1. Turn off the phone and remove the two screen fixing screws at the bottom with a hexagon screwdriver.
2. Gently pry a hole with a knife near the upper position of the bottom screw. The original screen is easier to disassemble. Excessive force when assembling the screen will cause the screen to break. Of course, be careful. If it can't be removed for a while, you can blow the bottom with a hair dryer. There is a white sealing tape on the edge of apple 6, which can be better removed by blowing.
3. Gently lift it from the back of the screen, and the screen cable is connected to the motherboard. Remove the five screws of the red frame column, and remove the shield.
4. Then remove the flat cable with an antistatic warping machine.
5. Put the removed screen at one end, with fingerprints on the screen, and the removal is complete.