Specification M 10× 1.5 profile height: h = 0.810/95 mm, thread middle diameter 9.02575mm, small diameter 8.37625, large diameter10 mm.
M 10×0.75 large thread diameter 10.000mm, medium thread diameter 9.645mm and small thread diameter 9.378 mm. ..
The major diameter of M 10× 1 thread is10.000mm, the middle diameter is 9.350mm, and the minor diameter is 8.917mm. ..
Matters needing attention when using screws:
1, pay attention to the use of screws, and choose the appropriate screw product type according to the occasion. For example, if we want to install screws in wet places, then we can choose corrosion-resistant stainless steel screws. If you want to fix the license plate on the car, you can use anti-theft screws with good anti-theft and anti-disassembly performance. If you want to fix the object firmly on the wall, you can choose expansion screws and so on.
2. When using screws, we need to align the screws with the mounting holes for installation. When installing the screw, it must be firm and cannot shake, so as to avoid the problem of inclination when installing the screw. When installing screws, it may be necessary to drill holes first, and choose the size of the drill bit to avoid drilling too big or too small.
3. Before installing screws, be sure to pay attention to the selection of screw diameter and length. If the nominal diameter of the screw is too large or too small, these will affect the normal use of the product. If the length of the screw is too short, the screw may not be able to firmly fix the object. When the screws are not used, be sure to do a good job in rust prevention and other related work.