Product Warranty 1 XX Company assures you that our products are produced in strict accordance with the ISO9000 certification management system, and now we provide the following quality guarantees for our products:
1. Our company guarantees that all indicators will be strictly inspected before the products leave the factory to ensure that the qualified rate of products reaches 100%.
2. Our company guarantees that within one year after the product is installed, debugged and accepted, if the product itself has quality problems, our company will be responsible for free maintenance. If the product exceeds our warranty period, we will also provide you with corresponding paid services within a reasonable range.
3. In any of the following circumstances, free warranty is not granted, but reasonable paid service can be implemented.
(1) failed to provide proof of purchase after the warranty period;
(2) Failing to use or maintain the product according to the requirements of the product instruction manual (pay special attention to water ingress, breakage and man-made damage);
(3) The customer repairs or dismantles the product without authorization, or the customer entrusts maintenance personnel not designated by the company to repair or dismantle the product;
(four) damage caused by the use of substandard and inferior communication cables;
(5) The product fails or is damaged due to irresistible disasters such as floods, fires, lightning strikes and earthquakes;
(6) Other failures or damages not caused by the product itself.
4. If there are problems in the use of the product, our technicians will answer them for you. If the problem belongs to product quality, our company promises to give a clear answer or solution within 24 hours. During the warranty period, on-site treatment is required to ensure that it arrives at the site within 48 hours.
XX company
Telephone: technical support:
In order to ensure the quality and delivery of products, clarify the product quality responsibilities of both buyers and sellers, ensure the quality of products is qualified, and ensure the safety and delivery of products, the following guarantees are made:
1. In principle, the quality of products provided by our company shall meet the technical standards specified by the buyer.
When the buyer does not have the specified technical standards, our company will follow the current national standards, and provide the buyer with product samples, which will be provided to the buyer after the buyer agrees, and ensure the stability and gradual improvement of product quality.
Second, about the guarantee of our material supply.
The materials supplied by 1. have passed the sample standard inspection to ensure the stability of the materials; Comply with relevant national regulations (such as environmental protection standards and reliability standards).
2. After your company confirms the brand and specifications in writing, the supplied materials will not be changed at will.
3. The shelf life of the supplied materials shall be calculated from the date of acceptance and warehousing by your company, and shall not be less than 1 year.
We recognize your goods acceptance system and strictly abide by your material acceptance system when accepting the supplied materials.
5. For the unqualified materials, ensure that they are replenished within the time specified by your company.
6. Before your company is put into use, if defective materials, brand inconsistencies and quality problems are found, it is guaranteed to return unconditionally and replenish qualified products within the time specified by your company.
7. If the quality problems of the materials we provide adversely affect your company, we are willing to undertake the rework and return of this batch of materials, and bear the economic losses and legal responsibilities caused thereby.
8. Each batch of orders must be executed according to your order requirements and delivered on time according to the delivery time of the order. If the delivery time cannot be met, you should negotiate with your company in advance and get your consent before the extension. If we delay the delivery time without your consent, which leads to the delay of your production time, we will bear the corresponding losses.
9. After placing an order, your company should pay a material purchase deposit of 20% of the total order amount. From the date when the goods are accepted and used by your company, your company should pay the remaining 80% of the purchase price of the order within 7 working days.
Supplier: Shenzhen Depeng Ye Wei Co., Ltd.
20xx year x month x day
Product Warranty Article 3 Dear users:
First of all, thank you for purchasing the output reactor (OCL- 1 10KW) produced by Shanghai Wangtai Electric Co., Ltd. Due to the unclear communication between the two parties in the early stage, our company produced according to the aluminum quotation, which was different from the copper expected by the buyer. Through consultation between both parties, in order to ensure the product quality, clarify the product quality responsibilities of the buyer and the seller, ensure the product quality is qualified and ensure the product safety, our company hereby makes the following guarantees:
1. In principle, the quality of products provided by our company shall meet the technical standards specified by the buyer. When the buyer does not have the specified technical standards, our company will implement them according to the current national standards and ensure the stability and gradual improvement of product quality.
2. The supplier guarantees that the products supplied meet the legal quality standards, and is responsible for the product quality, and provides the buyer with necessary quality information, such as product inspection reports and other relevant materials when necessary.
3. If the buyer complains about product quality problems, the supplier should actively cooperate to solve them properly. If it is really the responsibility of the supplier, the supplier shall bear all responsibilities and expenses.
Four. Handling of quality disputes (problems):
The buyer shall inspect the supplier's products in strict accordance with the established technical standards to ensure the fairness and scientificity of the inspection, and keep the remaining samples that fail the inspection for one week.
Our company will be responsible for the losses caused by the use of products that are really suppliers' quality problems. If the supplier's production quality problems are not used, the supplier and the supplier should negotiate to solve them.
5. This product quality guarantee shall come into effect when both parties sign the supply contract, and shall be terminated at the same time when the business is terminated.
Shanghai hongtai electric co., ltd.
Xx year 1 1.09
Since its establishment, Anhui Haida Technology Industry Co., Ltd. has always positioned product quality as the core of the company's participation in market competition. It is this successful positioning and the strong product quality awareness of all employees of Haida Company that makes Haida Company a well-known enterprise in the domestic electric power measurement and monitoring industry.
According to the product quality requirements, the company has established a strict quality inspection system. The company strictly controls and manages all links related to product quality, establishes scientific inspection procedures, quantifies inspection indicators, and puts the responsibility on people to ensure the company to produce qualified products continuously and stably.
The company strictly controls raw materials, puts an end to "three no products", selects well-known brand products at home and abroad, establishes strict product process indicators, and establishes a good supply-demand relationship with suppliers.
Haida Company has established a regular employee quality training system to learn new knowledge and information of quality management, establish the quality consciousness of each employee, standardize their own behavior, and be meticulous and strive for perfection from a solder joint and a wire to the whole machine. The quality inspection department has established a standardized inspection procedure, equipped with advanced and perfect inspection equipment and means, carried out inspection in strict accordance with the procedure, and made a good 7-day aging experiment of the product, thus preventing an unqualified product from leaving the factory.
The company's products have been tested by Anhui Technical Testing Institute every year, and all the performance indicators have passed the first test. We will make unremitting efforts to provide users with satisfactory products and services.
Product Warranty 5 Since its establishment, Shuang Bao Science and Technology Industry Co., Ltd. has always positioned product quality as the core of the company's participation in market competition. It is this successful positioning and the strong product quality consciousness of all employees of Shuang Bao Company that makes Shuang Bao Company become a well-known enterprise in China electric power measurement and monitoring industry.
According to the product quality requirements, the company has established a strict quality inspection system. The company strictly controls and manages all links related to product quality, establishes scientific inspection procedures, quantifies inspection indicators, and puts the responsibility on people to ensure the company to produce qualified products continuously and stably.
The company strictly controls raw materials, puts an end to "three no products", selects well-known brand products at home and abroad, establishes strict product process indicators, and establishes a good supply-demand relationship with suppliers.
Shuang Bao Company has established a regular employee quality training system to learn new knowledge and information of quality management, establish the quality consciousness of each employee, standardize their own behavior, and be meticulous and strive for perfection from a solder joint and a line to the whole machine. The quality inspection department has established a standardized inspection procedure, equipped with advanced and perfect inspection equipment and means, carried out inspection in strict accordance with the procedure, and made a good 7-day aging experiment of the product, thus preventing an unqualified product from leaving the factory.
The company's products have been tested by Henan Technical Testing Institute every year, and all the performance indicators have passed the first test. We will make unremitting efforts to provide users with satisfactory products and services.
Guarantor: xxx
Date, year and month
Article 6 Product Warranty Dear customers:
First of all, thank you for choosing our products!
Since its establishment, xx Electronics Co., Ltd. has always positioned product quality as the core of the company's participation in market competition. It is this successful positioning and the strong product quality awareness of all employees of the company that makes our company have a certain influence in the lightning protection industry.
According to the product quality requirements, the company has established a strict quality inspection system. The company strictly controls and manages all links related to product quality, establishes scientific inspection procedures, quantifies inspection indicators, and puts the responsibility on people to ensure the company to produce qualified products continuously and stably. The company strictly controls raw materials, puts an end to "three no products", selects well-known brand products at home and abroad, establishes strict product process indicators, and establishes a good supply-demand relationship with suppliers.
Xx company has established a regular employee quality training system, learning new knowledge and information of quality management, establishing the quality consciousness of every employee, standardizing their own behavior, from a solder joint and a line to the whole machine, so as to be meticulous and strive for perfection. The quality inspection department has established standardized inspection procedures, equipped with advanced and perfect inspection equipment and means, and carried out inspection in strict accordance with the procedures, so as to do every link of product quality inspection well and prevent an unqualified product from leaving the factory.
On this basis, we also make the following promise to you: All customers who buy xx series surge protectors of our company will provide relevant technical support free of charge for life to help them install and solve problems in the application process.
Any product we provide can be returned within one month (according to the purchase contract) if there is any quality problem. If it is not man-made damage within two years, we will unconditionally replace it with a new product.
Xx company
Xx，xx，XX，XX
Article 7 Product Warranty Party A: (Supplier)
Party B: (Buyer)
In order to safeguard the common interests of both the supplier and the demander, and in line with the principles of equality, mutual benefit, consensus and common development, this product quality assurance agreement is formulated.
Responsibilities and obligations of Party A
1. The products provided by Party A to Party B must be legally operated, and the product quality must meet the quality standards of enterprises and institutions. Party A is responsible for the quality provided to Party B. ..
2. Party A has the obligation to provide Party B with documents (i.e. product operation (production) license and business license) to prove the legality of product operation (production), and the production enterprise shall also provide the production approval documents, product quality standards and the ex-factory quality inspection report of this batch of products by the national product supervision and management department.
3. The packaging and identification of the products provided by Party A must conform to the regulations.
4. Party A must unconditionally replace the product quality problems found by Party B during the product warehousing inspection and within three months after the product warehousing.
Responsibilities and obligations of Party B
1. Party B shall provide Party A with legal documents for handling Party B's products.
2. When Party A delivers the products, Party B must carefully check the product name, specification, quantity and manufacturer according to the purchase contract. Check the legal documents of the arrived products, carefully check the packaging and identification of the products, and check the quality of the products by sampling. The quality problems and quantity errors of product packaging must be indicated on the delivery note.
3. The internal quality problems of products shall be inquired by Party A within three months.
4. Party B has the obligation to accept the follow-up consultation on the product quality of Party A in the future, and actively cooperate with Party A in quality consultation. Term of the agreement: from the beginning of business activities to the time when Party A's products purchased by Party B have no quality accidents.
This agreement is made in duplicate, one for each party. Matters not covered herein shall be settled by both parties through negotiation, and this agreement shall come into force upon signing.
Person in charge of Party A: (official seal) Person in charge of Party B: (official seal)
date month year