Lao Lu takes you to talk about cars.
The response time is 10 minute.
Ask a question
Honey, it's an honor to answer your question. The information that the teacher found here is: the installation steps of changing the horn of the car: 1. Look for the horn first, which may be under the hood of the car, around the battery, or between the inside and outside of the fender; 2. Disconnect the power supply of the car, unscrew the small bolt fixing the horn, remove the horn, and then replace it with a horn bought from the auto parts dealer or after-sales repair shop; 3. Install the horn to its original position and connect the connecting cable to the car battery. If possible, install the universal horn, or use self-tapping screws to install it in a suitable position. Finally, turn on the car power and check the sound effect of the car horn.
2022- 10-08 consultation record and answer.
2 1 How to change the original car horn of Geely Borui?
Dear, it's my pleasure to answer your question ~ The information that the teacher found here is: the installation steps of changing the horn of a car: 1. Look for the horn first, which may be under the hood of the car, around the battery, or between the inside and outside of the fender; 2. Disconnect the power supply of the car, unscrew the small bolt fixing the horn, remove the horn, and then replace it with a horn bought from the auto parts dealer or after-sales repair shop; 3. Install the horn to its original position and connect the connecting cable to the car battery. If possible, install the universal horn, or use self-tapping screws to install it in a suitable position. Finally, turn on the car power and check the sound effect of the car horn.
The following is related development, I hope it will help you: the negative pole of the pentatonic speaker can be connected to the original speaker at will, and one of the positive poles is connected to the original speaker (in parallel with the original speaker). As long as you press the speaker, you will hear the sound of the pentatonic speaker (according to the regulations, this kind of speaker is not allowed to be installed. If you are afraid of being caught by the traffic police, don't connect the positive pole of the original speaker. The other two speakers can be directly connected with batteries (this is easy to cause). If your original speaker is two wires, just connect it casually. If it is a thread, add a wire. When the horn is fixed, see if it will touch here and there. Not if you're around. Remember that the horn should be facing down. If it is rising, it will break easily when it enters the water.