What should be paid attention to in water conservancy and hydropower construction?

When you have a new house, you usually decorate it before moving in. The first is, of course, water conservancy and hydropower construction. In order to be used normally in the later period, the following matters should be paid attention to in the construction of water conservancy and hydropower: communicate with designers, leave a water outlet in the bathroom and do a good job in positioning.

1, communicate with the designer. In general, the construction drawing of water conservancy and hydropower construction is provided by the designer. Before renovation, the owner had better know the layout in advance, find out the position and quantity of sockets and switches in each room, and check the layout of water pipes to avoid problems in water conservancy and hydropower construction.

2. Leave a water outlet in the bathroom except for the washbasin, washing machine and toilet. You can also take it out to mop the floor and pick up water later. At the same time, be careful not to use deep-water floor drains in the laundry area. The installation of deep-water floor drain in the bathroom can basically meet the needs because of the small displacement. The washing machine drains water quickly, with large displacement, and the deep-water floor drain drains slowly, which is easy to overflow, which is unnecessary in water conservancy and hydropower construction.

You can prepare a marker and a tape measure to locate. Although the general electrician will carry it with him, it can also be just in case. Be sure to go to the site to confirm after positioning, and pay attention to the position of each electrical appliance.

When positioning water and electricity, you can invite all the businesses of bathroom and electrical appliances. Almost at the same time, if you buy solar energy, you can also invite solar energy suppliers. If you want to use water purification equipment, it is best to invite merchants and plumbers to discuss the distribution and positioning of water and electricity. General cabinet manufacturers and integrated ceiling manufacturers will provide a hydropower map, remember to explain it clearly to the plumber to ensure the safe construction of water conservancy and hydropower.

The above are the three core issues that need to be paid attention to in the process of water conservancy and hydropower construction. I hope that the owners can know in time and do a good job in supervision to ensure that the house has a good water circuit structure and is comfortable to live in.