In addition to the construction stage, the design stage and warranty stage of the project are also entrusted to the project supervision, and the supervision rates in these stages are different from those in the construction stage.
Question 2: How to determine the comprehensive rate of supervision service fee? How to determine the comprehensive rate of 10 supervision service fee?
A: We know that the document "Development and Reform Price [2007] No.670". If the billing amount exceeds 65,438+0,000,000 yuan, the billing base price shall be calculated by multiplying the billing amount by the billing rate of 65,438+0.039%. Other expenses not included shall be negotiated by both parties.
The total bid price = 36 million yuan × comprehensive rate of supervision service fee, starting from the document number. [2007] No.670, the comprehensive rate of supervision service fee will disappear! If the * * * guided price project is implemented, it is illegal to look at reality. According to the Eucalyptus Development and Reform Price [2007] No.670 document (ignoring other conditions), the construction supervision service fee in the construction stage is 36 million yuan, that is, interpolation method is adopted.
Charge amount charge base price
30 million yuan 78 1 ten thousand yuan
50 million yuan 6.5438+208,000 yuan
Can you interpolate? What is the basic charge price of 36 million yuan, XX million yuan? Then, it is calculated according to Article 65438 +0.0.5 of the attachment of document No.670 of NDRC [2007]: Charge Standard for Construction Project Supervision and Related Services.
You can't count yourself. Please ask questions or check my answers. Yes. It's time to get off work. I'll give it to you when I am free.
Question 3: Calculation of supervision rate 1.0.5 Construction supervision service fee is calculated according to the following formula:
(1) construction supervision service fee = benchmark price of construction supervision service fee × (1 floating range value)
(2) benchmark price of engineering supervision service fee = benchmark price of engineering supervision service fee × professional adjustment coefficient × engineering complexity adjustment coefficient × elevation adjustment coefficient.
This question has not informed various adjustment factors, and the benchmark price of construction supervision service fee can only be taken according to the provisions of this document and Annex II. It is known that the estimated investment (220 million yuan) of the project with a reduction rate of 20% is between 7 and 8 in Schedule 2, that is, the charge amount is 200 million yuan to 400 million yuan, and the basic charge price is 3.934 million yuan to 7.082 million yuan. The 220 million yuan can only be obtained by inserting method first.
Formula: y = y1+y2-y1÷ x2-x1× x-x1.
Where: y- the required basic charge price;
? Y 1 and Y2-are the low value of 3.934 million yuan and the high value of 7.082 million yuan respectively in the basic price list;
? X 1, X2-The low value in the billing table is 200 million yuan and the high value is 400 million yuan;
Solution: y = 393.4+708.2-393.4 ÷ 40000-20000× 22000-20000 = 393.4+314.8 ÷ 2000× 200 = 393.4+365438.
Construction supervision service fee = benchmark price of construction supervision service fee × (1 floating range value) = 4,258,800 yuan × (1-20%) = 3,407,040 yuan.
Answer: According to the topic, the investment is estimated to be 220 million yuan, down 20%, and the construction supervision service fee is 3,407,040 yuan.
But according to what you said, the estimated investment of this project is 220 million. The level of this institution is quite low, and it has not fully understood the spirit of this document. This question should be provided according to the document number. 1.0.8: the percentage of construction and installation expenses, equipment purchase expenses and joint debugging expenses in the estimated investment of the project. Otherwise, the calculation of this problem is easy to make mistakes.
Please refer to the formula in this question to see if it is useful.
Question 4: zhidao.baidu/question/44198553? What tax does the supervision company need to pay and what is the tax rate?
Question 5: What is the project supervision fee? Project supervision fee refers to the cost of construction project supervision and related services. Common sense and related services of construction projects refer to the supervision personnel accepting the entrustment of the Employer to provide quality, schedule and cost control management and coordination management services in terms of construction project safety, contract and information, as well as related engineering services such as survey, design, equipment supervision and warranty. See Main Contents of Construction Project Supervision and Related Services for the work contents of each stage. The cost of construction project supervision and related services refers to the sum of the cost of construction project supervision (hereinafter referred to as "construction supervision") and supervision and related services (hereinafter referred to as "related services in other stages"). The construction supervision fee is calculated according to the following formula:
(1) project supervision fee = benchmark price of project supervision fee ×( 1+ floating range value)
(2) benchmark price of engineering supervision fee = benchmark price of engineering supervision fee × professional adjustment coefficient × adjustment coefficient of engineering complexity × additional adjustment coefficient. plum
Question 6: What is the charging standard for project supervision? Accordingly, private enterprises and the like speak with their mouths.
Question 7: How is the scope of supervision construction rate determined? In the past, there was a guidance price for the supervision rate, but now this guidance price has been cancelled. It is true that the supervisor can quote at will now.
Question 8: What does the supervision bidding rate 1: 00 mean? How to calculate? Please elaborate. Thank you, dear. What major did you graduate from? For specific charging standards, please refer to the Measures for the Administration of State Supervision Service Charges.
Question 9: How to determine the amount of construction supervision service fee * * * The project supervision fee is based on the document No.670 of the National Development and Reform Commission in 2007.
Private, can also be based on the above documents, but the preferential margin is relatively large.
The answer of the robot downstairs is the formula for calculating the amount of document No.670 issued by the National Development and Reform Commission in 2007.
Question 10: What are the calculation modes of supervision service fees? What models are there for the calculation of supervision service fees?
A: First, the "rate calculation" was basically cancelled. According to article 1.0.5, the engineering supervision service fee is calculated according to the following formula:
2. If the charging amount exceeds 1000000 yuan, the charging base price shall be calculated by multiplying the charging amount by the charging rate 1.039%.
Three, the construction supervision service fee to the construction project budget investment classification quota.
1.0.5 The construction supervision service fee is calculated according to the following formula:
(1) construction supervision service fee = benchmark price of construction supervision service fee × (1 floating range value)
(2) benchmark price of engineering supervision service fee = benchmark price of engineering supervision service fee × professional adjustment coefficient × engineering complexity adjustment coefficient × elevation adjustment coefficient.
Development and Reform Price [2007] No.670 Regulations on Management of Construction Project Supervision and Related Service Charges;
Article 5 The benchmark price of supervision fees in the construction stage of a construction project subject to the * * * guidance price shall be calculated according to the charging standards of construction project supervision and related services, with a floating range of 20%. The employer and the supervisor shall, according to the actual situation of the construction project, negotiate and determine the amount of expenses within the prescribed floating range. Construction project supervision and related service fees shall be subject to market adjustment price, which shall be determined by the employer and the supervisor through consultation.
1.0.5 The construction supervision service fee is calculated according to the following formula:
(1) construction supervision service fee = benchmark price of construction supervision service fee × (1 floating range value)
(2) benchmark price of engineering supervision service fee = benchmark price of engineering supervision service fee × professional adjustment coefficient × engineering complexity adjustment coefficient × elevation adjustment coefficient.
In other words, as mentioned above, if the charging amount exceeds 1000000 yuan, the charging base price shall be calculated by multiplying the charging amount by the charging rate 1.039%.
1.0.8 Billing amount of construction supervision service fee
If the construction supervision service fee adopts the method of charging the construction project budget investment quota, the amount of charging is the sum of the construction and installation project fee, equipment purchase fee and joint debugging fee in the project budget investment, which is the project budget investment. For projects with equipment purchase fees and joint debugging fees accounting for more than 40% of the estimated investment, the construction and installation fees are all included in the invoiced amount, and the equipment purchase fees and joint debugging fees are included in the invoiced amount according to the proportion of 40%. However, the invoiced amount shall not be less than the invoiced amount of projects with the same construction and installation costs, equipment purchase costs and joint debugging costs equal to 40% of the estimated investment of the project.
If the original equipment is used in the project and installation and commissioning services are carried out, the current price of similar equipment at the time of signing the project supervision contract shall be taken as the charging amount of the project supervision service; If there is delayed equipment in the project, the current price of similar equipment at the time of signing the supervision contract shall be deducted as the billing amount of the construction supervision service fee; If there are imported equipment in the project, it will be converted into RMB according to the FOB price of the purchased equipment as the charge for construction supervision services (railway, water transport, highway, hydropower and reservoir engineering). If the engineering supervision service is charged in the form of fixed fees for construction and installation projects, the amount of fees shall be the construction and installation projects in the project budget.
The estimated investment amount of construction project or construction and installation project fee as the charging amount of construction supervision service refers to the charging amount of the project scope agreed in each supervision contract.