It is precisely because of these two reasons that the fluctuation range of resistance of sintered plate dust collector is smaller than that of bag dust collector, and the dust removal system using sintered plate dust collector runs stably. The dust removal process of sintered plate dust collector is different from other dust collectors. It completely washes the dust layer back from the burning plastic board by airflow, and the burning plastic board has no deformation or vibration during this process. When the dust layer leaves the plastic-burning board, it falls in pieces instead of flying dispersedly, so it is not.
Plastic sintered plate (sintered plate) is a wave-type microporous filter plate and the core component of plastic sintered plate (sintered plate) dust collector. It is made by pressing several powdery polymer compounds with special binders, and then forming a porous matrix through strict casting and sintering. Then, 1-2 micron PTFE fluorinated resin is filled in the gap on the parent surface of the plastic sintered board (sintered board) by a special spraying process, and then fixed with a special adhesive. In order to prevent static electricity, conductive substances can be added in advance in the R&D, manufacture and application of polymer compound powder sintered filter core to make anti-static filter plate, thus expanding the application range of products.