Time flies, and in a blink of an eye, we will usher in a new year. During this year, our working ability and experience have been improved. At this time, how can the most critical year-end summary fall! The year-end summary is your chance for promotion and salary increase. This is my annual work summary, I hope it will help you.
Inspector's annual work summary 1 In a blink of an eye, time flies, like a blank, xx can turn back again, but never come again, because a new page is about to turn. Looking back on these days in China Telecom, I have gained and lost. All kinds of facts and emotions are intertwined, which has fixed my present situation. Now I'll sum up from two aspects, work and personal, as follows:
I. Work aspects
1, working order
First of all, with a grateful heart, I would like to thank the company for giving me a platform to exercise myself, and all my colleagues in the leadership and acceptance department. It is because of your selfless help and tolerance that I have come to this day smoothly.
2. Work mood
It is my honor to be a member of the acceptance center, and I also feel a great responsibility. We are responsible for the management, acceptance and supervision of company assets. Our temporary negligence, carelessness, relaxation and satisfaction are undoubtedly the root causes of the company's huge economic losses and image losses. In the face of complicated interpersonal communication, I always use this sentence as my motto to warn myself: "I can undress in private, but I must wear armor at work."
3. Work summary
In the past year's work, through the complete work flow and extensive interpersonal communication, I have gained rich exercise and risen to a new height, which is worthy of recognition. But there are also many shortcomings, mainly as follows:
1) Our optical cable cannot be identified quickly and clearly in the actual acceptance process;
2) There is no clear control over the whole project; 3. There is too little knowledge involved in the work;
4) Know too little about other departments of the company;
5) Not careful enough to review the data and fill in the acceptance report;
6) The work arrangement of distributing materials in one month is unreasonable, and Nissin Day will never end.
7) Make the same mistake often.
In view of the above problems, in the work of next year, I put forward the following requirements:
1) stick to the principle. Strengthen the study and accumulation of professional knowledge and do a good job;
2) Carry forward the spirit of "seriousness". And runs through the whole work.
3) Improve your comprehensive ability in an all-round way and let yourself get further development.
4. Working face
In the new year, I will do a better job in the following aspects: a, obey the arrangement of the leader and complete the tasks assigned by the leader on time and with good quality; B, study hard all kinds of professional knowledge to improve their work level; C, adhere to the working principles and deepen personal dignity; D, correct attitude, dare to challenge pressure; D, insist on proceeding from reality, and then practice.
5. Work suggestion
Second, strengthen the construction of departmental cohesion.
I don't think anyone can be responsible for the merits and demerits of the acceptance center. Every month we have our own independent task. In the face of difficulties and problems, we should unite as one, twist into a rope, gather wisdom and overcome difficulties. Therefore, I suggest organizing regular training to cultivate the team's ability to deal with and solve problems, enhance the sense of honor of the department and strengthen team building.
Third, organize practical training.
From the analysis of the problems encountered in the current work, there are still many practical acceptance and process problems. For example, the acceptance process is systematized, the completion report and construction technology are further standardized, the route of entering the building is falsely reported, and the design sketch deviates greatly from the completed route map, which are usually ignored and need to be changed. It must be studied and discussed in detail and repeatedly. Come up with a good idea.
Summary of Inspector's Annual Work 2 I. Overview of the Project
The production business building of Wuling Waterway Management Office is located in Wuling Town, Wanzhou District, Chongqing. Construction unit: Yangtze River Wanzhou Waterway Management Office; Design unit: Chongqing Wanzhou District Industrial Architecture Design Institute; Survey unit: Sichuan West Sichuan Geological Engineering Survey Institute; Supervision unit: Chongqing Kaihong Engineering Consulting Co., Ltd.; Construction unit: Chongqing Li Guan Construction Group Co., Ltd., and the number of floors of this project is 3F. Building area 1490 438+02m2, frame structure.
The foundation form of this project is manual digging pile. According to the geological survey data, the bearing stratum is moderately weathered mudstone, and the standard value of natural uniaxial compressive strength of moderately weathered mudstone is frc= 10.84MPa. The design safety grade of the foundation of this project is Grade II, and the design grade of the foundation is Grade C. The concrete grade of pile caps, piles and foundation beams is C30.
The foundation of this project was excavated in 20xx1October 24th 10, and the pile foundation was inspected and accepted on October 29th/kloc-0, then the reinforcing cage was installed and concrete was poured, which was completed on February 2nd 165438. 65438+February 65438+June for dynamic testing of pile foundation. On February 22, 65438, the ground beam reinforcement was installed. The representatives of quality inspection supervision, Party A, supervision and construction inspected, and the ground beam concrete was poured on February 25th, 65438.
Second, check the situation
Core compressive strength is reported in two groups, and the results meet the requirements. Φ 8 ~ Φ 25 parent metal * * * steel was submitted to 9 groups for inspection, and it passed the re-inspection.
Seven groups of steel bar welding process tests and two groups of foundations were submitted for inspection, and the re-inspection results were qualified.
Concrete: 24 groups of C30 pile core concrete are submitted for inspection, and the pile caps and foundation beams are submitted for inspection 1 group. It hasn't been sent for inspection yet because it hasn't been 28 days.
20xx 12 16, 24 piles are tested by low strain reflected wave method, 1 pile is Class II, and the rest are Class I piles.
Three. Implementation of engineering quality laws, regulations and construction standards
This project is carried out in strict accordance with relevant national laws and regulations, Unified Standard for Acceptance of Construction Quality of Building Engineering (GB50300-20xx) and relevant specifications.
Four. Scope, content and results of self-inspection.
The foundation and foundation division self-inspection, * * * self-inspection concrete pouring pile, earthwork excavation, formwork, steel bar, concrete, cast-in-place structure and other seven subdivisional work, * * * 8 inspection lots. The acceptance basis is Code for Acceptance of Construction Quality of Building Foundation Engineering (GB50202-20xx). After inspection, all the main control items are qualified, and the general items meet the specification requirements.
Five, since the project started, my unit in strict accordance with the design, construction specifications, mandatory provisions and the relevant provisions of the project.
The acceptance standard of construction quality and engineering quality are always regarded as the focus of daily management of the project department. After the completion of each working procedure, the construction of the next working procedure shall be carried out after self-inspection and mutual inspection are reported to the supervisor and the owner for acceptance. In the process of construction, full-time quality inspectors and builders will guide and supervise, rework unqualified sub-items on the spot, and eliminate any possible quality hidden dangers in the bud. During the construction of this project, no quality problems and quality accidents occurred. The test report is complete and all qualified. All divisions and subdivisional work are qualified in inspection. The quality of the project meets the design and specification requirements, and the project has no quality defects.
Six, key parts, important working procedures, main construction materials in the process of construction quality control measures.
By controlling the elevation and axis of the project, the elevation error of the project is within 65438±0cm and the axis error is within 5.
In the construction of the project, our unit pays close attention to the quality of the project and adheres to the policy of "quality first". According to the characteristics of this project, the project quality plan is prepared, the quality objectives are defined, the whole project is fully controlled, the quality assurance system is established, and a quality leading group with the project manager as the team leader and the deputy manager and technical director as the deputy team leader is established to be responsible for the quality management and supervision of this project. The construction of each working procedure is not clear, and the next working procedure is not connected. Each working procedure is qualified by our quality inspector and reported to the supervision engineer and the owner's on-site representative for acceptance before entering the next working procedure. Before the start of each working procedure, technical disclosure shall be made by professional technicians, and the key parts and important working procedures in the project shall be supervised by full-time quality inspectors and supervisors or site representatives of the owner to ensure the construction quality. Before the foundation concealed works are transferred to the next working procedure, they shall be inspected and accepted by the supervision engineer and supervision department. The acceptance of key parts, important working procedures and subdivisional work shall be carried out by the owner, supervision, design, geological prospecting, quality supervision and other departments, and then the next working procedure shall be carried out in strict accordance with relevant specifications. In terms of raw materials, adhere to the use of qualified products from regular manufacturers, so that raw materials must be inspected before use, and a material account should be kept so that the parts where materials are used can be traced back to plasticity. Unqualified products are not allowed to enter the construction site to ensure that all materials used in the project are qualified. The raw materials and semi-finished products used in this project are qualified, and the information is basically complete. The foundation of this project is safe and reliable, and the foundation division has passed the evaluation.
In the process of engineering construction, there are still some shortcomings in our project department, such as how to effectively protect finished products and prevent and put an end to uncivilized behavior in the construction site. , need to constantly improve and perfect in the future work. At the same time, we sincerely hope that through this acceptance, we can put forward guiding opinions and promote us to do better in our future work.
Annual work summary, inspector, quietly left in 20xx. In the past year, I have gained a lot, from a person who doesn't know how to do things seriously to a serious, active, practical and patient person. The company taught me to deal with problems calmly and patiently, communicate problems I don't understand in time, come up with ways to deal with common mistakes and put them into practice.
Because quality work is closely linked, there is no room for any mistakes, so we must ensure quality first and ensure the safety of consumers' medication. Ensure the accuracy of each step. Therefore, in the coming year, I will focus on the details of the minimum packaging acceptance of drugs, seriously study the drug quality management standards, cherish the learning opportunities of every training and examination, carefully plan the detailed work flow, and strictly implement it. Check the delivery note with the inner and outer boxes of drugs one by one, including product name, batch number, specification, supplier, characteristics, etc. , and do a good job of collecting reports, ensure the quality of drugs and the accuracy of storage, be familiar with the packaging of drugs and the area where each receiving address belongs, learn to scan and upload electronic supervision codes, and be familiar with the company's system, which is convenient for doing a good job.
Admittedly, I made many mistakes in my work, and there are also many places to pay attention to in delivery and acceptance. I am busy with my daily work, but my own mistakes will affect the operation of the company and the impression of customers on the company, and the economic losses can be recovered. However, the company's reputation is built on the dedication of every employee. In the work, the mistakes found can not be reflected to the next step in time and careless workflow will lead to mistakes. Therefore, it is very important to strengthen communication with colleagues in various departments. We can't let the problem be postponed because of special circumstances, and we can't escape the working principle because of human relations.
In my spare time, I will spare some time to strengthen the study of pharmacy knowledge, make up for my shortcomings in pharmacy, learn the operation of office software and office equipment to improve office efficiency, and devote myself to my work as much as possible, so as to become a pharmacist during my four years in college and do my part for the development of the company and the pharmaceutical industry.
In the early stage of the fourth annual work summary, because it is the peak season for the sale of veterinary drugs and fish drugs, some veterinary drug enterprises have a wait-and-see idea. Therefore, the transition from veterinary drug enterprises in our town to GSP is slow. In order to speed up the progress of GSP inspection and acceptance of veterinary drug enterprises in our town, we have increased the publicity of implementing laws and regulations on veterinary drug GSP, strengthened the inspection and supervision, and strengthened the self-construction of veterinary drug GSP inspectors, striving to improve inspection skills and acceptance efficiency. Accelerate the implementation of veterinary drug GSP in our town and standardize the management behavior of veterinary drugs.
First, strive to improve the professional quality of GSP inspectors.
In Guangdong Province's GSP inspection and acceptance evaluation standard, the contents of on-site inspection and evaluation are: institutions and personnel, places and facilities, rules and regulations, procurement and storage, display and storage, sales and transportation, after-sales service and other seven aspects ***80 items. Important matters (one-vote veto) 15, important matters 16, general matters 49. The evaluation criteria and requirements are: the critical defect requirement is 0; Important defects ≤3; The proportion of bad items in general items is ≤20%. Only by meeting the above requirements can we pass the acceptance.
Because there are many clauses and laws and regulations involved, the work progress is slow. To this end, we have also organized many times to study the Regulations on the Administration of Veterinary Drugs, the Regulations on the Administration of Veterinary Drugs and other laws and regulations, and strived to improve the spirit and accuracy of grasping the acceptance terms. In addition, communicate with each other in the acceptance work and improve each other.
Second, a clear division of labor.
In order to implement the post responsibility system, we have a clear division of labor and the responsibility lies with people. Improve work enthusiasm and enhance work responsibility. Through door-to-door understanding, I found out the situation of veterinary drug enterprises (stores) in our town. The implementation of "easy before difficult" and "divide and rule" has successfully completed the GSP acceptance of veterinary drug enterprises in our town.
Third, strictly enforce the discipline of GSP acceptance of veterinary drugs.
In the on-site inspection and acceptance, the Discipline of Inspection and Acceptance of Veterinary Drugs GSP in Guangdong Province shall be strictly implemented, so as to adhere to principles, be honest and decent, and be polite to guests, so as to make the inspection and acceptance work fair and just.
;