What if the gas stove is not ventilated?

Vendors of gas stoves had better come and see. Now that the gas stoves are packed and installed, you can pay the money after debugging. \x0d\ If you want to find out for yourself, you should try to find out the reasons from these aspects. \x0d\ Reasons for non-combustion of gas stove: \ x0d \ x0d \ 1. If the gas stove doesn't catch fire, first check whether there is gas, and if not, add gas. \x0d\\x0d\2。 Is the battery charged? When it is found that the ignition is not bright, it is necessary to check whether the battery is charged. If it doesn't work, replace it with an ordinary 1 battery. \x0d\\x0d\3。 Poor circuit contact, mainly to check whether there is rust on the positive and negative poles of the battery box and whether there is poor circuit contact. If there is, it is necessary to remove rust and connect the wires accurately. \ x0d \ x0d \ 4。 Overvoltage protection. Many gas stoves have overvoltage protection function. Once it is over-pressurized, it cannot be started. At this time, it is necessary to try the pressure reducing valve. \x0d\ This happens frequently. The gas stove my family bought didn't use natural gas at first, but used gas; There's always a situation where you call for a while and you can't call for a while. I called the installer several times. They said that the main reason was uneven gas pressure, and the safety protection measures to prevent gas leakage in the furnace locked the valve; Just switch to natural gas in the future, and the pressure of natural gas will be more uniform. I didn't believe it at first, but it never happened again when I switched to natural gas. \x0d\\x0d\5。 The pipe is blocked. Once the pipeline is blocked, check the air valve. Generally speaking, if you can smell the gas and the gas stove doesn't catch fire, it is probably that the gas is blocked. At this time, it is necessary to clear the pipeline. \ x0d \ x0d \ 6。 The micro switch is damaged, which is a small place of the gas stove, but it is more difficult to repair than usual. Generally speaking, it is not recommended for car owners to repair themselves. This kind of fine and professional work is best solved by professionals. \x0d\\x0d\7。 The ignition needle is dirty, and the kitchen is easy to be dirty, especially easy to be polluted by oil pollution. If the gas stove is left for too long, the ignition needle is easily polluted by oil. At this time, it is necessary to clean up the oil on the ignition needle and then try to ignite it. \x0d\\x0d\8。 If the ignition needle is not positioned properly, the gas stove needs the distance between the ignition needle and the fire cover. Once the distance deviates too much, the gas stove will not catch fire. Generally speaking, the distance between the ignition needle and the fire cover is 4-6mm, which should be aimed at the fire hole. \ x0d \ x0d \ I wish you a happy life! ! !