① Download the new sweet potato software in official website.
(2) USB flash drive with capacity greater than 4G and can be used normally.
Specific steps:
1. Double-click to open the startup disk making tool of sweet potato usb flash drive, select "Smart Mode" in the lower left window, and then insert the prepared USB flash drive into the USB interface of the computer, and the sweet potato will automatically recognize the USB flash drive. Click the drop-down menu next to Start Production, and select the related production mode in the column of U disk partition, as shown in the figure below:
2. After we click "Start Production", a warning window will pop up: "This operation will delete all data and cannot be recovered". If there is important data on the USB flash drive, we need to back it up. After confirming that the backup has been completed or there is no important data to clear, we click OK. If the user chooses lossless production, a warning window "Lossless production is risky, and the data on the U disk cannot be completely guaranteed" will pop up, as shown in the figure below:
3. Then start making USB flash drives. The whole process depends on the situation, ranging from two to five minutes, as shown in the figure:
4. After the USB flash drive startup disk is made, a sweet potato message prompt window will pop up: "USB flash drive started successfully. Do you want to test the startup of the U disk with simulated startup? " Let's click Yes to test whether the finished USB flash drive startup disk is available.
5. If you see the normal startup interface of the U disk startup disk in the simulation environment, it means that the U disk startup disk has been successfully made (note: the simulation startup interface is only for testing, please do not operate further). Finally, press the key combination "Ctrl+Alt" to release the mouse, and click the close icon in the upper right corner to exit the simulation interface, as shown in the figure below:
Reference tutorial: /dfsjc/875.html