According to the projection area calculation
Projected area = cabinet width * height
Suppose a wardrobe is 5 meters long and 3 meters high, and the unit price is 500 yuan/square meter, then the total cost of this wardrobe is 5 * 3 * 500 = 7500 yuan.
Advantages: simple calculation
Disadvantages: Merchants generally have restrictions on the number of internal shelves, and complicated internal design will require extra money. In addition, wardrobe doors, drawers and hardware should be priced separately by piece.
Matters needing attention in projection estimation:
1. Whether there are restrictions on the layout of cabinets, whether it is necessary to calculate the money if there are more laminates, etc. You must consult clearly before buying, so as not to be cheated by the merchants' free design routines.
2. How many colors are there, and whether the packaging price has a door or no door. Some pits are limited to 2-4 colors, and cabinets are limited to white (mainly for money). Is there a charge for more than three kinds of door panel color matching?
3. Whether the sealing plate/convergent strip is closed. (Merchants with pits in the foot line of the side sealing plate of the top sealing plate also collect money by the meter)
4. Whether the prices are consistent. Some pits, the first wardrobe is cheap, and the one behind it is very expensive.
5. For the thickness of plate, it is recommended to choose the back panel of 9mm wardrobe.
Calculated by expanded area
In other words, the area of each face seen by the cabinet must be calculated separately. Add up all the used board areas, multiply the sum by the unit price, and add the separate prices of wardrobe doors, drawers and hardware, which is the total cost of the wardrobe.
Wardrobe price = wardrobe development area (square meter) * unit price of plate (yuan/square meter)+price of hardware accessories and other accessories (yuan)
Advantages: you can choose the internal structure of the wardrobe according to your living habits to control the budget, and the price is more transparent.
Disadvantages: the calculation is complicated, generally aiming at the cabinet algorithm, excluding some other functional accessories, such as drawers and grilles.
All right, wardrobe, that's enough.
1. Look at the wardrobe plates. Solid wood particle boards are mixed in quality, only big brands are recognized, the environmental protection grade is E 1, and the thickness is 18mm.
2. Look at the wardrobe cover. Scrape with a key. If it can scratch the mark, discard it decisively. Good veneer is wear-resistant, corrosion-resistant, waterproof and moisture-proof.
3. Look at the edge of the wardrobe. All sides of the board are sealed with ABS edge sealing tape, and formaldehyde is sealed inside! Do not consider single-sided seal or thin seal!
4. Look at the back of the closet. There are 3mm, 5mm and 9mm on the market. The back plate should not be too thin, and it must be 9mm, moisture-proof and compressive.
5. Look at that sliding door. Whether the sliding door can be used for 10 or 70 years depends not on the door, but on the slide rail. You can't go wrong in choosing a big card.