3 pieces of simplified coal sales contract model

Coal is a modern industry, whether heavy or light; It plays an important role in energy industry, metallurgical industry, chemical industry, machinery industry, textile industry, food industry and transportation industry. How much do you know? The following is a sample coal sales contract that I have compiled for you. Welcome to reading.

Simplified coal sales contract model 1

Party A:

Party B:

After friendly consultation, the two sides reached the following agreement on coal trade based on the principle of equality and mutual benefit:

Article 1 Name and quantity of coal

1. 1 coal name: coal.

1.2 quantity: ten thousand tons

Article 2 Mode of delivery

2. 1 Cash on delivery

2.2 originating station:

2.3 Arrival:

2.4 consignee:

Article 3 Quality requirements

3. 1 Coal quality requirements: The coal provided by Party B shall meet the following requirements put forward by Party A:

The total moisture mt of the received base material is less than or equal to 38.00% t.

The received basic secondary combustion calorific value Qnet, ar ≥3300kcal/kg.

The VaR of the basic volatiles received is ≥ 20.00%.

Total free radical sulfur St, ar ≤ 1.00% received.

3.2 The supplied coal shall not contain any substance that may cause accidental damage to coal unloading facilities, coal pulverizing system and coal-burning equipment.

Article 4 Quantity Determination and Quality Inspection

4. 1 quantity determination

The number of track scales shall prevail.

4.2 Quality inspection

The settlement is based on the results of quality supervision, inspection and test of Wuhai coal products when the coal arrives at the station. If Party B has any objection to the test results, both parties can settle it through consultation.

Article 5 Coal price

5. 1 standard price: refers to the one-vote price including value-added tax in full when the coal quality standard fully meets the requirements. The standard price for Party B to sell coal to Party A is RMB/ton. The price goes with the market, and the specific price is subject to the supplementary contract agreement signed by both parties after consultation.

5.2 Settlement price: refers to the full one-vote price including value-added tax when coal arrives in Hong Kong.

5.3 Basic price

5.3. 1 When the low calorific value Qnet, ar ≥3300kcal/kgjf, it shall be calculated according to the following formula:

Basic price = (actual settlement low calorific value ×0. 104 yuan/megacard) yuan/ton.

5.3.2. When the low calorific value Qnet, ar ≤3300kcal/kgjf, it is calculated according to the following formula: base price = (actual settlement low calorific value× 0.102 yuan/megacard) yuan/ton.

5.4 Quality Adjustment Price

5.4. 1 When 20.00% of basic volatilization is received, the price will be reduced 1%. Less than 1% is calculated in proportion.

Sixth coal payment settlement methods and settlement period:

The settlement methods are bank draft, promissory note, cheque and bank acceptance draft.

Article 7 Liability for breach of contract

7. 1 If Party A and Party B cheat in the sampling and preparation process, the other party has the right to impose any sanctions on the responsible party.

Article 8 Force Majeure

If one party fails to perform the contract due to force majeure factors such as earthquake, lightning, fire, flood and typhoon. The affected party shall immediately notify the other party and actively take remedial measures. Within the scope of force majeure, the parties concerned may be exempted from liability.

Article 9 Settlement of disputes

9. 1 Disputes, corrections or claims arising from inconsistent interpretation, breach of contract or termination of this contract shall be settled by both parties through friendly negotiation. If negotiation fails, a lawsuit shall be brought to the Hongshan District People's Court according to law.

9.2 During the dispute settlement, both parties shall continue to perform other clauses of this contract except the disputed part.

Article 10 Entry into force and time limit

10. 1 This contract shall come into effect after being signed by both parties, and the validity period of the contract shall be from 20 10/0/0/0/0/0/0/0/0/0/2/30 10.

10.2 The place of performance of this contract is Wuhai.

10.3 This contract is made in duplicate, with each party holding one copy.

10.4 For matters not covered in this contract, both parties may sign a supplementary agreement.

Party A (signature): Party B (signature):

Year, month, sun, moon, sun.

Simplification of coal sales contract mode II

Seller: ContractNo.:

Buyer: Signing place:

Signature time:

_ Note: The following are examples.

First, the consignee's name, destination (port), specifications, quality, delivery (delivery) time and quantity.

2. Delivery (delivery) method: port delivery.

Three. Quality and quantity acceptance standards and methods: the sgs inspection results of seaports above quality shall prevail. The quantity is subject to the number of scales in Dalian Port.

4. Coal unit price and implementation period: 4,500 kcal/kg, with closing price including tax of 472 yuan/ton; One-vote settlement, the seller issues 13% VAT invoice.

Verb (abbreviation of verb) payment method and settlement period: 80% of the payment shall be paid before liquidation, and the balance shall be paid within 3 days after the inspection result comes out.

Liability for breach of contract of intransitive verbs: 1. No reward or punishment will be given when the benchmark calorific value is 50kcal/kg. When it exceeds the range of 50kcal/kg, the coal price rises or falls by 0. 1 yuan/ton per card.

Seven. Settlement of contract disputes: if both parties fail to reach an agreement through consultation, they shall bring a lawsuit to the people's court where the buyer is located. -

Buyer: Jiangsu Ligang Electric Power Co., Ltd. ContractNo.: Li Dian [20] No.

Seller: Signing place: Ligang, Jiangyin, Jiangsu.

Signing date: June 20th.

Simplify coal sales contract mode 3

Seller: (hereinafter referred to as Party A)

Buyer: (hereinafter referred to as Party B)

In order to protect the legitimate rights and interests of the Buyer and the Seller, according to the relevant provisions of the Contract Law of People's Republic of China (PRC), the Buyer and the Seller agree to sign this contract through friendly negotiation and abide by it jointly.

1. Name, quantity and price of goods: see the annex.

Second, the quality requirements and technical standards:

Refer to IBM's relevant product technical standards.

III. Receiving Unit (Person):

The seller designates the receiving unit of the goods under this contract as:

Address:

4. Contact person: Fax: Tel:

5. Delivery time, place, method and related expenses:

1, delivery time:

2. Place of delivery:

3. Transportation expenses: borne by Party A.

Total contract amount of intransitive verbs: RMB:

The total contract amount is RMB:

Seven. Payment method and payment term

Within the delivery date, the buyer shall pay the seller the full contract amount, namely, RMB:

8. Acceptance of goods;

Within three days after the delivery of the products, the buyer shall check and accept the quality of the products according to the quality requirements and technical standards agreed by both parties to this contract. If the acceptance is unqualified, it shall immediately raise a written objection to the seller, and provide the seller with the test report of the relevant technical department within three days after raising the written objection. After receiving the objection and test report, the seller shall repair or replace it in time until it is qualified. If the seller fails to receive the objection within three days after the delivery of the product or the inspection report within the specified time limit, the product shall be deemed as qualified.

Nine. Acceptance and objection:

If the buyer designates the receiving unit (person) to receive the goods, the buyer agrees to be responsible for the receiving, rejection and written rejection opinions put forward by the receiving unit.

If the goods are delivered by door-to-door delivery or self-delivery, the receiving unit (person) should check whether the brand, specification, model and quantity of the products meet the contract requirements when delivering the products; Those that meet the requirements of the contract shall be signed by the receiving unit (person). For products that do not meet the requirements of the contract, the buyer may reject them and explain the reasons for rejection in writing. If the products delivered to the door as agreed and rejected by the buyer need to be kept by the buyer, the buyer is responsible for keeping them.

If the goods are delivered by consignment, if the buyer has any objection to the product, specification, model and quantity, he shall submit it to the seller in writing within days from the date of delivery of the product.

If the quality of the product declines due to improper use, storage and maintenance, the buyer shall not raise any objection.

If the above rejection or objection is the responsibility of the seller, it shall be replaced or supplemented by the seller.

X. entry into force and change of the contract:

This contract shall come into effect as of the date of signature and seal by both parties. During the execution of the contract, neither the buyer nor the seller shall change or terminate the contract at will. If one party really needs to change the contract, it must obtain the written consent of the other party and reach an agreement on the change. If both parties fail to reach an agreement on the change, the party proposing the change shall continue to perform according to the contract, otherwise it shall be regarded as a breach of contract.

Thirteen. Settlement of disputes;

In case of any dispute during the execution of this contract, both parties shall settle it through consultation. If negotiation fails, either party may bring a lawsuit to the people's court where the seller is located.

Fourteen Others:

The liquidated damages, compensation and various economic losses payable according to the provisions of this contract shall be paid to the other party within ten days after the responsibilities are defined, otherwise it shall be treated as overdue payment.

This contract is made in duplicate, one for each party, with the same legal effect.

Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _ _

Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Three articles about simplifying the mode of coal sales contract;

★ Sample coal sales contract (2)

★ Model coal purchase contract