The consulting engineer exam is not divided into majors.
1, registered consulting engineers are divided into 3 1 majors;
2. Registered major of consulting engineer: (1) highway; (2) Railways; (3) Urban rail transit; (4) Civil aviation; (5) hydropower; (6) nuclear power and nuclear industry; (7) thermal power; (8) Coal; (9) Oil and natural gas; (10) petrochemical; (1 1) chemical industry and medicine; (12) building materials; (13) machinery; (14) electrons; (15) light industry; (16) textile chemical fiber; (17) steel; (18) Nonferrous metallurgy; (19) agriculture; (20) forestry; (2 1) communication information; (22) Radio, film and television industry; (23) Hydrogeology, engineering investigation and geotechnical engineering; (2) Water conservancy projects; (25) Port river and sea engineering; (26) Ecological construction and environmental engineering; (27) Municipal public works (professional disciplines: municipal transportation, water supply and drainage, gas heating, landscape architecture, environmental sanitation); (28) architecture; (29) urban planning; (30) engineering technology and economy; (3 1) others (according to specific majors, such as: tourism engineering, commodity grain, meteorological engineering, land resources, land consolidation, poverty alleviation engineering, immigration engineering, ocean engineering, new energy, etc. ).
Two. Registration requirements for registered consulting engineers
registration requirement
First, abide by national laws and regulations, abide by professional ethics, and meet one of the following conditions, you can apply to participate in the consulting engineer (investment) professional qualification examination:
1. Get a college degree in engineering or economics, management science and engineering, and have been engaged in engineering consulting business for 8 years.
2. Obtain a bachelor's degree or degree in engineering or economics, management science and engineering, and have been engaged in engineering consulting business for 6 years.
3. Obtain a double bachelor's degree in engineering or economics, management science and engineering, or graduate from a postgraduate class in engineering, and have been engaged in engineering consulting business for 4 years.
4. Obtain a master's degree in engineering or economics, management science and engineering, and have been engaged in engineering consulting business for 3 years.
5. Obtain a doctorate in engineering or economics, management science and engineering, and have been engaged in engineering consulting business for 2 years.
6. Obtaining the above-mentioned academic qualifications or other disciplines such as economic management, or other disciplines, and engaging in engineering consulting business will increase by 2 years accordingly.
Two, who meet one of the following conditions, can be exempted from "macroeconomic policy and development planning" and "project organization and management" 2 subjects:
1, the principal who won the National Excellent Engineering Consulting Achievement Award or the National Excellent Engineering Survey and Design Award.
2 through the national unified examination to obtain the professional qualification certificate of engineering technology, engaged in engineering consulting business for 8 years.
(2) Can consulting engineers only take one major? Extended reading
The examination subjects are divided into four subjects: macroeconomic policy and development planning, project organization and management, project decision analysis and evaluation, modern consulting methods and practice.
On 20 16, the examination subject of "Introduction to Engineering Consulting" was cancelled. The examination subjects were divided into four subjects: macroeconomic policy and development planning, organization and management of engineering projects, analysis and evaluation of project decision-making, and modern consulting methods and practice.
1, Section 1
Macro-economic policies and development plans mainly include macro-economic policies and national development plans, among which economic policies have more contents. There are relatively few calculation questions for the purpose of undergraduate course, mainly focusing on text understanding. In the review, we should pay attention to the understanding of policies and indicators, and pay attention to the memory of detailed test sites on the basis of grasping the logic of chapters as a whole.
2. The second theme
The main contents of "Organization and Management of Engineering Projects" include the basic theories, contents and methods of engineering project management, aiming at examining the candidates' mastery of this knowledge and their ability to use this knowledge to solve practical problems.
It should be noted that candidates should understand memory in combination with the characteristics of engineering projects and actual application procedures, while schedule management and cost management pay more attention to quantitative calculation, which is the difficulty of undergraduate purpose examination. Candidates need to master the network diagram and the calculation method of winning value.
3. The third theme
The content of project decision analysis and evaluation always revolves around a theme: project decision. To make a decision, we need to judge all aspects of the project, so this course involves a wide range of knowledge, including market strategy, marketing, engineering technology, financial analysis, economic analysis, probability analysis, risk analysis and so on.
While learning these knowledge, we must pay attention to the relationship between them and use them comprehensively. The objective investigation of undergraduate course takes the form of objective questions, with a large amount of calculation, generally around 15-20 questions. When reviewing, we should pay attention to the comprehensive coverage of reading, accurately grasp the concepts, and memorize key knowledge points and keywords.
4. The fourth theme
In 2009, the new syllabus "Modern Consulting Methods and Practice" covers the knowledge points of the first 4 subjects and 25 chapters, and adopts subjective examination. From concept to method, from theory to case, candidates are required not only to have a macro knowledge background, but also to test the practical ability of using consulting methods, analysis, demonstration, calculation and judgment.
Candidates need to make a scientific study plan and arrange the review time reasonably; Thoroughly understand the concepts in the book, correctly grasp the methods, use them flexibly in practical application, thoroughly interpret and master the essentials of knowledge, and integrate knowledge with practical cases; Find ways to control problems and learn how to apply what you have learned to engineering consulting practice.
Ⅲ Is it necessary to take the consulting engineer certificate?
The role of consulting engineer certificate:
1, registered consulting engineer (investment), refers to the professional and technical personnel who have obtained the Qualification Certificate of People's Republic of China (PRC) Registered Consulting Engineer (investment) through examination and engaged in engineering consulting business in the field of economic construction after registration. All institutions engaged in engineering consulting business in economic construction must be equipped with a certain number of registered consulting engineers (investment).
2, the specific measures shall be formulated separately by the State Development Planning Commission. The professional qualifications of national professional and technical personnel in key positions in the engineering consulting industry shall be brought into the unified management of the national professional and technical personnel professional qualification system. This exam is a special exam for this purpose. Only by passing this exam, it shows that it has the corresponding level and ability, can it obtain the qualification of engineering consulting industry. This qualification is valid nationwide.
Ⅳ What conditions can a consulting engineer apply for?
If you consult an engineer, this condition is not good. Under normal circumstances, you can apply after graduating from junior high school.
Ⅳ Can I register as a registered consulting engineer for business administration?
Business administration is not a major in engineering economics, but you can apply for it, and your work experience needs to be increased by 2 years. inside
The application conditions are as follows, please refer to Article 6:
Conditions for taking all subjects (four subjects)
Any citizen of People's Republic of China (PRC) who abides by national laws and regulations and meets one of the following conditions may apply for the qualification examination of registered consulting engineer (investment).
1, having been engaged in engineering consulting related business for 8 years after graduating from engineering technology or engineering economics;
2, engineering technology or engineering economics after graduation, engaged in engineering consulting related business for 6 years;
3. After graduating from the second bachelor's degree or postgraduate class in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 4 years;
4. After obtaining a master's degree in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 3 years;
5. After obtaining a doctorate in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 2 years;
6. Those who have obtained the above-mentioned education or degree in non-engineering technology and engineering economics will have a corresponding increase of 2 years in engineering consulting-related business years;
7. Other conditions stipulated by the Ministry of Personnel and the National Development and Reform Commission.
ⅵ Are consulting engineers of the National Development and Reform Commission divided into different majors?
There is no distinction between majors when taking the exam. You need to be divided into majors when you sign up. The registered major mainly depends on your academic qualifications and the specific professional work you are engaged in!
ⅶ Can registered consulting engineers take exams in different places every year?
You can take the exam in different places, and it is a national exam. After the exam, you can go to the last place to apply for a certificate.
The assessment results are managed in a rolling way, with a period of three years. Participants in all five exams must pass all subjects within three consecutive exam years; Those who are exempt from some subjects must pass the examination subjects within one examination year. In principle, the examination results will be published on the national professional and technical personnel qualification examination service platform and the websites of personnel examination institutions in various provinces (autonomous regions and municipalities) within two months after the end of the examination.
Those who pass the examination shall be awarded the "People's Republic of China (PRC) Registered Consulting Engineer (Investment) Qualification Certificate" by the Department of Human Resources and Social Security of the provinces (autonomous regions and municipalities). To obtain the qualification certificate by improper means, by the provinces (autonomous regions and municipalities) professional and technical personnel management departments to recover the qualification certificate, and according to the "professional and technical personnel qualification examination disciplinary provisions" (People's Republic of China (PRC) and Ministry of Human Resources and Social Security DecreeNo. 12) severely dealt with.
(7) Can consulting engineers only take one major? Extended reading
registration requirement
Any citizen of People's Republic of China (PRC) who abides by the law and meets one of the following conditions may sign up for the qualification examination of registered consulting engineer (investment):
1. After graduating from college majoring in engineering technology or engineering economics, I have been engaged in engineering consulting related business for 8 years.
2. After graduating from engineering technology or engineering economics, he has been engaged in engineering consulting related business for 6 years.
3. After graduating from the second bachelor's degree or postgraduate class in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 4 years.
4. After obtaining a master's degree in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 3 years.
5. After obtaining a doctorate in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 2 years.
6, non-engineering technology or engineering economics major or above, engaged in engineering consulting related business life increased by 2 years.
7. Other conditions stipulated by the Ministry of Personnel and the State Development Planning Commission.
ⅷ What do registered consulting engineers usually study?
Examination conditions for registered consulting engineer:
Any citizen of People's Republic of China (PRC) who abides by national laws and regulations and meets one of the following conditions may apply for the qualification examination of registered consulting engineer (investment).
1, having been engaged in engineering consulting related business for 8 years after graduating from engineering technology or engineering economics;
2, engineering technology or engineering economics after graduation, engaged in engineering consulting related business for 6 years;
3. After graduating from the second bachelor's degree or postgraduate class in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 4 years;
4. After obtaining a master's degree in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 3 years;
5. After obtaining a doctorate in engineering technology or engineering economics, he has been engaged in engineering consulting related business for 2 years;
6. Those who have obtained the above-mentioned education or degree in non-engineering technology and engineering economics will have a corresponding increase of 2 years in engineering consulting-related business years;
7. Other conditions stipulated by the Ministry of Personnel and the State Development Planning Commission.
What are the professional requirements for consulting engineers to apply for?
Requirements for consulting engineers to apply for majors:
1, and "major" refers to the related disciplines set in the Catalogue of Undergraduate Majors in Colleges and Universities (20 12) (Jiaogao [2012] No.9) issued by the Ministry of Education, as follows: "engineering discipline" refers to all majors under the discipline of "engineering";
2. "Economics" major refers to the economics major and economic statistics major in "Economics" under the discipline of "Economics";
3 "Management Science and Engineering" major refers to management science, information management and information system, engineering management, real estate development and management, and engineering cost major.
4. Candidates from other majors outside the above-mentioned professional scope have been engaged in engineering consulting business for 2 years.
ⅹ Registered consulting engineer is very difficult to test. I have worked for six years and want to get a certificate.
The examination of registered consulting engineer is very difficult, and the knowledge of consulting engineer covers a wide range. It is necessary to have a deep understanding and comprehensive grasp of project decision-making, macroeconomics, procurement bidding management and other related aspects.
Secondly, candidates who take the consulting engineer exam should also have a corresponding understanding of the content, outline and question types involved in the exam. It is difficult to consult an engineer, and the cumulative pass rate from the exam is only about 10%.
(10) Can consulting engineers only take one major? Extended reading:
Examination content
In 2020, the qualification examination of registered consulting engineer (investment) still uses the 20 19 version of the examination outline, and the reference textbook for the 2020 version of the examination is only modified on the basis of the 19 version of the textbook.
However, according to the needs of the development of the situation, with the consent of the relevant departments of the National Development and Reform Commission, the Law of the People's Republic of China on the Promotion of Circular Economy and the Outline of the National Land Use Master Plan (2006-2020) were added to the specific contents of the examination;
Announcement of the National Development and Reform Commission (No.37, 2008) issued the Outline for Preparation of Consulting and Evaluation Report of Enterprise Investment Projects, Several Requirements for Consulting and Evaluation Report of Enterprise Investment Projects, and Provisions on Planning Environmental Impact Assessment.
The examination textbooks for registered consulting engineers include the Examination Outline for Registered Consulting Engineers, Macroeconomic Policy Formulation and Development Planning, Project Organization and Management, Project Decision Analysis and Evaluation, Modern Consulting Methods and Practice, an outline and four examination books.