In the era of continuous progress, job responsibilities are becoming more and more important to people, and the clarification of job responsibilities is very important for enterprises to standardize employment and avoid risks. Want to learn to formulate job responsibilities but don't know who to consult? The following are the job responsibilities of mechatronics that I helped you sort out (9 selected articles). Welcome to read the collection.
Mechanical and electrical job responsibilities 1 1. Write the mine electromechanical safety management system, post responsibility system and operation procedures.
Two, responsible for mine mechanical and electrical safety technology, conscientiously implement the "coal mine safety regulations" and mechanical and electrical quality standards.
Three, responsible for the preparation of mechanical and electrical equipment regular maintenance plan, must be a person, time limit for a project, content.
Four, responsible for the preparation of technical accounting, three accounting.
Five, mine mechanical and electrical equipment "four rates" (i.e., intact rate, to be repaired rate, accident rate and misfire rate) statistics once a month.
Six, mine electrical equipment three-level protection setting calculation.
Seven, responsible for the overall planning of mechanical and electrical equipment under the mine, and adjust at any time according to the replacement of mining (power supply, drainage, communication, transportation, mining).
Eight, the preparation of mechanical and electrical installation safety measures and construction requirements.
Nine, responsible for drawing mechanical and electrical drawings.
Ten, responsible for the work of electrician training, training plan, and organize their implementation.
Eleven, responsible for mine mechanical and electrical equipment selection calculation.
Mechanical and electrical responsibilities 2 Under the leadership of the engineering manager, be responsible for the maintenance, operation technology and overall management of equipment and facilities in Xintiandi Plaza.
Specific responsibilities are as follows:
1, responsible for the preparation of the monthly maintenance and operation plan of the equipment and facilities under its jurisdiction; The renovation plan shall be reviewed by the engineering manager, responsible for organizing the implementation and technical inspection and inspection.
2. Be responsible for organizing the use, maintenance, maintenance, operation and inspection of the equipment and facilities under its jurisdiction, solving relevant technical problems and ensuring that the equipment is in good working condition.
3. Responsible for supervising the operators to strictly abide by their job responsibilities and strictly implement the operating procedures to ensure the normal operation of equipment and facilities.
4, found in the equipment maintenance, operation and maintenance of equipment failure should immediately report to the engineering manager, and organize the investigation and analysis of equipment and facilities failure reasons, put forward treatment opinions and corrective measures to prevent similar accidents from happening again.
5. Train employees on professional knowledge and working ability once a month. Organize employees to learn professional skills, constantly improve their technical quality and business level, and conduct business assessment and on-site training from time to time.
6. Assist the engineering manager in the daily management of the electromechanical department, deployment of operation and maintenance personnel and logistics support.
7. Responsible for the performance appraisal of subordinates.
8. Complete other tasks assigned by superior leaders in time.
Mechanical and electrical responsibilities 3 1, responsible for safety supervision, safety protection measures, management of all kinds of fire-fighting equipment, supervision and elimination of fire hazards.
Caring for every employee and building a harmonious team requires your own authority.
3. Participate in the company's production planning and scheduling meetings and other meetings, and convey and put forward relevant suggestions.
4. Responsible for daily feeding, warehousing of finished processing materials in the workshop, quality feedback, problems and plans.
5, reasonable plan daily workshop output, team output.
6. Reasonably plan the processing flow of different orders.
7, responsible for the daily management of the workshop and object distribution and application.
8. Control costs, improve economic benefits, and strictly control the responsibility of auxiliary materials.
9, responsible for cooperating with the monitor, host, adjust the machine and impart professional knowledge, * * * cooperate with improvement.
10, responsible for the morning meeting and weekly meeting, (reflecting problems, solving problems, summing up deficiencies and improving deficiencies) encouraging the team to rely on and trust the workshop.
1 1, responsible for accurate, pass, help, take and answer.
12, responsible for the implementation of the company's various systems, fair, just, open and transparent.
13, complete the plan issued by superior leaders with good quality and quantity.
14, responsible for supervising equipment maintenance.
15, responsible for the daily consumption of tools.
16, do a good job in logistics support and orderly production, * * * has created, * * * has made a leap.
Responsibilities of Mechanical and Electrical Engineer Article 1 Responsible for the daily overhaul and maintenance of all mechanical and electrical system facilities and equipment within the jurisdiction to ensure the normal operation of mechanical and electrical facilities and equipment.
Article 2 Be responsible for the installation, overhaul and maintenance of telephone, lighting and other facilities and lines in this unit.
Article 3 Be responsible for the safe production and safe electricity use of the unit, and assist and cooperate with the relevant departments of the unit to conduct safety electricity use inspection.
Article 4. Instruct relevant personnel of the unit to use relevant electromechanical facilities and equipment correctly according to the operating procedures to ensure personal and equipment safety.
Article 5 Be responsible for the inspection and dust removal of the electromechanical system facilities and equipment of the unit, and assist and cooperate with the cost control and budget of the electromechanical system.
Article 6 Work in strict accordance with relevant operating procedures, put an end to illegal operations and eliminate unsafe hidden dangers in time.
Seventh, we should strengthen our own study, be honest and self-disciplined, and prevent and control risks.
Article 8 Do a good job in the inspection, maintenance and repair of technical files of facilities and equipment within my business scope.
Article 9 Complete the monthly work report.
Tenth to complete other tasks assigned by the leadership.
Mechanical and electrical job responsibilities 5 The mechanical and electrical technician of the comprehensive excavation team is the first person responsible for the mechanical and electrical technology management of this unit, and is responsible for the management of mechanical and electrical equipment and technology in the whole region. Must be familiar with the laws, regulations and related professional knowledge about safety in production, and after training according to law, should be conscientious in their work, and earnestly do a good job in the electromechanical management of their own units.
I. Job responsibilities
Article 1 Under the leadership of the team leader, the mechanical and electrical technician is responsible for assisting the mechanical and electrical vice captain in the technical guidance of mechanical and electrical equipment, focusing on the preparation of spare parts plan and construction measures, the control of limited materials and minor repair costs, the supply control of spare parts, and the business training of employees.
Article 2. Implement the "Three Big" regulations, the equipment regular maintenance system and the instructions and regulations of the superior on electromechanical aspects.
Article 3 Be responsible for checking the status and safety protection measures of mechanical and electrical equipment and related facilities at the production site, identifying the hazards of various activities and workplaces of the unit and feeding them back to the safety supervision office in time, conducting risk assessment in time, and organizing the formulation of risk control measures according to the risk assessment results, the actual production site, relevant laws and regulations and other requirements. Improve the occupational health and safety management plan, formulate corresponding control measures for risks, accidents, incidents and nonconformities that need to be controlled, and report the implementation. Be responsible for reviewing the annual, quarterly and monthly consumption plans and maintenance plans of spare parts, accessories and special tools.
Article 4 the preparation of equipment transportation, installation, use, demolition of safety technical measures, and organize their implementation.
Article 5 is responsible for the technical management and drawing of mechanical and electrical equipment, accessories and materials.
Article 6 Be responsible for solving technical problems in the electromechanical field and popularizing new technologies and experiences in the electromechanical field.
Article 7 is responsible for reviewing equipment operation and maintenance records, and preparing equipment maintenance design.
Article 8 to participate in the equipment integrity inspection and safety inspection, to find out the mechanical and electrical equipment problems, to organize timely treatment.
Article 9 Always go to the site to learn about the installation, use and maintenance of mechanical and electrical equipment, find problems and deal with them in time to improve the equipment integrity rate.
Article 10 is responsible for reviewing the equipment account and the operation records of mechanical and electrical equipment, and checking the storage and consumption of underground spare parts.
Article 1 1 is responsible for organizing equipment maintenance, presiding over electromechanical accident analysis, proposing improvement measures for existing problems, and participating in equipment integrity inspection organized by higher authorities.
Article 12 Attend the team affairs meeting, study the electromechanical problems of the team, put forward rectification suggestions in time, and be responsible for holding regular electromechanical management meetings to analyze and solve key electromechanical problems.
13 is responsible for organizing the handover procedures of electromechanical aspects and related business contacts.
Article 14: Ensure that the procedures and measures before the commencement of each project are complete, and stick to one procedure and one measure for each project.
15 is responsible for the pre-job training and technical business training of the electromechanical post personnel of the district team, and the post operation can be arranged only after passing the examination.
Article 16 goes deep into the site to guide the use and maintenance of working face equipment and the standardized operation of employees.
Article 17: Corrective measures shall be implemented for the potential safety hazards identified by mechanical and electrical equipment.
Article 18 Attend relevant safety production meetings on time and put forward specific suggestions.
Article 19 assists the team leader in organizing the electromechanical quality standardization activities of his team.
Article 20 Organize investigation and study, sum up the advanced methods and experiences of electromechanical management of the team in time, learn new knowledge, and popularize new technologies and experiences.
Article 2 1: We must do our duty and put an end to the phenomenon of "three violations".
Mechanical and electrical job responsibilities 6 1, mechanical and electrical deputy mine safety production responsibility system
First, under the leadership of the mine manager, assist the deputy mine manager to install and manage the mechanical and electrical equipment of the whole mine.
Two, truly implement the rules and regulations of the party and the state on the installation of mine mechanical and electrical equipment, and implement the resolutions of the collective leadership of mines and various rules and regulations.
Three, organize the preparation of mechanical and electrical work plan, arrange mechanical and electrical work, complete mechanical and electrical tasks on time with good quality and quantity, and be responsible for supervision and inspection.
Fourth, do a good job in the basic management of electromechanical equipment installation, so that the electromechanical business team can meet the needs of production well.
Five, in-depth production and construction of a line to understand the operation of mechanical and electrical equipment and the service of mechanical and electrical teams, timely adjust and correct the shortcomings in their work.
Six, responsible for supervising the installation, management, use and maintenance of water, heating and circuits in the whole mining area, and organizing regular inspection, overhaul and maintenance to ensure the needs of production, construction and life.
Seven, have the right to put forward opinions on the adjustment and replacement of personnel for each mechanical and electrical post, and be responsible for establishing and improving the mechanical and electrical installation system to ensure that the mechanical and electrical equipment meets the coal mine safety standards and operates well.
Eight, conscientiously do a good job in mine mechanical and electrical safety, to ensure mine equipment and personal safety.
Nine, to participate in the preparation of the department responsible personnel, technical participation and business management guidance.
Ten, deal with the relationship between mechanical and electrical work and the competent department, and do a good job in the measurement statistics, statements, ledgers and cards of mechanical and electrical work on time. Familiar with comprehensive business work.
Eleven, report to the mine manager, timely complete the temporary tasks assigned by the leadership.
2, mechanical and electrical deputy mine manager "one ventilation and three prevention" post responsibility system
1. Be responsible for the arrival, construction and acceptance of mechanical and electrical equipment related to "One Ventilation and Three Preventions" and ensure its safe operation.
Two, responsible for organizing regular maintenance of mine mechanical and electrical equipment, to eliminate electrical explosion.
Three, responsible for organizing and improving the protection against the "three major fires".
Four, the implementation of the responsibility system, put an end to the local ventilator unplanned power outage and stop the wind, to ensure the normal operation of the main ventilator, to ensure the safety of mine power supply.
Five, coordinate the power supply business department to supply the equipment and accessories needed for ventilation surface in time.
Six, to assist the ventilation department to ensure that the local fan power supply to achieve "three special two locking" and "double fan dual power automatic switching".
7. Participate in disaster relief work.
Mechanical and electrical job responsibilities 7 1. The section chief is the first person in charge of production safety in the mechanical and electrical department and is fully responsible for the work of this unit.
2. Under the leadership of the mechanical and electrical mine manager, seriously implement the instructions, instructions, documents and policies of the superior on mechanical and electrical work, and attend the mine dispatching meeting on time. Hold a regular electromechanical meeting once a week, carry out safety activities once a week, study and arrange the work content of each professional group, and check and assess the safety production situation of each unit of the electromechanical system.
3. Strengthen mechanical and electrical management, and establish and improve various management rules and regulations within the mechanical and electrical system. And regularly check the implementation system of each unit of the electromechanical system, and put forward suggestions for improvement in view of the existing problems; Organize to formulate and review the annual disaster prevention plan of electromechanical system.
4. Establish and improve the equipment management and maintenance system, and be responsible for the basic work management and professional management of mechanical and electrical equipment in the whole mine. Organize the formulation of medium-and long-term technical planning and annual technical planning of this system, and conduct feasibility analysis on major equipment repair and large-scale renovation projects.
5. Hold the equipment maintenance meeting on time, balance the maintenance items, arrange the maintenance safety work, and appoint someone to be responsible for the on-site supervision and inspection.
6. Go deep into the site to regularly check the work progress and solve the problems in production in time; Go to work according to the prescribed cycle, regularly check the operation of equipment in the main engine room and cavern, post labor discipline and civilized production status, and stop all kinds of "three violations".
7. Strengthen the labor safety technical education for employees, conduct regular business technical training, organize regular safety inspections, timely investigate potential safety hazards in production, and take corresponding effective safety measures to prevent personal and mechanical and electrical equipment accidents.
8. Participate in the analysis of mechanical and electrical accidents, find out the cause of the accident and the responsibility system; Put forward treatment opinions and formulate preventive measures.
9. If equipment or personal accidents are caused by poor work arrangement and poor management, the leadership responsibility shall be investigated.
Mechanical and electrical responsibilities 8 1, under the leadership of the department manager, complete the business management within the scope of division of responsibilities, and be responsible for the standardized management such as three controls, two pipes and one coordination of the mechanical and electrical engineering of the project; Strengthen management communication with engineering units to ensure that the construction tasks are completed as planned, the quality is guaranteed and the cost is controlled.
2. According to the internal division of labor of the engineering department and the handover standard of the project, understand the varieties and practices of the market-related supporting materials for finished products, optimize and refine the specific practices of this major in the whole process on the premise of meeting the specifications and related use requirements, so as to achieve the purpose of clarifying the specific practices, reducing investment and controlling costs, review the drawings of related projects, participate in the proofreading and auditing of construction organization design and construction technical scheme, and participate in bidding, design disclosure and joint review of drawings.
3, often in-depth engineering site, according to the design, construction and acceptance specifications, drawings and construction organization design requirements to check the construction progress, quality and construction technology, found that the problem timely adjustment and processing; Participate in the research and discussion of technical problems on the construction site, and put forward opinions and suggestions on treatment and solutions.
4. Participate in the acceptance of important working procedures and parts, as well as the initial inspection and completion acceptance of the project.
5. Participate in the design disclosure and audit of construction organization design and scheme, be responsible for monitoring and checking the quality tracking management of on-site building materials, components, products, decorative materials, engineering materials and equipment, and monitor and participate in the visa for important partial projects, concealed works, structural tests, templates and model houses of construction projects.
6. Check the construction progress, urge the construction unit to organize the construction as planned, participate in arranging the production plan and attend the production meeting held by the company.
7, management and coordination with the construction unit, supervision company and other engineering parties; Assist the company to do a good job in supplier qualification examination, materials supplied by Party A, material supply implementation and other related work.
8, according to the requirements of the municipal urban construction archives, do a good job in the collection and filing of engineering data and the finishing and submission of completion data.
9. Participate in the handling of engineering quality and safety accidents, urge the project company to strengthen on-site construction management, civilized construction and standardized management, find problems in time and actively put forward improvement opinions and related suggestions to the company.
10, cooperate with and follow up the relevant procedures related to this major, such as construction application, testing, certification and acceptance.
1 1. Complete other tasks assigned by the company and leaders.
Mechanical and electrical job responsibilities 9 1, conscientiously implement the party and the state's production safety guidelines, laws, regulations and various rules and regulations formulated by the mine.
2, responsible for the preparation of the team's various rules and regulations and measures, prepare the team's material consumption plan, equipment maintenance plan, draw the electrical diagram within the jurisdiction of the team, and do a good job of collecting, sorting, archiving and keeping the team's technical data.
3, completes the inoue power supply, ascension, wind pressure maintenance and management, eliminate hidden dangers in time, to ensure the normal operation. Strengthen the construction of quality standardization and realize the assessment target.
4, strict material cost management, increase recycling, repair the old and waste.
5. Go deep into the site, grasp the safety production trends, and timely guide and deal with the problems found.
6. Do a good job in team professional and technical training and the activities of "learning, practicing, comparing and pushing" for each type of work, and improve the overall professional and technical quality of employees through passing, helping and bringing.
7, learning business, improve their own quality, enhance the sense of responsibility.
8, complete the tasks assigned by the leadership.
;