Wang Hui information consultation

If there is no mobile device connected to the Internet at home, there is no need for a wireless broadband router. Just use a network cable to connect the optical cat network port, set up a dial-up connection on the computer, and the computer can surf the Internet. If there is a demand for mobile devices to access the Internet, a network cable broadband router is needed. The setting method is as follows for reference:

The optical cat connects the router, and the steps for setting up the wireless router are as follows:

After connecting the router, the optical cat needs to set up the broadband router correctly before surfing the Internet. Here, taking Mercury router as an example, the setting methods and steps of wireless routers are introduced. The setting methods of other brands of routers are basically similar:

Step 1: Connect the wires.

Before there were routers, we used computers to connect directly to the Internet port in Guang Mao. Now, if you want to use the router to enjoy broadband internet access, of course, you must first use the router to directly connect to broadband. So the first step to do is to connect the front-end optical cat output network cable to the router (WAN port), and then connect the computer to the router (LAN port), as shown in the figure below;

Step 2: Log in to the router.

Turn on the computer, click IE browser, enter: melogin.cn or 192. 168. 1 in the address bar, press enter to enter the login interface of Mercury router, and set the login password of the router in the pop-up window (the password length is in the range of 6- 15), which will be used to manage the router (login) in the future.

Step 3: After logging in successfully, the router will automatically detect the Internet access mode. Please fill in the corresponding online mode parameters according to the detected online mode. Please carefully check whether the broadband user name and password entered are correct, and pay attention to distinguish between Chinese and English, whether the letters are uppercase or lowercase, and whether the suffix is complete. If not, please consult the broadband operator, as shown in the figure below;

Step 4: Set wireless parameters, as shown in the following figure;

Matters needing attention

It is recommended to set the wireless name to letters or numbers, and try not to use Chinese or special characters, so as to avoid that some wireless clients do not support Chinese or special characters, which may lead to search failure or connection failure.

In order to ensure your network security, it is recommended to set a wireless password to prevent others from accessing the Internet illegally.

Step 5: Finally, you can see the prompt that the setting is complete. After clicking Finish, the router will automatically restart, as shown in the following figure after the above configuration.

Step 6: Wait 1-2 minutes. After the router works normally, the computer will automatically "request" the IP address from the router, and the router will assign parameters to the computer after receiving the request. Right-click the small computer icon in the lower right corner of the computer-open the network enjoyment center-click the local connection-details-and you can see the parameters obtained by the computer (generally, after seeing the IP address, you will have specific parameters instead of 0.0.0), as shown below;

Finally, open the browser and you can surf the Internet normally.