(1) Check the clutch and transmission; (2) selecting lubricating oil; (3) selecting fuel; (4) Reinsert the gear ring. Replace the flywheel and the gear ring, and weld the gear ring on the flywheel (5) Use the low-temperature walking device correctly.
Consequences of automobile motor failure:
1. There may be a problem with the seal of the engine piston, resulting in excessive clearance between the piston and the cylinder wall and burning engine oil.
2. It is possible that the engine parts are seriously worn, which makes the gap between parts too large, resulting in different lubricating oil consumption.
3. The lubricating oil used is not up to standard, resulting in abnormal oil consumption.
4 In operation, the coolant temperature is easy to be too high. Once the cooling temperature exceeds the normal value, the engine cannot dissipate heat normally.
It will cause the engine to overheat and affect the normal operation of the engine. The main reasons for the abnormal operation of cooling system are thermostat failure and radiator.
Fault, fan not turning, water tank blocked, etc. The dashboard of the car suggests that when the coolant temperature is abnormal, you should stop to check the coolant.
Whether it leaks. It should be noted that when the car is hot, you can't stop immediately, nor can you add coolant immediately, until the engine temperature is normal.
Reoperation. If there is a large amount of coolant, troubleshoot the engine thermostat and fan cooling.
5 Affected by the high temperature of the engine, the surrounding wires are easy to burn or coke, giving off a pungent smell. It is also possible that during the maintenance process
When a large amount of grease is applied, the odor generated will come out with the increase of engine temperature. When the car was driving, a pungent smell was found.