1. To set up a DNS domain name server, we first need to open the Network Connection window. You can open the network connection window through the right-click menu of Online Neighborhood, Properties or the right-click menu "Open Network Connection" of the small network icon in the lower right corner of the desktop;
2. In the opened "Network Connection" window, select the network connection (network card) where you want to set the DNS domain name server, and select "Properties" from the right-click menu to open the network connection properties window;
3. In the network connection properties window, select Internet Protocol (TCP/IP)- Properties to open the Internet Protocol (TCP/IP) properties window. You can see how to get the IP address and DNS server settings. If you are currently "automatically obtaining the IP address", you need to select "Use the following DNS server address" to set the DNS server (in general, it is enough to use "automatically obtaining the DNS server address"; if the automatic obtaining of the DNS server address fails, you only need to manually set the DNS;
4. How do I know which DNS server IP address to set? On the one hand, you can consult your network administrator or residential broadband technicians. On the other hand, when connecting to a router, it is very common to obtain DNS server information through the network information of the router. As shown in the figure, the DNS domain name server information filled in above is obtained through the networking information of the router;
5. Next, we can wait to check the set DNS information in the return window. In the network connection window, right-click the network connection icon and select Status, or double-click the network connection icon to open the network connection status window, and then select Details to view the newly set DNS server information.
6. If you need to use the specified IP address, you need to select "Use the following IP address" in the "Interent Protocol (TCP/IP) Properties" window and fill in the correct IP address information. At this time, the DNS server cannot get it automatically, and you need to enter it manually.
7. After setting, in the network connection window, right-click the network connection icon, select status or double-click the network connection icon to open the network connection status window, and then select details to see the newly set DNS server information;
8. You can also view DNS information through the command line command, enter "cmd" in "Start"-"Run" and press Enter to call up the command line program. Then use "ipconfig/all" to view the set or obtained DNS information;
9. After the setting is completed, open the browser to check whether the Internet is normal, or you can check the Internet status through the command line ping command, as shown in the figure, indicating that you can access the Internet normally.
The above is all about how to set up DNS domain name server under winxp system. Users who need it can set it according to the above method!