1. Turn on the vehicle: start the engine of Hanteng X7 and let the vehicle run.
2. Stop and keep the vehicle stationary: find a safe parking lot or an open place to ensure that the vehicle is in a completely stationary state. Tighten the parking brake.
3. Find the steering gear adjusting device: In the engine compartment or bottom of the Han Teng X7, you may find a steering gear adjusting component similar to a screw or adjusting device.
4. Loosen the adjusting device: use a suitable tool (such as a wrench or torque wrench) to loosen the adjusting device of the steering gear. Please loosen it as needed.
5. Adjust the steering wheel: Once the adjustment device is released, you can try to turn the steering wheel and observe the required adjustment effect. You can adjust the position of the steering wheel clockwise or counterclockwise to change the sensitivity and positioning of the steering gear.
6. Lock the adjusting device: After the adjustment result is satisfactory, make sure to lock the adjusting device of the steering gear to the appropriate position again. This will fix the adjustment state of the steering gear to ensure stability.
Please note: the steering gear needs to be adjusted carefully, so as to avoid excessive looseness or excessive adjustment that may lead to vehicle handling problems or safety hazards. If you are not sure how to adjust the steering gear, it is recommended that you consult Hanteng authorized maintenance center or professional technicians to make relevant adjustments.
In addition, the steering performance and safety of your Hanteng X7 can be guaranteed by regularly checking the state and function of the steering gear and maintaining it according to the maintenance plan recommended by the manufacturer.