What should be paid attention to in the installation of ventilation and smoke exhaust skylight in factory building?

1, installation layout. In order to ensure the use effect of skylight for lighting, smoke exhaust and ventilation, a reasonable skylight layout will be designed according to the use scene of the factory and the local climate conditions to ensure the use demand of the factory. Some roof smoke exhaust skylights are vertically arranged, that is, installed at the roof ridge; However, the skylights of some factories are arranged horizontally, that is, perpendicular to the roof and installed along the slope. Therefore, when laying roof panels, holes should be reserved and roof ventilation skylights should be installed in strict accordance with the design drawings.

2. Protection of anticorrosive coating. The manufacturer of electric smoke exhaust skylight has made corresponding anti-corrosion treatment for the profile during production to ensure that the roof electric skylight will not be damaged by rain, gas and other substances in the later use. Therefore, the installation team should pay attention to the protection of anti-corrosion coating when installing the smoke exhaust and ventilation skylight.

3, the installation is firm. During installation, it is necessary to ensure that the smoke exhaust skylight of the factory building is firmly installed and does not cause potential safety hazards. The joint between the factory skylight and the base should be fixed in place to ensure the safe and stable operation of the factory skylight under the local maximum wind, rain and snow load.