Step 1: Prepare the tools you need.
Some tools, including wrenches and screwdrivers, are needed to remove the rotating shaft of toilet cover, so as to ensure that the required tools are ready before the work can be started.
Step 2: Turn off the water.
Turn off the water source before removing the toilet cover shaft to prevent water from entering the instrument panel, electrical appliances and maintenance personnel.
Step 3: Move the toilet lid.
Remove the toilet lid and put it in a safe place to avoid touching it at work. Pay attention to the degree and angle during this operation, so as to avoid the toilet lid shaft slipping and falling to the ground.
Step 4: Remove the protective shell.
Generally speaking, the rotating shaft of the toilet cover is surrounded by a shell, so it is necessary to remove the protective shell. Depending on the model of the toilet lid shaft, the housing can be fixed by one or more screws.
Step 5: Remove the protective seat.
Under the shell, there will be a round seat to cover the rotating shaft of the toilet cover. This seat is called a protective seat. The protective seat is usually one of the components to adjust the height of the toilet lid. We need to apply slight pressure and twist the protective seat to pull out the toilet seat shaft.
Step 6: Remove the rotating shaft of the toilet cover.
When the protective seat is removed, the rotating shaft of the toilet cover will naturally extend out. We need to gently twist the toilet lid shaft to get out of its determined position and remove it.
Through the above six simple steps, the disassembly of the toilet lid shaft can be completed. It should be noted that if there is no corresponding experience or technology before disassembly, please consult a professional first. At the same time, you need to be very careful when removing the toilet cover shaft to ensure that it will not be damaged.