Safety operation procedures for climbing work?

It is very important to know the safety operation rules of climbing operation. The original intention of formulating regulations is to better ensure the safety of operation, and it is very important to handle every detail. Zhong Da Consulting will explain the safe operation procedures of climbing operation for you.

1. Climbing mainly involves the risk of falling and squeezing. 2. The term "high-altitude operation" as mentioned in these Measures refers to the operation that may fall from a height of more than 2 meters (including 2 meters) from the datum. 4. Units engaged in aerial work must apply for the Application Form for Dangerous Operation, and construction can only be started after safety protection measures are implemented. 5. The approver of Hazardous Operation Application Form must go to the aerial work site and check the safety measures before approving aerial work. 6. Climbing operators must receive safety education and be familiar with the site environment and construction safety requirements. People with occupational contraindications, weakness, fatigue, poor eyesight and drunkenness are not allowed to work at heights. 7. Before climbing the mountain, the operators should check the Application Form for Dangerous Operation and check the implementation of safety measures before construction, otherwise they have the right to refuse construction. 8. Climbing workers should wear labor protection articles according to regulations, check before operation, and correctly use anti-falling articles and climbing appliances and equipment during operation. 9. When working at heights, a guardian shall be set up to supervise the workers at heights, and the guardian shall stick to his post. 10. Tools, materials, parts, etc. Those used in climbing operations must be put into tool bags, and objects must not be held up and down; No throwing tools, materials and other items; When tools and materials that are easy to slide and roll are stacked on scaffolding, measures should be taken to prevent falling. 1 1. Scaffolds used for climbing operations must comply with the Technical Code for Safety of Building and Installation Engineering 12. When climbing asbestos shingles, corrugated cardboard and other light materials, solid scaffolding must be laid and fixed, and anti-skid measures should be taken on the scaffolding. 13. The aerial work site shall keep a specified safe distance from overhead wires, a distance of more than 1 m from ordinary wires, and a distance of more than 2.5 m from ordinary high-voltage wires, and the transported conductor materials shall be prevented from contacting the wires. 14. Climbing operation should keep in touch with the ground, equip with necessary communication tools according to the site conditions, and designate special personnel to be responsible for the contact. 15. Before climbing, the person in charge of the construction party should fill in the Application Form for Dangerous Operation, formulate safety technical measures for climbing, and submit them to the safety officer of the unit for review and approval by the competent leader. 16. After the application for dangerous operation is approved, the person in charge of climbing operation must give instructions for climbing operation. Without formal operating instructions, the operator has the right to refuse to work at heights. 17. Before the operation, the person in charge of climbing operation should give targeted safety education to all climbing operators, and implement safety measures according to the operation contents and possible accidents. 18. The responsibility of the department where the operation is located is to check and implement the on-site operation safety measures together with the person in charge of the operation to ensure that the workplace meets the safety regulations for working at heights. 19. The climbing operation site must meet the requirements of safety production site management. The job site should be clean and tidy, the roads should be smooth, and there are obvious warning signs such as "No Entry for Idle People" and "No Entry", and irrelevant personnel are prohibited from entering. 20. For the construction project with a long construction period, the person in charge of the construction should often go to the site for inspection, find hidden dangers and make timely rectification, and make records. If the construction conditions change significantly, the Application Form for Hazardous Operation shall be handled again.

The detailed information of "Safety Operation Rules for Climbing Work" can be found in Zhong Da Consulting and Design, and all relevant building construction materials you want are available.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd