There is no need to disassemble and clean up the car carbon deposit. Harm of carbon deposition.
Carbon deposition has a lot to do with cars. Will reduce engine power and increase fuel consumption. In severe cases, it will also lead to engine knocking, accelerating noise, piston and crankshaft damage, and even affect the situation that the engine needs to be overhauled when burning oil. Carbon deposition is not only harmful to cars, but also very harmful to the environment. Will directly affect the automobile exhaust emissions, making it unable to pass the annual inspection.
There is no need to remove carbon deposits from the car when cleaning. Knowledge introduction: cleaning process.
1. Clean the throttle
Remove the engine decorative cover, remove the throttle, clean it with carburetor cleaner, dry it with cotton cloth and install it. Basically, every time we go to the 4S shop to clean the accelerator, the maintenance staff will basically advocate us to do so. In most cases, the cleaning cycle of the throttle valve is 2,000 kilometers. According to different brands and models, the charges of 4S shops vary greatly, ranging from 200 yuan to 800 yuan. I think you can clean the throttle yourself and save a lot of money. Because the process of cleaning the throttle is very simple and the cost is extremely low, as long as you need to buy a bottle of carburetor cleaner, 10 yuan can do it.
2. Remove the carbon deposit inside the engine.
Open the oil cover, pour in the whole box of cleaning agent (mixed with old oil), cover the oil cover, and turn off the engine after idling 10 minutes. Removing carbon deposits in the engine and dissolving sludge, colloid, water, metal chips and other deposits in the engine with cleaning agents can reduce the pollution of new engine oil and prolong the service life of the engine.
3. Remove the carbon deposit in the oil circuit.
Before refueling, add the whole bottle of fuel additive to the automobile fuel tank. Read the instructions clearly. How many liters is the fuel tank of your car? Up to 50&; Mdash Fuel additive for 80-liter automobile fuel tank. Cleaning the carbon deposit in the oil circuit includes cleaning the fuel injector, combustion chamber, spark plug and throttle. The purpose is to solve the problems of insufficient horsepower, oil consumption, wheezing, poor acceleration or difficult start-up caused by carbon deposit, colloid and dirt in the oil system.
4. Remove the carbon deposit in the air intake system:
Buy a bottle of cleaning agent for the air intake system, pour it into the liquid storage tank of special cleaning equipment, connect the air intake system, and suck the cleaning agent into the air intake with the help of a vibration motor vehicle to achieve the purpose of cleaning. The key to remove carbon deposits in the intake system is to remove carbon deposits in the intake port and intake manifold. The purpose is to remove the carbon deposit in the intake system, increase the intake flow and speed, and shorten the engine jitter and idle instability.
The development of carbon deposition is not a day or two. It takes a long process, just like a kettle at home. When there is not much water and alkali, you can cook it with vinegar, but if it is not treated for a long time, you can only dig it with hard things when the water and alkali are strong. The above is a brief introduction of our car editor to a friend. Cars do not need to be cleaned by removing carbon deposits. Let's briefly introduce the knowledge first. Please pay more attention to this site for more knowledge!
Million car purchase subsidy