1 General description of the post:
1. 1 Responsible for production organization and management, preparation and implementation of production plan and production operation plan; Production site management, production scheduling (long section), production foreman, process quality management, and complete various production tasks assigned by the company.
1 Position setting purpose:
2. 1 In order to strengthen production organization management, site management and process management, and improve production efficiency and product quality.
2 work objectives:
3. 1 Realize the production plan issued by the company;
3.2 Implement product quality management policies, technical documents, technical specifications and quality management procedures.
3 management authority:
4. 1 administrative power: organization, scheduling and command of daily process production; Distribution right of production tasks; The right to adjust the temporary production plan; Temporary overtime right and temporary employment right of production personnel (timing).
4 job responsibilities:
5. 1 Implement various production management rules and regulations, and be responsible for illegal command, illegal production and the whole accident;
5.2 Prepare production plans and production operation plans, complete all production and manufacturing tasks on time, and be responsible for the completion of production plans and production operation plans;
5.3 According to the actual production situation and changes in customer demand, make a temporary production operation plan;
5.4 Responsible for arranging production division of labor, process schedule and production personnel deployment; Responsible for missing items in the plan, unbalanced production arrangement, low utilization rate of working hours and chaotic production management;
5.5 Be responsible for leading the implementation of production site management, implementing 5S management standards (see 5S management manual), implementing visual management, and being responsible for 5S management that is not up to standard;
5.6 Be responsible for the management of temporary employment (timing) and determine the tasks and working hours of temporary employment;
5.7 Be responsible for process production quality management (see quality manual);
5.8 Be responsible for the management of production labor discipline, ensure the work starts and ends on time, and supervise employees to observe labor discipline;
5.9 Be responsible for production safety and fire prevention during production, and be responsible for illegal operation and illegal production;
5. 10 is responsible for equipment status, detection, maintenance and maintenance management, and for poor equipment management;
5. 1 1 Be responsible for the performance appraisal and business guidance of direct subordinates, and be responsible for the completion of their work performance.
5 working relationship:
6. 1 Responsible for the company manager;
6.2 Coordinate the production and working relationship with other departments;
6.3 Coordinate the working relationship of each production team;
6.4 Coordinate the production and operation relations among the group companies, external units and companies.
6 work characteristics:
7. 1 environmental features: working on the spot is hard.
7.2 Work characteristics: Work according to the beat, with strong discipline.
7.3 Time characteristics: the working hours are not fixed.
7.4 Balanced features: balanced distribution and strong periodicity.
This leads to the active feature of safety production 7.5: strict enforcement of mandatory work.
7 qualifications:
8. 1 Basic conditions:
8. 1. 1 education background: high school education or above.
8. 1.2 Ideological and moral character: decent, tough, willing to work, able to bear hardships.
8. 1.3 Age Body: over 30 years old, in good health.
8. 1.4 experience: more than 5 years experience in plastic production management.
8. 1.5 personality: cheerful.
8. 1.6 adaptability: rich practical experience in production.
8.2 Skill requirements:
8.2. 1 Hands-on ability: Skilled equipment operation ability.
8.2.2 Comprehensive capacity: arrange production reasonably, give full play to the potential of equipment, and make the best products at the lowest cost.
8.2.3 Communication ability: Be able to make friends with employees.
8 should know:
9. 1 product:
9. 1. 1 Understand the varieties, brands, manufacturers, properties, processes and characteristics of commonly used polymer raw materials;
9. 1.2 Understand the working principle, basic structure, use requirements, performance and application scope of plastic molding equipment; Common equipment fault maintenance knowledge;
9. 1.3 Understand the basic structure, working principle, performance, use and use conditions of plastic molding dies;
9. 1.4 Understand the processing technology of main products; Understand the installation and matters needing attention of plastic molding die; Understand the common equipment and mold failures in production.
9.2 Financial aspects:
9.2. 1 cost knowledge: labor cost; Material cost; Manufacturing cost.
9.3 Marketing:
9.3. 1 Basic knowledge of product sales: customer maintenance and product reputation.
9.4 Labor management:
9.4. 1 basic knowledge of salary: the salary level of the same industry in Changchun, the salary level of the area where the enterprise is located, and the common salary structure.
9.4.2 Basic knowledge of quota: the content of man-hour quota; Working hours quota method.
9.5 computer
9.5. 1 Common knowledge of network application: the function and application scope of enterprise LAN, the key points of LAN maintenance, the concept of network security, and common data communication methods.
9.5.2 Computer application knowledge: the basic structure of hardware, the main factors affecting the safety of use, the main points of daily maintenance and management, and the commonly used computer office system software.
9.6 Industry knowledge:
9.6. 1 industry policy: policies of the state, provinces and municipalities on the plastic industry.
9.6.2 Industry development: the development level of plastic industry, major manufacturers and major supply chains.
9.7 Legal aspects:
9.7. 1 product quality law: legal subject and legal jurisdiction, main legal contents and legal responsibilities.
9.7.2 Consumer Protection Law: legal subject and legal jurisdiction, main legal contents and legal responsibilities.
9.7.3 Labor Law: legal subject and legal jurisdiction, main legal contents and legal responsibilities.
9.7.4 Environmental Protection Law: legal subject and legal jurisdiction, main legal contents and legal responsibilities.
9.7.5 Law on Work Safety: legal subject and jurisdiction, main legal contents and legal responsibilities.
9 should be able to:
10. 1 product:
10. 1. 1 The quality of the material can be judged by surface observation and injection molding process; Whether the pretreatment of materials meets the requirements can be judged according to the injection products;
10. 1.2 can solve the problem of simple equipment in injection molding production; Able to judge common equipment system failures, and organize and guide emergency repair;
10. 1.3 can be produced in different injection equipment according to the actual structure, technical parameters, product material, shape and size of plastic molding mold; Can take corresponding production measures according to mold structure and quality;
10. 1.4 can guide the operator to complete the mold adjustment according to the injection process requirements; Can judge the rationality of injection molding process according to the problems in equipment and injection molding production and make suggestions.
10.2 financial aspects:
10.2. 1 labor cost: improving the utilization rate of working hours will reduce labor costs.
10.2.2 processing expenses: equipment processing will be arranged reasonably according to product technology and processing requirements.
10.3 organization and management:
10.3. 1 will handle the problem according to the organization management procedure.
10.4 marketing:
10.4. 1 customer maintenance: can properly handle the product handling opinions put forward by users.
10.5 computer:
10.5. 1 Master the use of Microsoft office software (word/excel/power point) and independently use the software to complete the production of general documents;
10.5.2 can operate independently on the local area network of the group company, send and receive letters, and process reports and statements.
10.6 legal aspects:
10.6. 1 Grasp the key terms of the labor contract.
10 Daily and Monthly Work Contents:
1 1. 1 in the morning:
1 1. 1 Check whether the night shift production plan is completed as required and whether all records are complete; Whether the equipment and production facilities are operating normally;
1 1. 1.2 Whether the finished products and semi-finished products on the production site are placed in the designated area according to the regulations, whether the waste products and wastes are moved out of the site and placed in the designated location, whether the site is clean and whether there is any mixing phenomenon;
1 1. 1.3 Find out whether there is any temporary change in the sales plan, prepare the production operation plan of the day, and arrange the production tasks of the machines of the day;
1 1. 1.4 Report yesterday's production and today's operation plan, and ask the manager to solve the problem.
1 1.2 Daily work:
1 1.2. 1 Supervise the implementation of the plan and daily progress;
1 1.2.2 Coordinate to solve quality problems in production;
1 1.2.3 Check the implementation progress of various tasks arranged on the same day and solve various problems on the spot;
Whether the rotation is normal;
1 1. 1.2 Whether the finished products and semi-finished products on the production site are placed in the designated area according to the regulations, whether the waste products and wastes are moved out of the site and placed in the designated location, whether the site is clean and whether there is any mixing phenomenon;
1 1. 1.3 Find out whether there is any temporary change in the sales plan, prepare the production operation plan of the day, and arrange the production tasks of the machines of the day;
1 1. 1.4 Report yesterday's production and today's operation plan, and ask the manager to solve the problem.
1 1.2.4 On-site labor discipline management;
1 1.2.5 Check unsafe factors and prohibit illegal operations;
1 1.2.6 Handle and coordinate temporary production matters.
1 1.3 Off-duty time:
1 1.3. 1 Check the completion of the production operation plan (progress of key products) on that day and arrange night shift production;
1 1.3.2 View and count the production data (production account) of the day;
1 1.3.3 Equipment maintenance; Site cleaning; Water and electricity inspection;
1 1.3.4 production scheduling log.
1 1.4 decompose and implement the production plan of the month in early April and calculate the production capacity.
1 1.5 Summarize the completion of the production plan for the current month and prepare the work plan for the next month.