According to the data of CBI Construction Network, the total length of the capacity expansion and reconstruction project from Chongqing to Changzhou expressway is 53.265 kilometers, and the design speed is increased from the current 80 kilometers to 100 kilometers, with a total investment of 8.908 billion yuan. Service area 1, 9 interchanges, 6 ramp toll stations, 65 bridges and 2 tunnels. August 20 16, the capacity expansion and reconstruction project from Chongqing to Changzhou expressway was approved. The capacity expansion and reconstruction project is expected to start on 20 16 and be completed by the end of 20 19.
Chongqing to Changchun expressway-Basic Information
The starting point of Yuchang Expressway is Shangqiao in Shapingba District, and the end point is Taohua Street in Changshou District, with a total length of 85 kilometers. 1997 started construction, and the whole line was completed and opened to traffic on April 28, 2000. Among them, 33 kilometers from Shangqiao to Tangjiatuo (the outer ring section of the city) is six lanes, and the rest are four lanes. Chongqing-expressway is a section of expressway 79 18, Shanghai-Chongqing-expressway.
The first expressway Chongqing (Chongqing)-Changshou expressway, which was built after Chongqing was directly under the central government, was completed and opened to traffic, and the Chengdu-Chongqing Expressway extended eastward by 85.5 kilometers.
The total investment from Chongqing to Changzhou expressway is more than 3 billion yuan, which is the most difficult section of the trunk highway along the Yangtze River between Chengdu and Chongqing, and the first expressway leading to the Three Gorges reservoir area in the main city of Chongqing. The whole line is designed according to the standards of mountainous and hilly areas in expressway. One-way length exceeds 1.5km, with 23 large bridges, 43 medium bridges and 2 tunnels. The whole process is fully enclosed and the designed driving speed is 80 km/h.
Capacity expansion and reconstruction project in expressway, Chongqing.
August 20 16, the capacity expansion and reconstruction project from Chongqing to Changzhou expressway was approved. After capacity expansion, it was upgraded to two-way six lanes, and the design speed was increased to 100 km. There will also be 1 service area, 9 interchanges, 6 ramp toll stations, 65 bridges and 2 tunnels.
According to the approval document, the route of expressway capacity expansion and reconstruction project of Chongqing-Changchun starts from expressway, the former Chongqing-Changchun in Fu Sheng Town, Jiangbei District, connects with expressway around the city, passes through Mingyue Mountain to Wubao Town, Jiangbei District, and passes through Yulin River to Jiantuo Bay. Jiantuowan Hub Interchange is connected with Hechuan-Changshou Section of Third Ring Expressway and Nanchuan-Liangjiang New Area Expressway, and Sanlinqiao Hub Interchange is connected with Yuchang Expressway. Shaxi Hub is set in the northeast, which is connected with expressway and G3 19 in Chongqing via Luo Qi Town, passes through Chongqing-Wan and Chongqing-Lichuan Railways, and reaches Baxhu Town along the eastern foot of Mingyue Mountain. Changshou North Hub is set along the northern part of Changshou urban planning area, and is connected with the beam section of expressway in Shanghai and Chongqing.
The capacity expansion and reconstruction project from Chongqing to Changzhou expressway is expected to start on June 20/KLOC-0 and be completed by the end of October 20 19.
The above is the introduction of Zhong Da Consulting to Chongqing-Changzhou Expressway. For more information about expressways, please pay attention to the architectural knowledge column of Zhong Da Consulting.
For more exclusive information about the construction industry, please pay attention to the micro-signal of the construction network in real time.
For more information about bid writing and improving the winning rate, click on the bottom customer service for free consultation.