object, and then select Custom Animation for Slide Show from the menu. Click the Add Effect button in the Custom Animation task pane. Select Action Path from the drop-down list, and then select a predefined action path, such as Right Upper Diagonal or Right Lower Diagonal. If you don't like the six preset paths listed in the submenu, you can also select other action paths to open the New Action Path dialog box. Make sure that the Preview Effect check box is selected, and then click a different path effect to preview it. When you find a satisfactory solution, select it and press the OK button.
5. Switch courseware pages
5. 1 Set the switching effect of courseware pages
(1) Select the first courseware page and click Slide Show in the Slide Show menu. In the "Sliding Switch" dialog box, set the courseware page to expand from middle to left or right or slow or other switching effects when clicking the mouse, and then click "Apply".
(2) If "Click the mouse to change pages" is selected, you can click the mouse to play the next slide continuously during the screening, otherwise you can only change pages by clicking the object with the action set.
Ask ppt how to make beautiful fonts?
Fonts can be downloaded from the Internet and then installed on the system disk /windows/fonts/, so you can change those fonts when you do PPT. Of course, only you can use PPT fonts, because others may not have installed those fonts, so you may not see them!
Where did you find the materials for the beautiful theme illustrations?
: Sakura Moon. /? fromuid=203849
How to make a good-looking empty nest panel? Where is the nice material?
:./f？ KW =% blast furnace %D5%BC%E4%CB%D8%B2%C4
Where are the ppt materials? It should look good.
Hello, the address is private, please check it.
How to create ppt creative colors, pictures, fonts, typesetting PPT elements are divided into images, sounds, actions, artificial explanations, words and so on. Among them, pictures and words are the most important elements of PPT. While displaying PPT, all the information in people's minds is connected to images and words, and people's explanations follow PPT. Others, including sounds and movements, also need to show multifunctional assistance.
First, the image is the main feature that distinguishes ppt from office software such as Excel and Word. Therefore, PPT should highlight this feature and use various methods to show the image to the extreme. All other means should serve the image element. Image elements include: pictures, charts, line combinations, text modules, colors and all other elements that can constitute an image.
Requirements:
1, the color difference should not be too big: when the whole PPT looks down, the picture should have a unified feeling, and the color difference should not be too big. Unless the contrast between the two is emphasized, these requirements are all in one module and one PPT; The inserted text is divided into two color blocks, generally 25% gray, and the title is 50% or 75% gray. The external frame is optional as required. In a PPT, all information frames should be left blank from the template, and 100% cannot occupy all the space. Of course, there are too many blanks, the visual effect is not good, and there is a sense of loss. Generally speaking, all information takes up 80%-95% of the template.
2. Unified picture combination style: whether the combination of pictures should show the main body or auxiliary text, after it is determined, the size and layout of the pictures should be sorted out. Each PPT should have a sequence, and the logical structure between multiple pictures should be regular. If they are parallel, the space ratio between them is 2: 1: 1 or 1: 1. Note: explanatory auxiliary pictures should be small but not large, and the main picture should account for more than one third of PPT; Leave a gap of about 1mm between pictures, depending on the combination of pictures; Don't use too many lines to express the picture information, and the number of circles and rows of each picture should not exceed 3, 1 is appropriate.
3, the chart display should be clear: in a PPT, it is best to have only one chart, because the chart is characterized by simplifying complex problems, so it is required that the chart must summarize complex problems with simple elements. If there are too many questions to fit in a chart, use two PPT to express them respectively, and fill in the blanks with words for the rest. In the chart display, when it comes to words, I personally think that words should be used as display images in the chart to meet the visual needs and the overall pattern distribution. The general title is No.20 in bold, the subtitle of the text is 18, and the text part can be 14 or 12 (other small words are 12 or No.9). Other fonts, such as Chinese fine black, Microsoft elegant black and regular script, can be used as auxiliary fonts, such as small line explanatory text, which can be distinguished by regular script. The figures in the chart can be Arabic numerals instead of Chinese characters. Generally speaking, the title should be vertically centered, while other data should be aligned left or right. The requirements of the chart box are generally thicker than the lines inside, usually 1.5 lb or 2.5 lb, and the line inside is 0.75 lb. For the collocation of charts and images, the chart box can be set as a color box or multiple frames.
4. The line combination should be beautiful: the line combination is equivalent to painting, and the lines used should naturally form a certain shape. The most common professional consulting tool model is a graph formed by the combination of lines. It combines the existing physical objects or thinking characteristics to explain the information to be expressed. It is required that lines have special meaning, be concise and clear, and be effectively combined with words and pictures, which is conducive to display. In line combination, it is worth introducing VISIO, a professional software for drawing charts. Pay attention to the layout of space and the significance of various graphics.
5, the text should highlight keywords: text appears as an auxiliary element in PPT, as mentioned above. In addition, the text should not be too much, not more than 8 lines at most, generally occupying about a quarter of the upper left corner as the description of the picture; If you want a picture to illustrate the text, you should ask the picture to have about one-third space on the left or right, and about two-thirds space in the middle and on the other side. Pay attention to the application of the original format when typesetting. If the original format is not required, then when typesetting, attention should be paid to selecting the appropriate format in the "Bullets and Numbers" in the title bar for typesetting. Generally speaking, it is best to paste it into PPT with word typesetting, and the format requirements such as line spacing and alignment can be well expressed.
Second, the sound includes the background sound that keeps ringing, and inserting an instant voice assistant requires inserting a paragraph in the middle. The background sound should be small and should not exceed the voice of the commentator, while inserting instant voice requires a loud voice, slightly exceeding the voice of the commentator. If you give a PPT presentation to others, you should measure the sound in advance. If you explain yourself, try to adjust it first.
Third, actions, generally speaking, don't be too dazzling in PPT presentation, such as "from middle to left" or "from right to left" and "unfolding", so as not to let the audience put too much energy here. Action is also an auxiliary means, which needs long-term accumulation to achieve various effects and form its own style.
PPT is a display tool often used in daily life. From its nature and function, according to its own habits and the requirements of the audience, it has formed its own style over time, and every production needs self-improvement. This is a process of continuous development.