Tools/materials
Thin cross screwdriver, flat screwdriver, tweezers, blade, soft cloth.
0 1
02
03
04
operational approach
0 1
How to remove the notebook cable The first type is the dark cable. This kind of cable arrangement device is generally distributed on the keyboard and touchpad of the notebook. If we remove the shell of the computer, we will find that the color of the interface is very different from that of the base. And the cable is wider. In this case, we usually use sharp things (such as paper clips) to push out the key chain of the interface with tools.
02
Second, the socket interface. This cable arrangement device is used in equipment adjacent to the computer motherboard, such as fans, batteries, etc. When the same pit is removed, you can find several red and white combination lines inside. Some bags are ready and some are not. These wires are usually connected to the audio and fans by the motherboard. Their interfaces are designed to be relatively wide, so the cable can be removed without tools, and the protruding objects can be grasped with nails and gently shaken out. If you can't come up with special skills, you need to use tools to push the wider part outward, or you can remove it.
03
Third auxiliary lock cable. The cable is also located in the keyboard and touchpad. This cable arrangement is usually in ultrabooks. In order to meet the market demand, manufacturers make notebooks as thin as possible, so that electronic components will not overlap and will only be roughly parallel. When you remove this kind of cable, you will find a lock with great color difference from the surrounding interface. When you find this lock, gently pry it open with a flat screwdriver. Fourth, lock the handle. This lock is located on the connecting axis between the keyboard and the screen, and it is also the key part to guide keyboard commands. Because its interface is similar to a door handle, we call it this way. When we need to dismantle it, we just need to lift it with something similar to a handle device, then use a flat-head screwdriver to insert it into the interface at the lower end and gently pry it up, and then gently pry it up at both ends.
04
The laptop screen is damaged. Do-it-yourself screen changing tutorial 1. Choosing a laptop screen Now online shopping has become very popular, and it is very convenient to buy laptop screens on various shopping websites. The prices I learned from the Internet are generally about 300 screens with good quality and about 270 screens with a few bad points. Readers can choose the appropriate screen to make changes. 2. Remove the damaged notebook screen. First, remove the laptop battery (remember, otherwise it may burn out the computer) and turn off the power. Pull out the gasket with screws beside the notebook screen, then unscrew the screws with a small Phillips screwdriver and remove the screen shell. 3. Unplug the cable and remove the damaged screen. As shown in the figure below, find the screen interface. First, tear off the adhesive tape of the cable, grab the root of the cable and gently pull it out (turn it in the right direction, and don't destroy the cable port with brute force). 4. Install the purchased intact screen, align the screen wire removed in the previous step with the bayonet of the new screen, push it into the bayonet, and hear a slight click. 5. Replace the filter screen shell and soft washer. Replace the screen housing in turn according to the steps just removed, and lock the screws. The first step in the whole process of notebook disassembly: preparation: prepare tools (thin cross screwdriver, flat screwdriver, tweezers, blade, soft cloth) and the notebook to be disassembled. Step 2: Take out the battery, turn the back of the notebook upward, open the fixing bolt of the battery, and take out the battery. Step 3: Remove the back cover. Unscrew the fixing screws of the two covers on the back of the notebook and take off the covers. Step 4: Remove the hard disk, unplug the hard disk cable and take out the hard disk. Step 5: Take out the network card, gently pull out the network card from the data slot, gently pry open the metal clip of the power cord and take out the network card. Step 6: Remove the keys, turn the notebook face up, open the LCD screen, gently pry open the keys on the upper part of the keyboard and turn them up. Then, open the cable connected to the motherboard and take out the button. Step 7: Disassemble the keyboard, gently pry it open and turn it up (be careful not to break the lower line), disassemble the line and take off the keyboard. Step 8: Remove the LCD screen. Disconnect the two connecting wires between the LCD screen and the motherboard, including the power cable and the data cable. Unscrew the fixing screws of the display screen and remove the display screen. Step 9: Remove the touchpad. Gently disconnect the connecting wire between the touchpad and the motherboard, and remove the main housing of the touchpad. Step 10: Remove the optical drive and other fixing screws, and remove the optical drive, radiator and fan on the back. Step 11: Dismantle the motherboard. Unplug the flat cable and the socket of the next line in the picture. Then, pay attention to the connecting wires below when removing the motherboard, and remove the motherboard and accessories. Step 12: Take out the memory module, gently push the memory module fixing metal clips to both sides, and the memory module will pop up, and then pull out the memory module. Step 13: Take out the CPU, loosen the metal clip of the CPU, and pull out the CPU.
end
Disclaimer:
The contents of sogou guide on this page only represent the author's personal views. In case of any dispute arising from this, the author shall be responsible for it, which has nothing to do with sogou Company. The contents of sogou guide on this page are for reference only. Please operate carefully according to your actual situation. Especially for matters involving your interests or the interests of third parties, please consult professionals.