The second floor is arranged in a big hotel downtown. When the call came, we asked several people on the first floor to contact each other and take a taxi together. They reimburse the round-trip fare, and the second floor belongs to our department, so we knock on the door one by one to make an appointment. The next morning, everyone went out in suits and ties, arrived at the foot of Xishan, found a car and went all the way to the hotel.
When getting off the bus, a doorman whose height is close to 1.9 meters came to open the door, and four men in suits and ties were crowded in a taxi. . . It's cold to think about it. After entering the hotel, I found it really different. The people inside look rich. I have never been to a five-star hotel before, so I feel a little embarrassed. People from the company live on the fourth floor of/kloc-0. We arrived more than half an hour early. There are many sofas in the hall, but there are waiters waiting beside them. In order to avoid trouble, we go directly to 14 floor. After getting out of the elevator, I was at a loss for a while. I can't find the room. The cleaner in the corridor knocked at the door and shouted "housekeeper!" . Five minutes later, we discussed the problem. It seems impolite to be too early than the appointed time, so we are going to go downstairs and come back for a while. Just entering the elevator, before pressing the button, HR of a company came out of a room and stopped us and asked, "Where are you going?" At that time, I was sweating profusely and thought our behavior was quite idiotic, but I explained it a little. HR didn't say anything either. Wait in his room first.
Then I was at a loss and fidgeted in my room for half an hour. The scenery on the14th floor was good. I took the opportunity to sneak out my IXUS 800 and took some pictures of tall buildings. It feels really good to be condescending from the city, and I immediately secretly vowed to buy the first house in the future in a high-rise apartment! After waiting for about 20 minutes, HR, who is in charge of mechanical major, came in and called us to his room for an interview, so we waited. After a long 45 minutes, my classmates came back for an interview with me.
I found the room with a limp. HR was sitting inside, the door was wide open, so I didn't knock. HR saw me come in and motioned me to sit in the chair in front of him, so I sat down. This time, HR spoke first and said, "There are no other questions today, just talking about some details. Let me see your resume. Ah, you passed CET-6, and your grades are not bad. Will there be a sense of loss when you come to a Japanese company? " I thought about it and said, "actually, I don't think it's a loss." English is a worldwide language. I think as long as it is an international company, knowing English always has advantages and significance. " He smiled and said, "But our company really seldom uses it. We are a Japanese company and some of our employees are Japanese. Their English is very poor. " I said, "For me, English is already a source of thinking. I usually like to watch original movies and English TV series. I think English is more of a thinking tool than an advantage in finding a job. If I don't have many opportunities to use English in the future, I won't give up learning English. " He nodded and continued to ask, "What is the content of your graduation project?" I said, "We won't start our graduation project until next semester. We haven't started to assign topics yet. Only some courses have been designed. " . "What is the curriculum design? Let's talk about your design. " "Now we have completed the course design of mechanical design, and our design task is' reducer'." "Let's talk about it, how to design gears, how to design boxes, and what technical details should we pay attention to?" I thought for a moment and said, "First of all, the gears should be designed preliminarily according to the working conditions. The most important factor is the transmission ratio, which is determined by deceleration. The transmission ratio in the gearbox I designed is 5: 1. From this ratio, the primary diameters and materials of two pairs of gears can be calculated, and the parameters of the shaft can be calculated from the technical parameters of the gears. The tooth height needs to be determined comprehensively according to the oil immersion height in the box and the gear parameters. Box parameters are determined by the empirical formulas of shaft and gear, and so on. In addition, the cooperation between shaft and bearing, the displacement of gear and the design of tank are all very important technical details. After each design is completed, the design parameters must be accurately checked, which is basically the design process. " He nodded and asked, "How is cooperation determined?" I replied: "It should be determined according to the running state and requirements of the parts in actual work. There are some simple principles, such as interference fit, transition fit and clearance fit. For bearings, the inner ring needs to use the base hole system, and the outer ring needs to use the base shaft system. Because bearings are standard parts, all fittings must be adapted to standard parts as much as possible. " After answering, I feel that my answer is a bit too general, but I can't answer pasta in detail, so wait. He looked down at my resume and asked, "Have you ever worked in Electronic City? What job have you done? " So I made a statement about my work, which was somewhat exaggerated, but basically true. After listening to this, HR said, "Not bad, but this time we are recruiting technicians, and your sales experience may not be useful." I ft for a moment, calmed down and said, "My sales experience is just some simple experience, not a core advantage, but in this process, I got the exercise of communicating with people, which I think is the biggest gain of my part-time job." He smiled and asked, "What do you think? Who is the best and why? " I thought for a moment. If others are the best, I may leave HR with no confidence. If I am the best, then I am too shameless and arrogant, so I decided to avoid the question and said, "I think the four of us have their own advantages and disadvantages, because I am not in the same class as the three of them, so I don't know enough about them, as far as I know." The results are also the best among the four of us, while B is talkative, cheerful and has good interpersonal skills. C is a national defense student, influenced by the special training system, and has a tough and upright character. He must be the most diligent employee in his work. I think I am a compound talent with wide knowledge, good communication skills and strong innovation ability. " In fact, I didn't answer his question at all, but HR usually doesn't ask questions at this time. Sure enough, he asked me, "well, because our schedule is very tight, we must sign people in Dagong tomorrow." If I sign a contract with you tomorrow, can you sign it? " I am hesitant about this question, because attending this interview is just a temporary idea, and my family doesn't know it at all. I'm afraid I was too hasty in signing the contract. I asked tentatively, "Do I have to sign it tomorrow?" Can't you give some time to think about it? "HR shook his head and said," time is tight. We will fly to the next city tomorrow night, so we will get an answer by tomorrow morning at the latest. " I hesitated, so I had to say, "I'm afraid I have difficulty in that situation." I ask you to understand how much we value our first job as a senior, and my parents' feelings are also very important. I must ask their advice. " He nodded and said, "I understand you. I came from that time, but time is really tight now." Please also think about the company. You four must be careful. As soon as I heard it, I thought there might be a play, so I said, "Well, I'll go back and discuss it with my parents." HR asked me to ask some questions about their company, so I asked a thorough question about future career development, overseas study opportunities, specific job content and treatment, and HR answered them one by one. After asking, I jokingly asked, "Will there be a discount for company employees to buy cameras, huh?" HR also smiled and said, "Yes, it's at least cheaper than the market 100, but we all use it. I smiled. HR picked up the camera on the desktop and asked, "Do you mind if I take a picture of you? Because I have to sort out some information when I go back, it is more convenient to have photos. "I said I didn't mind, then I changed my smile and the light flashed. HR got up, stretched out his hand and shook my hand, and said, Go back and think about it. Today's interview is over Thank you for coming!
So I went out of the room to find the next classmate.
At 6 o'clock that night, HR called to say that I was hired. If there are no questions, please answer them as soon as possible whether they can sign the contract. Hehe, I got a job opportunity in my life ~