"Planning" is divided into two parts: one is the design of the pattern, and the other is the understanding of the pattern. The design is to decorate patterns for customers, and at the same time, we should consider the long-term development and future improvement of patterns, because tattoos are a recognition of their own bodies and have continuity.
Correct secant after synthesis.
Fogging-some people tear the color from the inside out, making a fog at the beginning and a light fog at the end. Some people start making dense fog by spiraling from the inside out, and the other way is to go back and forth like the nozzle of a printer and gradually develop outward. At the beginning, the place is heavier, and the power gradually becomes lighter, which can also form a fog similar to a gradient layer. Carefully adjust the length of the tattoo machine needle, because the length of the needle determines the thickness of the line.
Precautions:
Excessive adjustment should be avoided.
1. If the needle is too shallow, the pigment will dissolve in the blood and spread, resulting in a situation commonly known as "opening muddy".
2. If the needle is inserted too deeply, it is easy to damage the dermis and cause scars. Therefore, it is suggested that the penetration depth of tattoo machine should be within1mm.. The secant angle should not exceed 20℃, because if the included angle is too large, the lines will be muddy in the case of needles, and the angle perpendicular to the skin of the lower needle is the easiest to color. When cutting lines with transfer printing, we should pay attention to the order of cutting lines, and do it in the order of "from bottom to top, from right to left", because it will not be easy to rub flowers and transfer patterns.