1, first power on the wireless router, connect the network cable of the LAN port of the wireless router to the computer, and automatically obtain the IP address and DNS settings of the local connection;
2. Enter: melogin.cn in the computer browser? , you can open the router login interface->; Enter the correct login password to enter the setting interface of Mercury mw3 10r, as shown in the figure below.
3. On the settings page of Mercury mw3 10r, click Advanced Settings? ——& gt； ? Wireless settings? ——& gt； ? Host network? Turn on these three options, and you can reset the wireless password (wifi password) in the opened page, as shown in the following figure.
4. If you want to prevent wifi from being hacked by others, you'd better use a wireless password: uppercase letters+lowercase letters+numbers+symbols? Settings, and the length of the password should be greater than 8 digits.
5.2.4G wireless mode can be mixed and matched with 1 1b/g/n, and 2.5G wireless mode can be mixed and matched with 1 1a/n/ac, and the channel can be selected automatically with a bandwidth of 20/40MHz.
6. Finally, click Save to restart the router and complete the setup.