Who can make holes in the wall? how much is it? How to make a hole in the wall?

When the house is decorated, it may be necessary to hang some decorations on the wall, such as decorative paintings, decorative ornaments, or clocks and other items. These all need to be punched in the wall, and the owner can't punch holes himself, which involves the question of who to call. Actually, the decorator can make holes. Next, let's learn about the people who punch holes in the wall, how much it costs to punch holes in the wall and how to punch holes in the wall. I hope I can help you.

First, who wants to punch holes in the wall?

1. If you want to punch holes in the wall, you can find a professional decoration company. Decoration masters usually have punching tools, or find a master who installs doors. They also have punching tools.

2. If the owner wants to make a smaller hole ratio, he can also buy an electric drill to punch holes in the wall himself, but if he has never used an electric drill, this method should be used with caution.

Second, how much is a hole in the wall?

1, punching holes on the wall, the holes are big or small, and different punching tools are needed for punching holes on different walls. In addition, the charging standards for punching holes in different regions are different.

2. The average charging standard for punching in China is: one for dry punching in 50 yuan and one for water punching in 20 yuan. This hole is about the same size as the air conditioning hole.

3. The average charging standard for punching holes in concrete walls is probably one for dry flushing in 80 yuan and one for water flushing in 50 yuan. Punching holes in concrete walls is time-consuming and laborious, so it is expensive.

4. The average charge for drilling holes in cement walls is probably one for dry drilling in 40 yuan and one for rhinestone drilling in 20 yuan. Cement walls are rare in modern buildings.

Third, how to punch holes in the wall?

1. If diamond is used to drill holes, it is necessary to spread a plastic film on the wall and ground below the drilling position, so that water and dust during drilling with diamond will not pollute the wall and ground.

2. That depends on the drill bit. The choice of drill bit depends on the size of expansion screw. The diameter of the hole should be smaller than the diameter of the drill bit. Then, aim the drill vertically at the wall, hold the electric drill tightly with both hands, turn on the power supply and start drilling.

3. When drilling, pay attention to insert the drill bit back and forth, otherwise the dry powder may get stuck in the drill bit. Sometimes, in order to pursue speed, workers will omit this step, which will cause the bit to get stuck.

4. Don't be eager for success when drilling. Pay attention when drilling. If you can't get in or slow down, take out the drill bit in time for inspection, otherwise the core may drill into the borehole wall.

5. If you want to drill a larger hole, you should find a professional punch master to punch it. If the construction personnel are not professional enough, the wall may be damaged and accidents may occur, because the use of drills pays attention to strength and skill. If you can't grasp it, it is likely to hurt users.

The above is about who to call when punching a hole in the wall, how much is a hole in the wall and how to punch a hole in the wall. Thank you for reading. If you want to know more about punching holes in the wall, please stay tuned.