The purpose of installing win 10 system on the USB flash drive is to make the USB flash drive a startup USB flash drive for win 10 system.
Prepare:
1. Download the new sweet potato software from official website (directly from the attachment).
2. A USB flash drive with a capacity greater than 4G that can be used normally.
3. Download the win 10 system file.
Specific steps:
Step one:
Double-click to open the sweet potato U disk startup disk making tool, select "Smart Mode" in the lower left window, and then insert the prepared U disk into the usb interface of the computer. Sweet potato will automatically identify the U disk. Click the drop-down menu next to "Start making" and select the mode related to the column "U disk partition".
Step two:
After we click "Start Production", a warning window will pop up: "This operation will delete all data, which is irreversible". If there is important data on the USB flash drive, we need to back it up. After confirming that the backup has been completed or there is no important data to clear, we click OK. If the user chooses lossless production, a warning window "Lossless production is risky, and the data on the USB flash drive cannot be completely guaranteed" will pop up.
Step 3:
Then start making USB flash drive startup disk. The whole process depends, ranging from two to five minutes.
Step 4:
After the USB flash drive startup disk is made, a sweet potato message prompt window will pop up: "USB flash drive started successfully. Do you want to test the startup of the U disk with simulated startup? " We click "Yes" to test whether the finished USB boot disk is available.
Step five:
If you see the normal startup interface of the U disk startup disk in the simulation environment, it means that the U disk startup disk has been successfully made (note: the simulation startup interface is only for testing, please do not operate further). Finally, press the key combination "Ctrl+Alt" to release the mouse, and click the close icon in the upper right corner to exit the simulation interface.
Step 6: Put the win 10 system file into the USB flash drive, and the USB flash drive will become a USB flash drive. Just set the computer to boot from the USB flash drive.