..... 2, WLan port is used to connect broadband cats, just use the network cable provided by ISP. Lan ports are used to connect computers without wireless network cards. Please use a directly connected parallel network cable.
3. Take your broadband routing IP as an example:192.168.1.1.
..... 4. Set the network parameters of the machine (right-click My Network Neighborhood-Properties-right-click Local Area Connection (wireless network card selects wireless link)-Properties-find TCP/IP protocol and double-click):
IP address:192.168.1.11; 1 92. 1 68.1.12 ... (and so on,1machine1,not repeated)
Subnet mask: 255.255.255.0
Gateway: 192. 168. 1.
DNS:192.168.1(or Baidu, check your local DNS, such as Guangzhou DNS).
Make sure all the way
..... 5. Now you can double-click the wireless link to connect the wireless router. Open IE browser on your machine, type192.168.1.1in the address bar, and press enter. Then enter the correct user name and password (refer to the routing instructions). General user name and password are admin, log in to the routing management interface.
..... 6. Click "WLan Settings" to set (please refer to the routing instructions for detailed settings):
Dialing method: PPPOE (if you are an ADSL user)
User Name: Your ADSL dial-up user name.
Password: You know I don't know.
Dial-up connection mode: automatic dialing; And enable the redial function of disconnection.
protect
7. Well, both wired and wireless can enjoy the Internet now.
..... 8. "Right-click My Computer-Properties-Computer Name-Change" for each computer: set a different computer name in English (letters and numbers) for each computer; Establish the same working group. Ok, the LAN of the same working group has been established.